Modelling of polymer aggregates in solution

The self-consistent mean field model of Scheutjens and Fleer is used to model spherical aggregates of homopolymers and monomer—polymer particles in solution. For homopolymer aggregates we found that the chain ends are preferentially located at the exterior side of the polymer/solvent interface. The distribution of the end segments may be an important parameter in latex film formation. For monomer—polymer particles a “core-shell” structure is found with an extended core containing a monomer—polymer mixture and a thin shell a few nanometres thick strongly enriched with monomer. The monomer-enriched shell seems to function as a solvating envelope for the dangling chain ends. These results are compared with other simulations based on a single chain in a spherical-cavity model.     

表面引发原子转移自由基聚合方法合成Fe3O4/PMMA复合纳米微粒

采用表面引发原子转移自由基聚合方法合成了核壳结构的磁性高分子纳米微粒. 作为聚合反应引发剂的3-氯丙酸, 首先与油酸修饰的Fe3O4纳米微粒表面的部分油酸置换, 然后在Fe3O4纳米微粒表面引发甲基丙烯酸甲酯聚合, 合成的纳米复合材料用TEM, FTIR, XRD和DSC表征. 磁性测试结果表明, 所制备的磁性高分子纳米微粒仍具有超顺磁性, 但由于聚合物的存在, 其饱和磁化强度降低.     

Particle-size distribution of polycyclic aromatic hydrocarbons in urban air in southern Spain

The size distribution of polycyclic aromatic hydrocarbons (PAH) was determined for airborne particles from a large city with high vehicular traffic. The analytical method was optimised and validated using NIST standard reference material (SRM 1649a Urban Dust). The 16 priority PAH listed in the US-EPA were Soxhlet-extracted from filtered particulate matter and then fractionated using on-column chromatography. The aromatic fraction was quantified by gas chromatography-mass spectrometry. Real samples of particles collected in Seville (Spain) were analysed using the validated method. Values for the total concentration of PAH in the air, as well as the concentrations of each PAH in six particle-size ranges were obtained. Values of the PAH in TSP, PM₁₀, PM_2.5 and PM₁ were assessed.     

Production of citric acid using immobilized conidia of Aspergillus niger

Conidia of Aspergillus niger were immobilized in calcium alginate gel for the production of citric acid. First, the type of the preactivation medium, together with the preactivation period, was investigated. It was found that A. niger requires a 2-d preactivation period at a 0.05 g/L NH₄NO₃ concentration. Second, preactivated cells were used to determine the effects of nitrogen concentration and the flow rate of oxygen and air on the production of citric acid. Maximum citric acid production was attained with medium containing 0.01 g/L of NH₄NO₃. The rate of citric acid production in the nitrogenous medium was 33% higher when oxygen was used instead of air during the production phase. This corresponds to an increase of 85% when compared to production when neither oxygen nor air was fed into the system. In the nonnitrogenous medium citric acid concentration remained similar regardless of the use of air or oxygen. However, in the nonnitrogenous production medium, citric acid production was not influenced considerably when oxygen was used instead of air. The advantage of using immobilized cells is that production is achieved easily in the continuous system. Therefore, citric acid production was also tested using a packed-bed bioreactor, and an increase in productivity by a factor of 22 was achieved compared to the batch system.     

Half-sandwich and mixed-ring uranium complexes

The monocyclooctatetraene uranium complex [U(COT)(I)₂(THF)₂] (COT=η-C₈H₈; THF=tetrahydrofuran), isolated from the reaction of bis(cyclooctatetraene)uranium with iodine, is a precursor for the synthesis of the alkyl derivatives [U(COT)(CH₂Ph)₂i (HMPA) ₂], [U(COT)(CH₂SiMe₃)₂(HMPA)] (HMPA=hexamethyl phosphorous triamide) and [U(COT)CH₂SiMe₃)₃] [Li(THF)₃] and of the mixed-ring compounds [U(COT)(η-C₅R₅)(I)] (R=H or Me). The last were used to prepare the amide and alkyl complexes [U(COT)(η-C₅H₅)(N{SiMe₃}₂)] and [U(COT)(η-C₅Me₅)(CH₂SiMe₃)].     

Synthesis of Molecularly Imprinted Polymer Particles by Suspension Polymerization in Silicon Oil

Molecular imprinting is a method to prepare polymers with recognition site of desired and predetermined selectivity1. Molecularly imprinted polymers (MIP) are prepared by copolymerizing functional and cross-linking monomers in the presence of a molecular …     

Relativistic bond lengthening of UO 2 2+ and UO2

Summary Relativistic calculations on UO₂ [1] have shown that relativity leads to substantial bondlengthening in this compound, in contrast to the bond contraction found almost exclusively for other compounds. The bond lengthening isnot caused by the relativistic expansion of the 5f valence AO of U, which is the primary bond forming orbital on U in UO₂. The origin of the bond lengthening can be traced back to the semi-core resp. subvalence character of the U 6p AO. The valence character of 6p shows up in an increasing depopulation of the 6p upon bond shortening, and hence loss of mass-velocity stabilization. The core character of 6p shows up in large off-diagonal mass-velocity matrix elements 5p|h _MV|6p which are shown to have an overall bond lengthening effect. The larger expansion in UO₂ than in UO ₂ ²⁺ is due to destabilization of U levels in UO₂, caused by repulsion of the two additional 5f electrons.The present analysis corroborates the picture of relativistic bond length effects of Ref. [2].     

