OXIDATION OF TiAl,Ni AND Fe IN A DYNAMIC ENVIRONMENTAL SEM

IntroductionInmaterialscience,differentmicrostructuresofthesamematerialsmayinducediversebehaviorsanddifferentcharacteristics.Westwood(1988)showed,asanexample,thatthetreatmentofaluminumsurfacewithcommercialphosphoricacidproducedmechanicallyinterlockedoxide搘hiskers?approximately10nmindiameterand400nminlength,whichmechanicallyinterlocked.Thismicro-structurecankeepsuchaconglomeratebondedoverconsiderablerangesofstressandtemperature.Inahumidatmosphere,especiallythatcontainingchlorine,however,suchox…     

Synthesis of 3-hydroxyindolin-2-one alkaloids, (±)-donaxaridine and (±)-convolutamydines A and E, through enolization-Claisen rearrangement of 2-allyloxyindolin-3-ones

Claisen rearrangement triggered by enolization of 2-allyloxyindolin-3-ones with DBU was performed in order to prepare 3-allyl-3-hydroxyindolin-2-ones. Total synthesis of 3-hydroxyindolin-2-one alkaloids, (±)-donaxaridine, as well as (±)-convolutamydines A and E, was achieved by transformation of the allyl moiety of 3-allyl-3-hydroxyindolin-2-ones.     

Reactivity of a Ti–45.9Al–8Nb alloy in air at 700–900°C

A Ti–45.9Al–8Nb (at%) alloy with a lamellar structure (γ+α₂) was oxidised in air at 700, 800, 850 and 900°C in isothermal and thermal cycling conditions. The reaction progress was followed by thermogravimetric measurements. In isothermal conditions the oxidation kinetics followed approximately a parabolic rate law and the rate constants ranged from about 10^–12 kg² m^–4 s^–1 at 700°C to 10^–10 kg² m^–4 s^–1 at 900°C. The oxide scales were built of Al₂O₃ and TiO₂, the former being the main component of the outermost layer. The oxidation behaviour of Ti–45.9Al–8Nb was referred to a commercial titanium alloy, WT4 (Ti–6Al–1Mn), and selected oxidation-resistant alloys.     

Aharonov–Bohm oscillations observed in nanoscale open-dot structures fabricated in an InAs surface inversion layer

We fabricated nanoscale open-dot structures in an InAs surface inversion layer using an atomic-force-microscope oxidation process. Due to its superior nanofabrication capability, small open-dot structures with the feature size ranging between 100 and 300 nm were successfully fabricated. The magnetoresistance signal measured at 4.2 K showed reproducible fluctuations and a periodic oscillation component that varies in both amplitude and periodicity depending on the dot size. We show that the period of the oscillations corresponds to that of the Aharonov–Bohm effect and propose that the possible mechanism for the oscillations is due to the formation of a one-dimensional electron channel enclosing the open-dot structure as a result of the electron transfer from the InAs oxide to InAs.     

New 6-Arylsulfonyl-1,2-benzoisothiazol-3(2H)-one 1,1-Dioxides Derived from Diphenyl Sulfone Monosulfonyl Chlorides

Various methods were studied for the oxidation of 2-methyl-5-(phenylsulfonyl)benzenesulfamide and its derivatives. The oxidation by sodium dichromate in sulfuric acid was found most efficient. The effects of temperature, concentration, reagent ratio, and time of the oxidation reaction on the yield of the desired product were investigated. Conditions were proposed for obtaining the desired product in yields up to 95%. A synthesis was developed for a series of new saccharin derivatives.     

Determination of styrene in olive oil by an automatic purge-and-trap system coupled to gas chromatography-mass spectrometry

Summary A new gas chromatographic method using an automatic purge-and-trap system coupled to a GC with mass selective detection to analyze styrene at the parts-per-trillions (ng kg^–1) level is described. The method shows a good sensitivity and the detection limit is 10 ng kg^–1 with a relative standard deviation (RSD) of 4.7% for 164 ng kg^–1 styrene in olive oil. This analytical method has been successfully applied to the analysis of styrene in extra-virgin olive oil from the European market.     

Oxidative dehydrogenation of crotonaldehyde overK2HPMo12O40catalyst

Summary The oxidative dehydrogenation of crotonaldehyde to furan and maleic anhydride was carried out over K₂HPMo₁₂O₄₀catalyst. A positive effect of water vapor on furan formation is explained by ability of the catalyst to isomerize 2E- to 2Z-crotonaldehyde.</o:p>     

Catalytic Activity of Nickel Alloys in Anodic Oxidation of the Hypophosphite Ion as a Function of Their Composition

The rate of anodic oxidation of the hypophosphite ion on alloys Ni-P, Ni-B, and Ni-Mo-P is studied as a function of their composition and structure. The organic compounds that are customarily used to stabilize electrolytes of electroless nickel plating are shown to come useful when controlling composition of the Ni-P coatings at the expense of their different influence on the rates of partial processes of deposition of the alloy components. The formation of catalytic activity of such coatings is affected mostly by a structural factor. With alloys Ni-P, Ni-B, and Ni-Mo-P, whose composition was varied by altering the concentration of the source of the alloying component, dependence of catalytic activity of the surface on the composition is defined mainly by an electronic factor.__________Translated from Elektrokhimiya, Vol. 41, No. 8, 2005, pp. 972–980.Original Russian Text Copyright © 2005 by Sotskaya, Dolgikh, Ryabinina.     

On the growth strain origin and stress evolution prediction during oxidation of metals

High temperature oxidation of metals leads to residual stresses in the metal and in the oxide. In this work, we try to predict the evolution of the residual stresses in the growing oxides layers, during isothermal oxidation. The origin of these stresses is based on the microstructural model of Clarke, however, another justification is proposed, assuming a proportional dependence of the growth strain with the oxide layer thickness. Using the mechanics of thin layers, as well as the analysis proposed to describe the growth strain, a system of equations are deduced that predict the stresses evolution with oxidation time. Numerical analysis is performed, leading to a set of theoretical curves.