Rapid and simultaneous determination of imidazolium and pyridinium ionic liquid cations by ion-pair chromatography using a monolithic column

A method for rapid and simultaneous determination of imidazolium and pyridinium ionic liquid cations by ion-pair chromatography with ultraviolet detection was developed.Chromatographic separations were performed on a reversed-phase silica-based monolithic column using 1-heptanesulfonic acid sodium-acetonitrile as mobile phase.The effects of ion-pair reagent and acetonitrile concentration on retention of the cations were investigated.The retention times of the cations accord with carbon number rule.The method has been successfully applied to the determination of four ionic liquids synthesized by organic chemistry laboratory.     

二甲酚橙-溴酸钾体系催化动力学光度法测定微量甲醛

在硫酸介质中,溴酸钾在甲醛的催化作用下能氧化二甲酚橙褪色,其褪色程度与甲醛含量成正比,从而建立了光度法测定微量甲醛的新方法。方法的最大吸收波长为435 nm,在50℃水浴中反应10 min,甲醛含量在0～20μg/mL内呈线性关系。方法应用于废水中微量甲醛的测定,相对标准偏差为4.34%,回收率在91.0%～102.8%之间。     

Spectrophotometric,potentiometric, and conductometric studies of binary complex formation between copper(II) and three forms of vitamin B6 in aqueous solutions

This article reports the detailed study concerning the mode of binding of three forms of vitamin B₆, pyridoxamine (pm), pyridoxine (pn), and pyridoxal (pl), with Cu(II) in aqueous solutions using three independent methods: potentiometry, conductometry, and UV–vis spectroscopy. The stability constants of complexes formed between copper(II) and vitamin B₆ were investigated by potentiometric titration in 0.1 M KNO₃ ionic medium at 25 °C. While drawing the relations between molar conductance and the ratio of metal to ligand concentrations, different types of lines were obtained indicating the formation of 1 : 1 and 1 : 2 stoichiometric compounds. The stability constants have been determined using EQUID and CVEQUID computer programs and the obtained results were in agreement. The relatively high values of stability constants of Cu(II)-vitamin B₆ complexes obtained from three independent methods in comparison to those with other competing cations suggest that the complexes studied are relatively stable in aqueous solutions.     

Chloro complexes of cobalt(II) in aprotic solvents: stability and structural modifications due to solvent effect

Cobalt(II) chloro complexes were studied in aprotic solvents, namely, dimethylsulfoxide (DMSO), dimethylformamide (DMF), and propylene carbonate (PC). The measurements were performed spectrophotometrically in UV–visible–IR region at 25°C and at constant ionic strength: I = 1 mol L^?1 in DMSO and DMF, and 0.1 mol L^?1 in PC. Different models were tested and the model 1 Elleb, M, Meullemeestre, J, Schwing, MJ and Vierling, F. 1980. Inorg. Chem., 19: 2699[Crossref], [Web of Science ®] , [Google Scholar], 2 Elleb, M, Meullemeestre, J, Schwing, MJ and Vierling, F. 1982. Inorg. Chem., 21: 1477[Crossref], [Web of Science ®] , [Google Scholar], 3 Khan, MA, Meullemeestre, J, Schwing, MJ and Vierling, F. 1983. Polyhedron, 2: 459[Crossref], [Web of Science ®] , [Google Scholar], 4 Amuli, C, Meullemeestre, J, Schwing, MJ and Vierling, F. 1983. Inorg. Chem., 22: 3567[Crossref], [Web of Science ®] , [Google Scholar], i.e., that of four mononuclear successive complexes was retained. Stability constants of the identified complexes were determined and they increase inversely with the Gutmann's donor number of the solvents. Calculated electronic spectra are reported and the effect of solvents on the spectral properties are discussed. The symmetry of tetrachlorocobaltate is strictly T_d.     

Spectrophotometric Determination of Iron(III) as Azide Complexes in Aqueous Tetrahydrofuran

Abstract

A simple, sensitive and alternative method for the spectrophotometric determination of iron(III) has been established. The procedure is based on the formation of iron-azide complexes in 60% (v/v) tetrahydrofuran/ water medium. The high sensitivity obtained in this method is due to the use of an interesting absorption band not previously reported in the literature. In the recommended conditions, absorbances for the ferric complexes are measured at 400 nm where the molar absorptivity is 1.52 × 10⁴ 1 mol^?1 cm^?1. The organic solvent used increases the sensitivity and the stability of the measurements. The precision is shown by the average deviation of about 0.3%. This system obeys Beer's law and is suitable for iron(III) determination in the concentration range from 0.6 to 3.2 mg 1^?1 (ppm). The best experimental conditions were determined studying the different factors involved. The influence of various diverse ions was also studied.     

Determination of Traces Of Bismuth in Water with Polyurethane Foak Thin-Layer Spectrophotometry

Abstract

A method for the spectrophotometric determination of bismuth is described. The method is based on using polyether polyurethane foam sorbent as a favourable matrix. Sorption of the bismuth iodide complex into the foam thin layer contributed into substantial improvement of the measured absorbance value of the coloured species. In this way quite satisfactory results were achieved, the average recovery amounts to 105.25%.     

