Probing the Effects of Reagent Gas Pressure and Ion Source Temperature for Dimethyl Ether Chemical Ionization of Tricyclic Antidepressants in an External Source Ion Trap Mass Spectrometer

This study examines the reagent gas pressure and ion source temperature dependence for dimethyl ether chemical ionization (DME CI) mass spectra recorded with an external source ion trap mass spectrometer (ITMS). Information for better controls of the reagent gas pressure in order to obtain fair CI spectra is provided. The origin of M^+? ions observed in DME CIMS is discussed in detail. Furthermore, the ion source temperature effect on the DME CI is also investigated.     

Modeling the cluster formation during infrared and ultraviolet matrix-assisted laser desorption ionization of oligonucleotides in succinic acid matrix with molecular mechanics

A large succinic acid (HOOC(CH₂)₂COOH) matrix containing 7 × 7 × 7 unit cells with guest oligonucleotide AGCAGCT was modeled with molecular dynamics simulation for infrared matrix-assisted laser desorption ionization. We simulated the laser heating of the succinic acid (this data is still missing from the literature) with λ=2.94 μm infrared laser pulses and compared it to ultraviolet excitation. We did this in order to elucidate the cluster formation of succinic acid in the gas phase in itself and around the analyte. At this wavelength, the laser energy is coupled into the matrix through the OH vibrations of the carboxyl groups. The most pronounced difference we observed at 1,500 K simulation is that infrared heating generates about 10–15 more succinic acid molecules bound to the analyte in noncovalent complex form than the ultraviolet mode, which generates about 2 molecules thus bound. We report energy redistribution within the matrix between the host and guest species as well as other dynamical properties. The parameter and topology data for succinic acid that we used are reported and ready for use in CHARMM computer code environment for simulation. Revised: 12 October 2001 / Accepted: 27 February 2002 / Published online: 13 June 2002     

Limited proteolysis combined with isotope labeling and quantitative LC-MALDI MS for monitoring protein conformational changes: a study on calcium-binding sites of cardiac Troponin C

Studies of protein-protein and protein-ligand interactions are important for understanding biological functions of proteins. A new technique based on the partial proteolysis of proteins combined with quantitative mass spectrometry is developed as a means of tracking structural changes after the formation of a protein-ligand complex. In this technique, a protein of interest with and without the binding of a ligand is digested with an enzyme to generate a set of peptides, followed by separation of the peptides by liquid chromatography. Matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS) is used to identify chromatographically separated peptides, and locate their sequence alignments in the parent protein. Using an isotopically labeled protein as a sample against an unlabeled protein standard, quantitative information can be gathered. This overcomes the inherent lack of quantitative capability of MALDI MS. The utility of the technique to investigate protein-ligand interactions is demonstrated in a model system involving calcium binding to cardiac Troponin C (cTnC). Using this technique, the general location of the three calcium-binding sites of cTnC can be determined by using several different enzymes to generate overlapping peptide maps of cTnC.     

Multidimensional separation of isomeric species of chlorinated hydrocarbons such as PCB,PCDD, and PCDF

A multidimensional GC-system containing two capillary columns of different polarities, operated within a double oven instrument, was used for the optimized separation of complex isomeric mixtures of various types of chlorinated aromatic compounds such as PCB, PCDD, or PCDF. Electron capture was applied parallel to flame ionization detection to obtain sensitive signals of the PCB or PCDD and the n-alkane standards required for identification by Kovats indices, respectively. Electron capture detection within a valvelessly operated MDGC system forced changes in the usual instrumental set-up, the live-switching coupling piece being located within the second oven of the double oven instrument. This oven is operated isothermally to ensure optimal and interference-free detection, for stable flow conditions within the coupling piece and for the determination of the isothermal retention indices (Kovats), which are much more suitable for identification by retention than the so-called “linear” indices.     

Correlation analysis of quantum chemical data and the polarizability effect in H-complexes

The study is concerned with analysis of the energies of formation (E), frequency shifts (Δν) in IR spectra, ionization potentials (IP) of H-complexes, hydrogen bond lengths (r), and spin densities (sd) in H-complexes involving radical cations, obtained from quantum chemical calculations for 20 series of H-complexes. It was for the first time established that the E, IP, r, and sd values and the changes in enthalpy (δH) depend not only on the inductive and resonance effects but also on the polarizability effect of the substituents bound to the donor and acceptor centers in the H-complexes. Interrelations between the polarizability effect and the molecular structure of H-complexes are considered. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 602–608, April, 2006.     

Partial molar volumes of amino acid derivatives in water

The partial molar volumes at infinite dilution for a number of hydrochlorides and sodium salts of N-methyl derivatives of , -aminocarboxylic acids in water at 25°C are measured and related to their van der Waals volumes. Results indicate that 4.96±0.48 water molecules hydrate a betaine hydrochloride. Volumes of proton ionization and interaction terms are evaluated. Group contributions to the partial molar volumes are also reported.     

