Assembly-enhanced triplet-triplet annihilation upconversion in the aggregation formed by Schiff-base Pt(Ⅱ) complex grafting-permethyl-β-CD and 9,10-diphenylanthracence dimer

Water-soluble triplet sensitizer with permethyl-β-cyclodextrin(PMCD) grafting on a Schiff-base Pt(Ⅱ)complex(Pt-2),in which PMCD unit serves as a host for binding the acceptors and the Schiff-base Pt(Ⅱ)complex serves as a triplet sensitizer,was synthesized to investigate the effect of supramolecular complexation and assembly on the triplet-triplet annihilation upconversion emission in water.9,10-Diphenylanthracence(DPA) carboxylate(A-1) and its dimer(A-2) in which two DPA carboxylate were covalently linked with an alkyl chain were synthesized as triplet acceptors which also play a role of guest molecules for PMCD.A-1 and A-2 showed high affinity with PMCD,and A-2 can readily aggregate in water and form micron sized assemblies due to the hydrophobic effect and π-π stacking of anthracene core in A-2.The efficiency of TTA-UC was demonstrated to be enhanced by a synergistic effect of host-guest complexation of Pt-2 with A-2 and the self-aggregation of the acceptor A-2,which facilitated the energy transfer and energy fusion among donor and acceptor.     

Er3+单掺、Er3+/Yb3+共掺杂Ca12Al14O32F2的 制备及上转换发光性质

利用高温固相法成功制备了Er~(3+)单掺、Er~(3+)/Yb~(3+)共掺杂Ca_(12)Al_(14)O_(32)F_2上转换发光样品。在980 nm激光激发下,Er~(3+)单掺和Er~(3+)/Yb~(3+)共掺杂样品均呈现出较强的绿光(528,549 nm)和较弱的红光(655 nm)发射,分别归因于Er~(3+)离子的~2H_(11/2),~4S_(3/2)→~4I_(15/2)和~4F_(9/2)→~4I_(15/2)能级跃迁。随着Er离子浓度的增加,单掺杂样品上转换发光强度先增大后减小,最佳掺杂浓度为0.8%。共掺杂Yb~(3+)后,Er~(3+)的发光强度明显增大。还原气氛下合成的样品上转换发光强度增大约两倍,可能和笼中阴离子基团变化有关。发光强度和激发光功率的关系表明所得上转换发射为双光子吸收过程,借助Er~(3+)-Yb~(3+)体系能级结构详细讨论了上转换发射的跃迁机制。     

Synthesis,properties and mechanism of photodegradation of core–shell structured upconversion luminescent NaYF4:Yb3+,Er3+@BiOCl

Microspherical bismuth oxychloride (BiOCl) can only utilize ultraviolet (UV) light to promote photocatalytic reactions. To overcome this limitation, a uniform and thin BiOCl nanosheet was synthesized with a particle size of about 200 nm. As results of UV–visible diffuse reflectance spectroscopy showed, the band gap of this nanostructure was reduced to 2.78 eV, indicating that the BiOCl nanosheet could absorb and utilize visible light. Furthermore, the upconversion material NaYF₄ doped with rare earth ions Yb³⁺ and Er³⁺ emitted visible light at 410 nm following excitation with near‐infrared (NIR) light (980 nm), which could be utilized by BiOCl to produce a photocatalytic reaction. To produce a high‐efficiency photocatalyst (NaYF₄:Yb³⁺,Er³⁺@BiOCl), BiOCl‐loaded NaYF₄:Yb³⁺,Er³⁺ was successfully synthesized via a simple two‐step hydrothermal method. The as‐synthesized material was confirmed using X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy as well as other characterizations. The removal ratio of methylene blue by NaYF₄:Yb³⁺,Er³⁺@BiOCl was much higher than that of BiOCl alone. Recycling experiments verified the stability of NaYF₄:Yb³⁺,Er³⁺@BiOCl, which demonstrated excellent adsorption, strong visible‐light absorption and high electron–hole separation efficiency. Such properties are expected to be useful in practical applications, and a further understanding of the NIR‐light‐responsive photocatalytic mechanism of this new catalytic material would be conducive to improving its structural design and function.     

可见近红外光响应直接Z型异质结光催化剂LaNiO3/CdS的产氢性能

通过冷凝-回流方式制备可见近红外光响应直接 Z型 LaNiO₃/CdS纳米杂化物，在对其进行物理化学表征后将其应用于光解水产氢反应。在可见光照射下，LaNiO₃/CdS光催化剂在5 h的H₂产量达到737 μmol，其H₂产量是CdS的4.3倍(172 μmol)。光电化学测试证实，LaNiO₃/CdS之间异质结的构筑能有效地促进光生载流子在界面的迁移、分离，从而促进其光解水产氢效率和稳定性的提高。同时随着近红外光的引入，其产氢活性提高至996 μmol。在上转换荧光测试中，LaNiO₃在808 nm光激发下在406和628 nm显示出发射荧光，这表明其能在近红外光照射下产生光生载流子，从而进一步提高其光解水产氢效率。     

Evidence for resonant structures in e＋e-→π＋π-hc

Abstract： The cross sections of e＋e-→π＋π-hc at center-of-mass energies from 3.90 to 4.42 GeV were measured by the BESIII and the CLEO-c experiments. Resonant structures are evident in the e＋e-→π＋π-hc line shape. The fit to the line shape results in a narrow structure at a mass of （4216±18） MeV/c2 and a width of （39±2） MeV, and a possible wide structure of mass （4293±9） MeV/c2 and width （222=k67） MeV. Here, the errors are combined statistical and systematic errors. This may indicate that the Y（4260） state observed in e＋e-→π＋π-J/ψ has a fine structure in it.     

