块状LaNi5基纳米合金的正电子湮灭研究

利用高温高压技术，在不同的压力和温度(-4．5GPa，-800℃)下将LaNi5基快淬合金粉直接压制成了块状纳米晶合金。X射线衍射分析表明，高压使其晶粒内部发生了明显的压致晶粒碎化，其平均晶粒尺寸在4．5GPa下从75．5nm降至24．6nm。利用正电子湮灭技术研究了这种晶粒碎化效应对纳米合金内部缺陷结构的影响。测试结果表明，在高温高压的作用下，由于界面上原子的迁移和弛豫加剧，导致晶界上尺寸较大的微孔隙缺陷逐渐转化为尺寸较小的自由体积缺陷，使得纳米合金的致密度逐渐增强，显微硬度逐渐升高，从而在高温高压下得到致密的块状纳米合金材料。     

Positron annihilation studies of poly(N‐isopropyl acrylamide) gel in mixed solvents

Positron annihilation lifetime spectroscopy was used to characterize the reentrant volume‐phase‐transition behavior of poly(N‐isopropyl acrylamide) hydrogel in an ethanol/water mixed solvent. The polymer gel was synthesized with γ irradiation. The ortho‐positronium lifetime (τ₃) in the gel slowly increased with an increase in the ethanol content in the mixed solvent. τ₃ was not influenced by the volume phase transition. The ortho‐positronium intensity decreased with the collapse of the gel in an approximately 10% ethanol/water mixture. When swelled in pure ethanol, τ₃ initially increased with the solvent amount in the gel, showing the destruction of intramolecular hydrogen bonding and the relaxation of polymer chains. The lower critical solution temperature of the gel in the 10% ethanol/water mixture was lower than that in pure water, and τ₃ for various solvent contents showed behavior similar to that seen in pure solvent. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1028–1036, 2002     

侧链型丙烯酸酯共聚物相变的正电子湮没谱研究

利用正电子湮没技术对侧链型热致高分子液晶丙烯酸酯共聚物进行了变温相变研究．除实验标识出样品的相变温度点外，根据试样中自由体积随温度的变化关系，对高分子液晶材料内部立链、侧链以及介晶基元的相变行为特点进行了探讨，并就与小分子液晶变化特点的一些不同做了解释．     

Influence of Al2O3 Nanoparticles on the Thermal Stability of Ultra-Fine Grained Copper Prepared by High Pressure Torsion

Summary.  Ultra-fine grained (UFG) Cu (grain size 80 nm) containing 0.5 wt.% Al₂O₃ nanoparticles (size 20 nm) was prepared by high pressure torsion (HPT). Positron lifetime spectroscopy was employed to characterize the microstructure of this material, especially with respect to types and concentration of lattice defects. The evolution of microstructure with increasing temperature was studied by positron lifetime spectroscopy and X-ray diffraction measurements. The thermal stability of the Cu + 0.5 wt.% Al₂O₃ nanocomposite was compared with that of pure UFG Cu prepared by the same technique. The processes taking place during thermal recovery of the initial nanoscale structure in both studied materials are described. Received October 5, 2001. Accepted (revised) December 20, 2001     

CaS：Ce，Sm的制备及性能表征

采用碳还原法制备了CaS：Ce，Sm样品，并研究了反应机理、还原原理以及灼烧温度对CaS晶格形成和光激励发光的影响。样品的XRD测试表明，采用碳还原法制备的CaS：Ce，Sm样品，具有纯CaS的面心立方结构，晶格常数a=0.569 4 nm，样品的激发光谱是峰值分别位于295 nm和461 nm的宽带谱，样品的荧光光谱是峰值位于503 nm、560 nm、600 nm和655 nm带谱，光激励发光光谱是峰值分别位于500 nm，565 nm和605 nm的宽带谱，光激励激发光谱是峰值位于1 150 nm的宽带谱。     

Effect of an electric field on defects in a nematic liquid crystal with variable surface anchoring

We report experimental studies on defects in a nematic liquid crystal with negative dielectric anisotropy mounted in a cell with perfluoropolymer-coated surfaces. The sample exhibits a discontinuous anchoring transition from planar to homeotropic on cooling at zero or a small electric field, and above a cross-over voltage a continuous ‘inverse Freedericksz transition’, at which the director starts tilting in opposite directions at the two surfaces. Defects of strength ±1/2 are either annihilated or expelled when the director tilts. On the other hand, disclination lines of ±1 which end in partial point defects (boojums) at the surfaces in the planar alignment regime acquire point defects of strength ±1 at the midplane of the cell when the director tilts. At a low enough temperature, the homeotropic anchoring becomes strong, and an electric field above the Freedericksz threshold generates the usual umbilic defects, which follow the dynamic scaling laws found in earlier studies.     

Vacancy-like defects in nanocrystalline SnO2: influence of the annealing treatment under different atmospheres

The study of electronic and chemical properties of semiconductor oxides is motivated by their several applications. In particular, tin oxide is widely used as a solid state gas sensor material. In this regard, the defect structure has been proposed to be crucial in determining the resulting film conductivity and then its sensitivity. Here, the characteristics of vacancy-like defects in nanocrystalline commercial high-purity tin oxide powders and the influence of the annealing treatment under different atmospheres are presented. Specifically, SnO₂ nanopowders were annealed at 330 °C under three different types of atmospheres: inert (vacuum), oxidative (oxygen) and reductive (hydrogen). The obtained experimental results are discussed in terms of the vacancy-like defects detected, shedding light to the basic conduction mechanisms, which are responsible for gas detection.     

Dislocation driven chromium precipitation in Fe-9Cr binary alloy: a positron lifetime study

The influence of initial heat treatment on anomalous Cr precipitation within high temperature solubility region of the Fe–9Cr alloy has been investigated using positron lifetime studies. Air-quenched samples with pre-existing dislocations exhibited a distinct annealing stage in positron lifetime between 800 and 1100?K corresponding to Cr-precipitation. During this stage, Transmission Electron Microscopy showed fine precipitates of average size 4 nm, dispersed throughout the sample and from Energy-dispersive X-ray spectroscopy (EDS) analysis they are found to be Cr-enriched. The presence of dislocations is found to be responsible for Cr precipitation.     

Exploring the Phase-Selective,Green, Hydrothermal Synthesis of Upconverting Doped Sodium Yttrium Fluoride: Effects of Temperature,Time, and Precursors

The aim of this work was i) to develop a hydrothermal, low-temperature synthesis protocol affording the upconverting hexagonal phase NaYF₄ with suitable dopants while adhering to the “green chemistry” standards and ii) to explore the effect that different parameters have on the products. In optimizing the synthesis protocol, short reaction times and low temperatures (below 150 °C) were considered. Yb³⁺ and Er³⁺ ions were chosen as dopants for the NaYF₄ material. Within the context of the second goal, parameters including nature of the precursors, treatment temperature, and treatment time were investigated to afford a pure hexagonal crystalline phase, both in the doped and undoped materials. To fully explore the synthesis results, the prepared materials were characterized from a structural (XRD), compositional (XPS, ICP-MS), and morphological (SEM) point of view. The upconverting properties of the compounds were confirmed by photoluminescence measurements.