Ethylene and propylene polymerization behavior of a series of bis(phenoxy–imine)titanium complexes

This contribution reports ethylene and propylene polymerization behavior of a series of Ti complexes bearing a pair of phenoxy–imine chelate ligands. The bis(phenoxy–imine)Ti complexes in conjunction with methylalumoxane (MAO) can be active catalysts for the polymerization of ethylene. Unexpectedly, this C₂ symmetric catalyst produces syndiotactic polypropylene. ¹³C NMR spectroscopy has revealed that the syndiotacticity arises from a chain-end control mechanism. Substitutions on the phenoxy–imine ligands have substantial effects on both ethylene and propylene polymerization behavior of the complexes. In particular, the steric bulk of the substituent ortho to the phenoxy–oxygen is fundamental to obtaining high activity and high molecular weight for ethylene polymerization and high syndioselectivity for the chain-end controlled propylene polymerization. The highest ethylene polymerization activity, 3240 kg/mol-cat h, exhibited by a complex having a t-butyl group ortho to the phenoxy–oxygen, represents one of the highest reported to date for Ti-based non-metallocene catalysts. Additionally, the polypropylene produced exhibits a T_m, 140 °C, and syndioselectivity, rrrr 83.7% (achieved by a complex bearing a trimethylsilyl group ortho to the phenoxy–oxygen) that are among the highest for polypropylenes produced via a chain-end control mechanism. Hence, the bis(phenoxy–imine)Ti complexes are rare examples of non-metallocene catalysts that are useful for the polymerization of not only ethylene but also propylene.     

Preparation of a highly active nanocrystalline TiO2 photocatalyst from titanium oxo cluster precursor

Nanocrystalline TiO₂ (sample S1) was prepared from a titanium oxo cluster (Ti₇O₄(OEt)₂₀) precursor via a sol-gel route. This photocatalyst showed a higher photocatalytic activity than the TiO₂ (sample S2) obtained from titanium tetraisopropoxide. The samples were characterized by thermal analysis (TGA/DSC), X-ray diffraction, micro-Raman spectroscopy, transmission electron microscopy, N₂ adsorption (BET surface area), infrared absorption spectroscopy (FT-IR) and X-ray photoelectron spectroscopy. The characterization results show that both samples are anatase nanocrystals with particle sizes of about 12 nm, but the more photocatalytically active sample S1 has more surface hydroxyl groups and larger surface area and pore volume than sample S2.     

Titanium as a chemical modifier for the determination of cobalt in marine sediments

The determination of cobalt in marine sediments by electrothermal atomic absorption spectrometry was studied using no modifier and magnesium and titanium as modifiers. Titanium is one of the major sediment constituents, which widely affects the cobalt determination and it was studied as a chemical modifier since it was the only concomitant that increased the cobalt signal in the concentration range usually found in sediments. The performance of Mg and Ti as chemical modifiers was compared relative to maximum pyrolysis and atomization temperatures, linear calibration range, sensitivity and matrix effects. The pyrolysis curves showed that the analyte could be stabilized up to 1400 °C when either Ti or Mg(NO₃)₂ was present, while only 1000 °C could be used in the absence of a modifier. The optimum atomization temperature was 2500 °C in all cases. Analytical curves were compared using no modifier, 5 μg Ti and 100 μg Mg(NO₃)₂ as modifiers, and the linear range found was up to approximately 4 ng Co whether a modifier was used or not. With Ti as a chemical modifier, analytical curves for cobalt in aqueous solution and in a synthetic matrix resulted in the same sensitivity (m₀=55 pg), whereas the use of Mg led to characteristic mass values of 59 and 72 pg in aqueous solution and in a synthetic matrix, respectively, showing some matrix effect. The detection limits (3σ, n=10) were 0.4 μg g⁻¹ using no modifier and 0.3 μg g⁻¹ with Ti as a modifier in the original matrix. A reference estuarine sediment NIST 1646 with a non-certified content of 10.5 μg g⁻¹ Co was analyzed and the found value of 10.9±2.4 μg g⁻¹, (n=3), using Ti as chemical modifier and calibration against aqueous standards, was in good agreement with the recommended value.     

A novel Fe（OH）3/TiO2 nanoparticles and its high photocatalytic activity

A very simple and controllable approach was proposed to synthesize novel Fe(OH)_3/TiO_2 nanoparticles.Compared with neat TiO2,the Fe(OH)_3/TiO_2 increased the rate of the photocatalytic degradation of methyl orange at pH 6.0 by more than five times, showing photocatalytic activity as excellent as P25.This enhancing effect is mainly attributed to the ferric hydroxide deposits as the electron scavenger and the enriched surface hydroxyl groups.     

Komplexe von Vanadium und Titan mit Salicylaldehyd-benzoylhydrazon und 2-(2′-Hydroxyphenyl)-chinolin-8-ol. Kristallstruktur von μ-Oxo-bis[oxo{2-(2′-Hydroxyphenyl)-chinolin-8-olato(2-)}-vanadium(V)]

Complexes of Vanadium and Titanium with Salicylaldehyde benzoylhydrazone and 2-(2′-Hydroxyphenyl)-8-quinolinol. Crystal Structure of μ-Oxo-bis[oxo{2-(2′-hydroxyphenyl)-8-quinolinato(2-)}-vanadium(V)] . By reaction of titanium(IV)-isopropoxide and bis(acetylacetonato)-oxovanadium(IV) with salicylaldehyde benzoylhydrazone and 2-(2′hydroxyphenyl)-8-quinolinol, respectively, the metal complexes of the tridentate diacidic ligands were synthesized and characterized mass spectrometrically. The mass spectra of the titanium compounds correspond to the expected bisligand complexes whereas several species are demonstrable in the case of vanadium. Crystals of μ-oxo-bis[oxo{2-(2′-hydroxyphenyl)-8-quinolinolato(2-)}-vanadium(V)] were isolated and characterized by X-ray structural analysis. The complex exhibits C₂ symmetry, accordingly the μ₂-oxygen atom is situated on the 4 axis. The VOV bridge is angular with the unusually small bond angle of 107.3°. The coordination polyhedron is distorted octahedral. The compound additionally contains one molecule of chloroform per formula unit which is disordered in two positions. Crystallographic data see “Inhaltsübersicht”.     

