木质素催化转化制取苯、甲苯和二甲苯

对HZSM-5、HY和MCM-22三种催化剂进行了比较, 其中HZSM-5催化裂解木质素制备苯、甲苯和二甲苯(BTX)的结果最优．确定了木质素催化裂解的最佳反应条件,包括反应温度、载气流速、催化剂/木质素配比．当反应温度为550～600 oC,载气流速为300 mL/min,催化剂/木质素配比为2时,使用HZSM-5催化裂解制备BTX的最高C产率和芳香选择性分别可达25.3%和90.9%。     

Volumetric behaviour of binary and ternary liquid systems composed of ethanol, isooctane, and toluene at temperatures from (298.15 to 328.15) K. Experimental data and correlation

The densities and speeds of sound of (ethanol + isooctane), (ethanol + toluene), and (ethanol + isooctane + toluene) were measured at four temperatures over the range (298.15 to 328.15) K, and the respective values of excess volumes and adiabatic compressibility κ_S were calculated. The and κ_S values for the binary systems were fitted to the Redlich–Kister equation. The respective ternary data together with corresponding binary data were then fitted to the modified Redlich–Kister equation considering various numbers of ternary constants. It was found that even for the systems containing self-associating alcohol, only one ternary parameter is sufficient to describe well the ternary system.     

可见光响应碳掺杂的光催化剂涂覆于塞流反应器上分解气态芳香化合物(英文)

A plug‐flow reactor coated with carbon‐doped TiO2 (C‐TiO2 ) powder was investigated for the control of vaporous aromatics (benzene, toluene, ethylbenzene, and o‐xylene (BTEX)) under a range of experimental conditions. The characteristics of the as‐prepared C‐TiO2 and a reference Degussa P25 TiO2 powder were examined using X‐ray diffraction, scanning electron microscopy, diffuse‐reflectance ultraviolet‐visible‐near infrared spectroscopy, and Fourier transform infrared spectroscopy. The experimental conditions for the photocatalytic performance of the as‐prepared C‐TiO2 photocatalyst were controlled using three operational parameters, relative humidity, flow rate, and input concentration. Unlike other target compounds, very little benzene was removed by the C‐TiO2 photocatalyst under visible‐light irradiation. In contrast, the C‐TiO2 exhibited higher removal efficiencies for the other three target compounds (toluene, ethylbenzene, and xylene) compared with those achieved using unmodified TiO2 under visible‐light irradiation. The highest removal efficiency was obtained at a relative humidity value of 45%. Specifically, the toluene removal efficiency determined at a relative humidity of 45% was 78%, whereas it was close to 0%, 7.2%, and 5.5% for relative humidity values of 20%, 70%, and 95%, respectively. In addition, the removal efficiencies for the three target compounds decreased as the flow rate or input concentration increased. These findings indicate that the as‐prepared C‐TiO2 photocatalyst could be used for the removal of toxic vaporous aromatics under optimized operating conditions.     

Au/γ-MnO2催化剂催化无溶剂条件下甲苯氧化反应

采用氧化还原法制备了α, δ, γ-MnO₂载体, 采用原位还原法制备了Au负载量为0.5%-3.0%的Au/γ-MnO₂催化剂, 并采用X射线衍射、扫描电镜、透射电镜和N₂物理吸附等手段对其进行了表征. 透射电镜照片表明Au/γ-MnO₂催化剂中Au颗粒的大小约为10 nm. 采用无溶剂存在下的甲苯氧化反应测试所制备样品的催化活性. 结果表明, 甲苯转化率随着Au负载量的增加而增大. 这是由于Au颗粒数量增多, 尺寸减小的缘故. 同时, 负载Au颗粒对苯甲醛具有较高的选择性. Au/γ-MnO₂催化剂具有良好的重复使用性.     

A clever strategy for permeability studies of methyl bromide and some organic compounds through high-barrier plastic films

An analytical strategy has been proposed and optimized to study the permeability of several flexible plastic materials, some of them with high-barrier properties, versus naphthalene, methyl bromide, toluene, ethylbenzene, and ortho- and para-xylenes. The strategy involves using a system of concentric plastic bags made from the materials to be tested polyethylene (PE) and used as permeable plastics to facilitate the homogeneous distribution of a solid compound, such as naphthalene, in vapour phase. After the permeation test, the vapour phase containing the pollutants that cross the plastic barrier is trapped in a 12% ethanol–water solution and further analysed by SPME in headspace mode. Several experimental conditions as well as different samples were tested. The results obtained are shown and discussed.     