Second Derivative Spectrophotometric Determination Of The Dissociation Constant Of Covalently-Bound Phenol Red-Polyacrylamide

Abstract

Knowledge of possible variability in the dissociation constant (pKa) among preparations of phenol red-polyacrylamide was needed during development of a fiber optic probe to monitor fetal blood pH. Determination of the pKa through absorbance-wavelength spectra on opaque 50% glycerol suspensions of phenol red-resin required second derivative spectrophotometry. The apparent pKa was 8.0 for both the dye and several batches of its resin derivative. Spectrophotometry of comparable aqueous solutions of phenol red yielded a pKa of 7.78 ± 0.02, at μ=0.25M.     

The Spectrophotometric Determination of gallium (III) Using O-Hydroxyhydroquinonephathalein in the Presence of Surfactant Micellar

Abstract

The color reaction systems between various metal ions and o-hydroxyhydroquinonephthalein(Qnph) as a xanthene dye, in the presence of various water soluble surfactants(cationic. anionic, non-ionic surfactants) alone or in combination, were systematically investigated at various pH areas. The coexistence of cationic and non-ionic surfactants, such as Zephiramine (Zp) and Brij 35, was most effective for the color reaction systems between Qnph and gallium(III), as a metal ion, at weakly acidic media. By using the color reaction between Qnph and gallium(III) in the coexistence of Zp and Brij 35, an improved and sensitive spectrophotometric determination of gallium(III) was proposed as method 1, and the calibration curve was rectilinear in the range of 0～7.0 μg of gallium(III) in a final solution of 10ml at pH 6.4. The apparent molar absorptivity was 1.5 × 10⁵ 1 mol^?1 cm^?1 at 560 nm, and the interference of foreign ions was decreased by ½～ ¼-fold in comparison with other methods; method 3—in the presence of Zp alone at pH 6.4, method 2—in the presence of Tween or Brij 35 alone, without Zp, at pH 8. Thus, the use of Qnph as a xanthene dye and the combination of cationic and non-ionic surfactants, such as Zp and Brij 35(perhaps, on the mixed micellar media), was most effective and its color reaction was used for the separative assay of gallium(III).     

Spectrophotometric and Spectrofluorimetric Determination of Cyclophosphamide and Its Isomer Ifosphamide

Abstract

Based on the condensation reaction between amino groups of either cyclophosphamide or ifosphamide with the carbonyl group of ninhydrin, giving coloured and fluorescent products, a spectrophotometric procedure for both drugs is suggested in the range from 30 to 90μg ml^?1 at 564 nm, with accuracies of 100.6 ± 1.06% and 100.8 ± 1.02% for cyclophosphamide and ifosphamide, respectively. Also, a spectrophotometric procedure for both drugs is proposed in the range from 1.2 to 3.6 μg ml^?1 at 465 nm and 485 nm for cyclophosphamide and ifosphamide, respectively, using 380 nm as an excitation wavelength for both drugs with accuracies of 100.4 ± 1.83% and 99.5 ± 1.64%, respectively. This condensation reaction, however, does not differentiate between the two isomeric drugs.

Another new method is, therefore, suggested. It depends on the fact that the secondary amino group of ifosphamide is hindered electronically and sterically, while the nucleophilic amino group of cyclophosphamide reacts with the nitrosyl group of sodium nitroprusside molecule, giving a bluish green colour measurable at 708 nm. This colour is used for the determination of cyclophospahmide in the presence of its isomer ifophamide in the range from 0.2 to 1 mg ml^?1 with repeatability of 99.2 ± 1.49%.

The suggested procedures are applied successfully to pharmaceutical formulations of cyclophosphamide and ifosphamide, and their validities are assessed by applying the standard addition technique. The results obtained by applying the proposed procedures are statistically analyzed and compared with those obtained by adopting the United States Pharmacopoeial method.     

Determination of Anafranil in Pharmaceuticals by Difference and Difference-Derivative Spectrophotometry

Abstract

Difference (ΔA) and difference first- (ΔD1) and second- (ΔD2) derivative spectrophotometric methods are described for the assay and quality control of anafranil, a powerful antidepressant, in pharmaceutical formulations.

The procedures are based upon the measurement of ΔA, ΔD1 and ΔD2 of anafranil in alkaline solutions against their acidic solutions as blanks.

Interferences of the excipients and diluents or irrelevant absorptions are nullified. Calibration graphs of ΔA, ΔD1 and ΔD2 versus the concentration of the drug showed linear relationships up to 10 μg/ml, with correlation coefficients ranging from 0.9998 to 0.9999.

Detection limits at p = 0.01 level of significance were calculated to be 0.060 (ΔA), 0.056 (ΔD1) and 0.063 (ΔD2) μg/ml. The limits of quantification were 0.45 (ΔA), 0.36 (ΔD1) and 0.81 (ΔD2) μg/ml.

The procedures have been successfully applied to the determination of anafranil in synthetic samples and in commercial pills and injections for this drug with high reliability and repeatability.