试验优化设计Er3+-Yb3+共掺杂Gd2Ti2O7上转换发光特性

采用溶胶-凝胶（Sol-gel）法制备了Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇纳米晶粉末,通过试验优化设计的理论建立了Er³⁺-Yb³⁺掺杂浓度与发光强度的回归方程,利用遗传算法优化计算出方程的最优解Er³⁺、Yb³⁺掺杂浓度分别为5.60%（物质的量分数）和13.43%。Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇纳米晶粉末为单一面心立方Gd₂Ti₂O₇相结构,随Yb³⁺共掺杂浓度增加,X射线衍射峰逐渐向高角偏移。在976 nm激光激发下,Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇获得了分别对应于Er³⁺的²H_11/2/⁴S_3/2→⁴I_15/2和⁴F_9/2→⁴I_15/2跃迁的绿色和红色上转换发光,且绿色和红色发光均为双光子吸收过程。研究了最优样品上转换发光与温度之间的关系,发现绿色上转换发光具有优良的温度传感特性,对红色上转换发光的温度猝灭进行了解释。     

超细YF3与GdF3纳米晶的合成及其上转换发光

当使用液固溶法（LSS法）制备分散性纳米晶时,将传统油酸/油酸钠/酒精反应体系中的NaOH用氨水取代时,氨水将会与油酸形成新的表面活性剂油酸铵,这样就可以合成各种超细分散性的REF₃纳米晶（RE代表稀土元素）。在这种新的反应体系中,合成了平均直径小于10nm的YF₃和GdF₃超细颗粒,X射线与透射电镜测试表明YF₃是正交相,而GdF₃是面心立方结构,空间群为Fm3m,晶格常数为0.5829nm。在980nm半导体激光器激发下,可检测到YF₃：Yb/Er在515~570nm处有较强的绿色发光峰、645~675nm处有较强的红色发光峰,呈橙色发光。YF：Yb/Tm和GdF₃：Yb/Tm样品在460~490nm处有较强的蓝色发光峰,而在800nm附近有更强的近红外发光峰。由于其超细的尺寸及红外上转换发光特性,合成的样品在生物成像,生物标签等方面有潜在的应用价值。     

Nitrogen‐Doped Carbon Dots: A Facile and General Preparation Method,Photoluminescence Investigation,and Imaging Applications

Carbon dots (Cdots) are an important probe for imaging and sensing applications because of their fluorescence property, good biocompatibility, and low toxicity. However, complex procedures and strong acid treatment are often required and Cdots suffer from low photoluminescence (PL) emission. Herein, a facile and general strategy using carbonization of precursors and then extraction with solvents is proposed for the preparation of nitrogen‐doped Cdots (N‐Cdots) with 3‐(3,4‐dihydroxyphenyl)‐L ‐alanine (L ‐DOPA), L ‐histidine, and L ‐arginine as precursor models. After they are heated, the precursors become carbonized. Nitrogen‐doped Cdots are subsequently extracted into N,N′‐dimethylformamide (DMF) from the carbogenic solid. A core–shell structure of Cdots with a carbon core and the oxygen‐containing shell was observed. Nitrogen has different forms in N‐Cdots and oxidized N‐Cdots. The doped nitrogen and low oxidation level in N‐Cdots improve their emission significantly. The N‐Cdots show an emission with a nitrogen‐content‐dependent intensity and Cdot‐size‐dependent emission‐peak wavelength. Imaging of HeLa cells, a human cervical cancer cell line, and HepG2 cells, a human hepatocellular liver carcinoma line, was observed with high resolution using N‐Cdots as a probe and validates their use in imaging applications and their multicolor property in the living cell system.     

Li+掺杂对Y2SiO5:Pr3+上转换发光性能影响

采用溶胶-凝胶法制备Li+掺杂改性的Y2SiO5:Pr3+上转换发光材料,考察了Li+掺杂对样品晶型及发光性能的影响。采用XRD,DSC-TGA,FS对所制备的材料进行表征,结果表明Li+掺入浓度在7%～8%(摩尔分数)之间会引起Y2SiO5晶体类型由X1型转变为X2型,且Li+掺入后样品转晶型温度由950℃降至800℃;样品经800℃煅烧处理后以X1型Y2SiO5为主相,850℃煅烧处理后以X2型Y2SiO5为主相;Li+掺入同时会提高Y2SiO5:Pr3+材料的上转换发光强度,Li+最佳掺杂浓度为10%,对于双掺杂Pr3+,Li+:Y2SiO5体系中Pr3+最佳掺杂浓度为1.2%。