Fluctuation-dominated kinetics in the a+b→0 reaction between immobile particles

We consider the accumulation of immobile particles landing on a one-dimensional lattice and annihilating via the A + B 0 bimolecular reaction. Here we focus on short-range interactions with cutoff. We investigate through computer simulations both the kinetics of the particles' accumulation and also their spatial distribution. The relation between the exponents describing the growth of the particles' concentration and the correlation length of their distribution shows that the kinetics of accumulation is fluctuation-dominated.This work is dedicated to Prof. George H. Weiss.     

An effective cross-linking of polymer layer on monodisperse, poly(maleic anhydride-styrene)-modified colloidal silica particles and properties of the composite

Summary  The cross-linkings of the surface polymer layer on mono disperse, poly(maleic anhydride-styrene)-modified silica particles by the reaction with diisocyanate were studied. The extent of cross-linking was estimated by the weight decrease by immersing the particles in the buffer solution of pH 2.0, 4.0 and 9.0 at a room temperature for 24 h. The reaction of the polymer-modified silica with 1,6-diisocyanatohexane afforded relatively stable composite particles which lost less than 5 wt% of the polymer in aqueous solution in the pH range 2.0–9.0. The diisocyanate was a preferable cross-linker to 2,4-diisocyanatotoluene in terms of stability in acidic or basic aqueous solution. The flexibility of the cross-linker molecule possibly plays an important role in the cross-linking reaction. The carboxyl and amino groups were formed by treating the cross-linked composite particles with diluted HCl solution; 5–6 and 0.5–1.1 μmol g^-1, respectively. The cross-linked composite particles exhibited the characteristic property of ζ-potential, −44 to −47 mV and −102 to −107 mV in a neutral aqueous solution and ethanol, respectively. Received: 26 May 1997 Accepted: 4 August 1997     

U(IV)/LN(III) unexpected mixed site in polymetallic oxalato complexes. Part II. Substitution of U(IV) for Ln(III) in the new oxalates (N2H5)Ln(C2O4)2·nH2O (Ln=Nd, Gd)

Two new hydrazinium lanthanide(III) oxalates, (N₂H₅)[Nd(C₂O₄)₂(H₂O)]·4H₂O (1) and (N₂H₅)[Gd(C₂O₄)₂(H₂O)]·4.5H₂O (2) have been prepared and their crystal structures determined by single-crystal X-ray diffraction. The crystal structures were solved by the direct methods and Fourier difference techniques, and refined by a least-squares method on the basis of F² for all unique reflections. Crystallographic data: 1, triclinic, space group , , b=9.762(4), , α=62.378(5), β=76.681(5), γ=73.858(5), Z=2, R₁=0.0335 for 172 parameters with 3430 reflections with I?2σ(I); 2, triclinic, space group , , b=9.51(3), , α=62.11(4), β=76.15(5), γ=73.73(5), Z=2, R₁=0.0325 for 172 parameters with 1742 reflections with I?2σ(I). The two isotypic structures are built from a three-dimensional (3D) arrangement of lanthanide and oxalate ions. The lanthanide atom is coordinated by eight oxygen atoms from four tetradentate oxalate ions and one aqua oxygen. Alternating lanthanide and oxalate ions form six-membered rings that delimit tunnels running down three directions and occupied by hydrazinium and water molecules. Starting from these lanthanide(III) compounds two isotypic mixed Ln(III)/U(IV) oxalates, (N₂H₅)_0.75[Nd_0.75U_0.25(C₂O₄)₂(H₂O)]·4.5H₂O (3) and (N₂H₅)_0.75[Gd_0.75U_0.25(C₂O₄)₂(H₂O)]·4H₂O (4), are obtained by partial substitution of Ln(III) by U(IV) in the nine-coordinated site, the charge excess being compensated by removal of monovalent ions from the tunnels. Finally, using Na⁺ gel, two mixed Ln(III)/U(IV) sodium oxalates, Na_0.5[Nd_0.5U_0.5(C₂O₄)₂(H₂O)]·3H₂O (5) and Na_0.65[Gd_0.65U_0.35(C₂O₄)₂(H₂O)]·4.5H₂O (6) have been obtained without any change in the 3D framework.