FT-IR study of the photocatalytic degradation of gaseous toluene over UV-irradiated TiO2 microballs: enhanced performance by hydrothermal treatment in alkaline solution

In this study, photocatalysts of TiO₂ microballls were obtained via a hydrothermal treating of commercial P25 in alkaline solution, and then characterized with SEM, XRD, BET, DRS and surface photovoltage spectroscopy (SPS) techniques. The photovoltage response of the prepared TiO₂ microballs on spectrum features a quantum size effect brought about by the reduced grain size with respect to the precursor. The UV-assisted photodegradation of gaseous toluene over P25 and the prepared TiO₂ microballs was monitored by an in situ infrared technique. The results demonstrated that the prepared TiO₂ microballs in anatase form were more active than commercial P25 in photocatalytic oxidation of gaseous toluene. The promoted activity of the hydrothermal-treated TiO₂ is attributed to the increasing specific surface area and larger band gap induced by the reduced crystallite size.     

Vapor-phase testing of the memory-effects in benzene- and toluene-imprinted polymers conditioned at elevated temperature

The preparation of polymers imprinted with common aromatic solvents such as benzene and toluene is an under-exploited subject of research. The present study was aimed at the understanding of whether true solvent memory effects can be achieved by molecular imprinting, as well as if they are stable at elevated temperature. A set of copolymers, comprising low and high cross-linking levels, was prepared from four different combinations of functional monomer and cross-linker, namely methacrylic acid (MAA)/ethylene glycol dimethacrylate (EGDMA), methyl methacrylate (MMA)/EGDMA, MAA/divinyl benzene (DVB) and MMA/DVB. Each possible combination was prepared separately in benzene, toluene and acetonitrile. The obtained materials were applied as coatings onto nickel–titanium (Ni–Ti) alloy wires which were incorporated into solid-phase microextraction devices and finally tested for their ability to competitively adsorb vapors from the headspace of an aqueous solution containing a few volatile organic compounds.     

Toluene combustion over Pd-based monolithic catalysts with a novel Ce x Zr 1?X O2 washcoat

A novel Ce _x Zr _1−x O₂ washcoat was prepared by impregnation, which acts as a host for the active Pd component to prepare a series of Pd-based monolithic catalysts for toluene combustion. The redox behavior and catalytic activity depend on the molar ratio of Ce to Zr.     

Toluene abatement on Ag-CeO2/SBA-15 catalysts: synergistic effect of silver and ceria

As a typical volatile organic compound, toluene is a hazardous material for human health and the environment, and currently, the development of catalysts for its oxidation into CO₂ and water is crucial. The series of Ag-CeO₂/SBA-15 catalysts is synthesized by wetness impregnation techniques and characterized by a number of physical-chemical methods (nitrogen [N₂] physisorption, small angle X-ray scattering [SAXS], transmission electron microscopy [TEM], and temperature-programmed reduction [TPR]). The toluene sorption and catalytic properties in toluene oxidation are studied. Small silver [Ag] and cerium oxide [ceria, CeO_2] particles with sizes below 3 nm are predominantly formed in the ordered structure of Santa Barbara Amorphous-15 [SBA-15]. The interactions between the Ag and CeO₂ nanoparticles are established. Temperature-programmed desorption of toluene [TPD-C₇H₈] analysis shows that physical adsorption of toluene occurs on pristine SBA-15 material, while the introduction of either silver or ceria to SBA-15 leads to the appearance of additional strongly bound chemisorbed toluene on such sites. When both Ag and CeO₂ are introduced, only chemisorbed toluene is formed over the Ag-CeO₂/SBA-15 catalyst, and the highest catalytic activity in toluene oxidation is observed over this catalyst (T_98% = 233 °C, 0.2% C₆H₅CH₃) that is attributed to the synergistic effect of ceria [CeO_2] and silver [Ag].     

A theoretical study on the destruction of typical biomass tar components (toluene,phenol and naphthalene) by OH radical

The detailed reaction mechanism of OH radical destroying toluene, phenol and naphthalene was studied through quantum chemical calculations in the research. Theoretical results indicate that for phenol and toluene, OH radical preferentially attack the ortho C atom due to the functional group on the benzene ring. But for naphthalene, OH radical preferentially attack the para-position C atoms because of its inherent benzo structure. To further study of the kinetics, the rate constant was calculated by the transition state theory. The comparison shows that the theoretical reaction rate constants for the degradation of tar by the OH radical were consistent with those obtained from literature experiments. And the rate constant of destructing naphthalene by OH radical was larger than that of destructing toluene, but lower than that of destructing phenol. The degradation sequence of OH radical to tar is: phenol ​> ​naphthalene ​> ​toluene. Because of the activation of hydroxyl group in benzene ring, phenol is the most easily attacked and destroyed by OH radical. The theoretical results can provide theoretical basis and data reference for further research on the removal of biomass tar and aromatics by OH radical.