Microscale sample deposition onto hydrophobic target plates for trace level detection of neuropeptides in brain tissue by MALDI-MS

A sample preparation method that combines a modified target plate with a nanoscale reversed-phase column (nanocolumn) was developed for detection of neuropeptides by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). A gold-coated MALDI plate was modified with an octadecanethiol (ODT) self-assembled monolayer to create a hydrophobic surface that could concentrate peptide samples into a approximately 200-500-microm diameter spot. The spot sizes generated were comparable to those obtained for a substrate patterned with 200-microm hydrophilic spots on a hydrophobic substrate. The sample spots on the ODT-coated plate were 100-fold smaller than those formed on an unmodified gold plate with a 1-microl sample and generated 10 to 50 times higher mass sensitivity for peptide standards by MALDI-TOF MS. When the sample was deposited on an ODT-modified plate from a nanocolumn, the detection limit for peptides was as low as 20 pM for 5-microl samples corresponding to 80 amol deposited. This technique was used to analyze extracts of microwave-fixed tissue from rat brain striatum. Ninety-eight putative peptides were detected including several that had masses matching neuropeptides expected in this brain region such as substance P, rimorphin, and neurotensin. Twenty-three peptides had masses that matched peaks detected by capillary liquid chromatography with electrospray ionization MS.     

Profiling and comprehensive expression analysis of ABC transporter solute-binding proteins of Bacillus subtilis membrane based on a proteomic approach

We analyzed ABC transporter solute-binding proteins (SBPs) of the Bacillus subtilis membrane using a proteomic approach. We prepared a washed cell membrane fraction that was insoluble in 134 mM nondetergent sulfobetaine and then extracted proteins using mixtures of detergents in a stepwise manner. The membrane proteins were resolved by three two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) or two one-dimensional (1-D) PAGE procedures, electroblotted, and digested in the presence of 5% or 80% acetonitrile. Thereafter, matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF MS) identified 637 proteins corresponding to 15.9% of the total cellular proteins. We predicted that among these, 256 were membrane proteins, 101 were lipoproteins or secretory proteins and 280 were soluble proteins containing peripheral proteins that function in both the cytoplasm and the cell membrane such as SecA and FtsY. Among the 637 proteins, we identified 30 SBPs among 38 importers predicted by a bioinformatic search of the genome. We confirmed expression of the genes for the 30 SBPs using DNA microarray analysis. We compared the 2-D gel separation profiles of submembrane fractions solubilized by 1% n-dodecyl-beta-D-maltoside from cells cultured on Luria Bertani (LB), S7, and S7 medium without glutamate as well as DNA microarray data on LB and S7. The results suggested that YcdH, YtmK and YurO are binding proteins for Mn(++), glutamate and glucose, respectively, and that YqiX and YxeM are binding proteins for amino acids (tryptophan in S7 medium).     

In-gel deglycosylation of sodiumdodecyl sulfate polyacrylamide gel electrophoresis-separated glycoproteins for carbohydrate estimation by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Mass determination by mass spectrometric methods (electrospray ionization mass spectrometry (ESI-MS), matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS)) of sodiumdodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE)-separated proteins is a well known procedure and reliable protocols are available. In our efforts to use the established methods to determine the molecular mass of the disulfide bridged, heterodimeric glycoprotein GP3 and to determine the carbohydrate content of each protein subunit we developed an in-gel chemical deglycosylation method. For this purpose we established experimental conditions that allow maximum extraction of the high molecular mass protein subunits and developed a routine method to apply the HF-pyridine deglycosylation protocol to proteins isolated from polyacrylamide gel pieces. The novel protocol and extraction procedure described can be used to analyze O-glycosylated proteins up to 150 kDa after SDS-PAGE separation.     

The electronic structure of molecules by a many-body approach

The vertical valence ionization potentials of cyclopropane, ethylene oxide and ethylene imine are calculated by a many-body Green's function method. For C₃H₆ the ordering of the ionization potentials is 2e(), 1e(), 2a₁(), 1a₂(), 1e(). The assignment of the 2a₁ and the 1a₂ ionization potentials which has been controversial is thus clarified. The ordering is in agreement with the result obtained via Koopmans' theorem. For ethylene oxide and ethylene imine Koopmans' theorem fails in predicting the correct order of ionic states. For C₂H₄O the ordering of the ionization potentials is 2b ₁(), 4a ₁, 1a ₂(), 2b ₂,3a ₁, 1b ₁(), 1b ₂, 2a ₁ and for C₂H₅N 6a, 5a, 3a, 2a, 4a, 3a, 1a, 2a. The agreement of the computed ionization potentials with the experimental values is very satisfactory.