Origin of visible-light-driven photocatalysis: A comparative study on N/F-doped and N-F-codoped TiO2 powders by means of experimental characterizations and theoretical calculations

An overall comparative study was carried out on N-doped, F-doped, and N-F-codoped TiO₂ powders (NTO, FTO, NFTO) synthesized by spray pyrolysis in order to elucidate the origin of their visible-light-driven photocatalysis. The comparisons in their experimentally obtained characteristics were based on the analysis of XPS, UV-Vis, PL, NH₃-TPD and ESR spectra. The comparisons in their theoretically predicted properties were based on the analysis of the calculated electronic structures. As the results, N-doping into TiO₂ resulted in not only the improvement in visible-light absorption but also the creation of surface oxygen vacancies. F-doping produced several beneficial effects including the creation of surface oxygen vacancies, the enhancement of surface acidity and the increase of Ti³⁺ ions. Doped N atoms formed a localized energy state above the valence band of TiO₂, whereas doped F atoms themselves had no influence on the band structure. The photocatalytic tests indicated that the NFTO demonstrated the highest visible-light activity for decompositions of both acetaldehyde and trichloroethylene. This high activity was ascribed to a synergetic consequence of several beneficial effects induced by the N-F-codoping.     

Ag改性提高TiO2对Cr(VI)的光催化还原活性机理

在消除了质子缺乏、光生电子-空穴复合对Cr6＋光催化还原负效应影响下，比较了TiO2和Ag/TiO2（Ag质量分数 1.0％）光催化还原活性.结果表明，相同条件下Ag/TiO2表现出比TiO2更高的催化活性. EPR分析表明，对于Ag/TiO2，UV照射后Ag表面有活性物种生成，在TiO2上有活性中心表相Ti3＋生成.光生电子通过表相Ti3＋向Cr6＋传递电子是Cr6＋光催化还原的速度控制步骤.较多的表相Ti3＋参与还原反应是Ag/TiO2表现出较高催化活性的主要原因，担载Ag上积聚光生电子的较强流动性对反应也起到一定促进作用.     

Fluorine-doped TiO2 powders prepared by spray pyrolysis and their improved photocatalytic activity for decomposition of gas-phase acetaldehyde

F-doped TiO₂ (FTO) powders were synthesized by spray pyrolysis (SP) from an aqueous solution of H₂TiF₆. The resulting FTO powders possessed spherical particles with a rough surface morphology and a strong surface acidity. The fluorine concentrations in the FTO powders calculated from XPS spectra significantly depended on SP temperature and ranged from 2.76 to 9.40 at.%. The FTO powder prepared at SP temperature of 1173 K demonstrated the highest photocatalytic activity for the decomposition of gas-phase acetaldehyde under both ultraviolet (UV) and visible light (vis) irradiations, and it was higher than that of commercial P 25. This high photocatalytic activity was ascribed to several beneficial effects produced by F-doping: enhancement of surface acidity, creation of oxygen vacancies, and increase of active sites. It was interesting to point out that the vis photocatalytic activity of FTO powders was achieved by the creation of surface oxygen vacancies rather than the improvement of optical absorption property of bulk TiO₂ in vis region.     

丙烯环氧化反应中失活钛硅分子筛的无氧脱附研究

采用无氧脱附方法对丙烯环氧化中失活的薄层钛硅分子筛(即Spent EPO-4)和环氧丙烷(PO)与丙二醇单甲醚(MME)浸渍的TS-1催化剂(即PO／TS-1和MME／TS-1)进行了研究，脱附产物由气相色谱定性分析，无氧脱附后的催化剂以丙烯环氧化为探针反应进行再生性能评价，同时在无氧条件下考察了TS-1在300℃时催化裂化PO反应．实验结果表明：PO浸渍TS-1可使其活性明显下降，PO在TS-1上不是简单的弱吸附，存在着化学强吸附和自聚．失活催化剂(Spent EPO-4和PO／TS-1)经无氧脱附后，其催化活性可显著恢复．通过对失活催化剂脱附产物的比较，推测了丙烯环氧化反应过程中钛硅分子筛失活原因．     

钛硅分子筛挤条成型催化剂热稳定性能的研究

采用在空气中程序升温焙烧的方式考察了钛硅分子筛挤条成型催化剂的热稳定性能．对不同温度焙烧得到的样品进行了XRD、IR、UV Raman和SEM表征．结果表明，在高温焙烧时，由于载体结构的改变引起载体与分子筛之问相互作用发生变化，导致成型催化剂中分子筛骨架破坏．随着焙烧温度的提高，IR谱图中960cm^-1处代表钛进入骨架的特征峰的强度迅速减弱，当焙烧温度达到1000℃时，960cm-1处的骨架钛特征峰移至948cm^-1．在紫外拉曼谱图中，骨架位钛物种的特征拉曼谱峰-1125cm^-1谱峰在加入SiO2载体后，高温下峰强度明显降低，这说明载体的加入降低了钛硅分子筛挤条成型催化剂的热稳定性能．