Formation and hydrogenation of p(2 × 2)-N on Pt(1 1 1)

The formation of a well-ordered p(2 × 2) overlayer of atomic nitrogen on the Pt(1 1 1) surface and its reaction with hydrogen were characterized with reflection absorption infrared spectroscopy (RAIRS), temperature programmed desorption (TPD), low energy electron diffraction (LEED), Auger electron spectroscopy (AES), and X-ray photoelectron spectroscopy (XPS). The p(2 × 2)-N overlayer is formed by exposure of ammonia to a surface at 85 K that is covered with 0.44 monolayer (ML) of molecular oxygen and then heating to 400 K. The reaction between ammonia and oxygen produces water, which desorbs below 400 K. The only desorption product observed above 400 K is molecular nitrogen, which has a peak desorption temperature of 453 K. The absence of oxygen after the 400 K anneal is confirmed with AES. Although atomic nitrogen can also be produced on the surface through the reaction of ammonia with an atomic, rather than molecular, oxygen overlayer at a saturation coverage of 0.25 ML, the yield of surface nitrogen is significantly less, as indicated by the N₂ TPD peak area. Atomic nitrogen readily reacts with hydrogen to produce the NH species, which is characterized with RAIRS by an intense and narrow (FWHM ∼ 4 cm⁻¹) peak at 3322 cm⁻¹. The areas of the H₂ TPD peak associated with NH dissociation and the XPS N 1s peak associated with the NH species indicate that not all of the surface N atoms can be converted to NH by the methods used here.     

第一类永动机幻梦的破灭

介绍了13~18世纪物理学史和科技史上曾名噪一时的第一类永动机的设计方案的破灭.第一类永动机幻梦破灭的历史引起了人们的反思与启示,有力地促进了19世纪中叶能量转化和守恒定律的确立.     

Interface-related effects on confined excitons in GaAs/AlxGa1−xAs single quantum wells

Confined excitons in non-abrupt GaAs/Al_xGa_1−xAs single quantum wells are studied. The graded interfaces are described taking into account fluctuations in their thickness a and positioning with respect to the abrupt interface picture. Numerical results for confined (0,0),(1,1) and (0,2) excitons in GaAs/Al_0.3Ga_0.7As quantum wells show that while the interfacial fluctuations produce small changes (<0.5 meV) in the exciton binding energies, the confined exciton energies can be red- or blue-shifted as much as 25 meV for wells with mean width of 50 Å and 2 ML wide interfaces.     

增湿活化反应器内喷水脱硫试验研究

本文介绍在热态脱硫试验台上进行的生石灰和消石灰的喷水活化脱硫试验,研究了Ca/S比、饱和温距、入口烟气SO2浓度、烟气速度及水喷嘴雾化风对脱硫效率和钙利用率的影响规律,对两种脱硫剂的脱硫活性进行了比较,并对喷水增湿提高脱硫效率的机理进行了分析。研究表明,喷水增湿使两种脱硫剂的活性都有明显提高,生石灰具有价格优势。     

光纤的能量传输特性及应用

着重分析了影响光纤传输能量以及光纤传输中造成能量损耗的因素。这些因素主要包括光纤材料、构造、光纤的折射率分布、光纤的长度和芯径、光纤的数值孔径和热效应以及耦合等。同时 ,结合激光二极管点火的实例 ,分析探讨了其背景和应用价值。结论是 :为了尽可能减少能量损耗、提高光纤输出的激光功率和激光功率密度 ,应当选取合适的激光工作波长、较小的光纤长度、较小的芯径和较小的数值孔径 ,应采用渐变折射率分布光纤 ,应减少弯曲与耦合     

High energy asymptotics of the scattering amplitude for the Schrödinger equation

We find an explicit function approximating at high energies the kernel of the scattering matrix with arbitrary accuracy. Moreover, the same function gives all diagonal singularities of the kernel of the scattering matrix in the angular variables. This paper is dedicated to Jean-Michel Combes on the occasion of his sixtieth birthday.     

不同入射角度下强流脉冲电子束能量沉积剖面和束流传输系数模拟计算

 强流脉冲电子束在材料中的能量沉积剖面、能量沉积系数和束流传输系数受其入射角的影响很大，理论计算了0.5~2.0MeV的电子束以不同的入射角在Al材料中的能量沉积剖面和能量沉积系数，并且还计算了0.4~1.4MeV电子束以不同入射角穿透不同厚度C靶的束流传输系数。计算结果表明，随着入射角的增大，靶材表面层单位质量中沉积的能量增大，电子在靶材料中穿透深度减小，能量沉积系数减小，相应的束流传输系数也减小；能量为0.5~2.0MeV的电子束当入射角在60°~70°时在材料表面层单位质量中沉积的能量较大。     

Exciton energy broadening due to interface fluctuations in ZnSe/ZnSxSe1−x strained quantum wells

The excitonic properties of a ZnSe/ZnS_xSe_1−x strained quantum well (QW) are calculated taking into account interface effects. Numerical results obtained with ZnS_0.18Se_0.82/ZnSe QWs show that graded interfaces can be responsible for a strong broadening of excitonic spectra.     

Biodegradable/biocompatible ABC triblock copolymer bearing hydroxyl groups in the middle block

New biodegradable/biocompatible ABC block copolymers, poly(ethylene oxide)‐b‐poly(glycidol)‐b‐poly(L ,L ‐lactide) (PEO‐PGly‐PLLA), were synthesized. First, PEO‐b‐poly(1‐ethoxyethylglycidol)‐b‐PLLA was synthesized by a successive anionic ring‐opening copolymerization of ethylene oxide, 1‐ethoxyethylglycidyl ether, and L ,L ‐lactide initiated with potassium 2‐methoxyethanolate. In the second step, the 1‐ethoxyethyl blocking groups of 1‐ethoxyethylglycidyl ether were removed at weakly acidic conditions leaving other blocks intact. The resulting copolymers were composed of hydrophilic and hydrophobic segments joined by short polyglycidol blocks with one hydroxyl group in each monomeric unit. These hydroxyl groups may be used for further copolymer transformations. The PEO‐PGly‐PLLA copolymers with a molecular weight of PLLA blocks below 5000 were water‐soluble. Above the critical micellar concentration (ranging from 0.05 to1.0 g/L, depending on the composition of copolymer), copolymers formed macromolecular micelles with a hydrophobic PLLA core and hydrophilic PEO shell. The diameters of the micelles were about 25 nm. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3750–3760, 2003     

Radiochemical proton activation analysis for the determination of cadmium and lead in sediment reference materials

Proton activation analysis was used for the determination of cadmium and lead in three sediment reference materials. The method is based on the^111,112Cd(p, xn)¹¹¹ In and the^206,207,208Pb(p, xn)²⁰⁶Bi reactions.¹¹¹In and²⁰⁶Bi were chemically separated by anion exchange. The results obtained were taken into account for the certification of the materials and are in the excellent agreement with the certified values.