Catalytic partial oxidation of methane using RhSr- and Ni-substituted hexaaluminates

This paper reports the results of experimental and modeling efforts to characterize partial oxidation of methane to produce synthesis gas (H₂ and CO) using metal-substituted hexaaluminate catalysts in short-contact-time reactors. Hexaaluminate catalysts offer excellent high-temperature stability compared to the equivalent metal-based catalysts. The hexaaluminates are synthesized by a metal-exchange process using alumoxane precursors that enable a wide range of metal substitutions. Of all the combinations tested, RhSr-substituted hexaaluminates yielded the best performance. The catalysts are supported on alumina porous-foam structures, which are positioned within a tube furnace to control the operating temperature. Two-stage combinations of RhSr- and Ni-substituted hexaaluminates are shown to improve conversion activity and selectivity compared to a single-catalyst system.     

Study of intermediates formed in the oxidation of thiols

The oxidation of aminoethanethiol (1) was investigated in acid solutions on a glass carbon anode. It was shown that at relatively low anode potentials thiyl radicals RS^· are released into the solution, but this does not lead to binding of the oxygen in the solution. Raising the anode potential leads to binding of oxygen, which is probably due to the formation of the intermediate RS⁺. The oxidation of 1 was studied in Ce(SO₄)₂+H₂SO₄ solution. It was shown that under certain conditions the intermediate is RS⁺, which subsequently converts to a product that could not be identified as any previously described product of the oxidation of thiols. Proposals are made regarding its structure and conversion pathways.B. P. Konstantinov Institute of Nuclear Physics, Russian Academy of Sciences, 188350 Leningrad. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 2, pp. 278–288, February, 1992.     

Catalysis by Ir(III), Rh(III) and Pd(II) metal ions in the oxidation of organic compounds with H2O2

Catalytic activities of three transition metals, as iridium (III) chloride, rhodium (III) chloride and palladium (II) chloride, were compared in the oxidation of six aromatic aldehydes (benzaldehyde, p‐chloro benzaldehyde, p‐nitro benzaldehyde, m‐nitro benzaldehyde, p‐methoxy benzaldehyde and cinnamaldehyde), two hydrocarbons (viz. (anthracene and phenanthrene)) and one aromatic and one cyclic alcohol (cyclohexanol and benzyl alcohol) by 50% H₂O₂. The presence of traces (substrate: catalyst ratio equal to 1:62500 to 1:1961) of the chlorides of iridium(III), rhodium(III) and palladium(II) catalyze these oxidations, resulting in good to excellent yields. It was observed that in most of the cases palladium(II) chloride is the most efficient catalyst. Conditions for the highest and most economical yields were obtained. Deviation from the optimum conditions decreases the yields. Oxidation in aromatic aldehydes is selective at the aldehydeic group only and other groups remain unaffected. This new, simple and economical method, which is environmentally safe, also requires less time. Reactive species of catalysts, existing in the reaction mixture are also discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of unsaturated polyester resins for large sized composites

A series of unsaturated polyesters based on phthalic anhydride (PHA), maleic anhydride (MA), ethylene glycol (EG), diethylene glycol (DG), triethylene glycol (TG), propylene glycol (PG), styrene (Sty) and acrylonitrile (AN) were prepared. The molecular weights of the prepared polyesters were determined by end-group analysis. The effect of the structure of the resin on its curing behavior has been investigated. On the basis of the experimental study, the following were concluded: (1) The maximum curing temperature (T_max) is related to the molecular weight of the glycol incorporated in these castings. In this context the T_max was found to decrease with increasing the molecular weight. Meanwhile the time to peak temperature t_max was increasing. (2) The higher the percentage of AN in the crosslinking monomer system, the slower a resin cures. (3) The values of T_max were found to be influenced to a large extent by the percentage of AN.     

Electrochemical co-oxidation of C-H acids and methanol as a new route to functionalized cyclopropanes

Electrolysis of dimethyl malonate or methyl cyanoacetate in methanol in the presence of LiCl in an undivided cell leads to formation of 1,1,2,2-cyclopropanetetracarboxylic derivatives.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1835–1836, October, 1994.This work was supported by the International Science Foundation (Grant No MHY 000).     

Microbial Baeyer-Villiger Oxidation of Ketones by Cyclohexanone and Cyclopentanone Monooxygenase – A Computational Rational for Biocatalyst Performance

Summary. Recombinant Escherichia coli overexpressing Pseudomonas sp. NCIMB 9872 cyclopentanone monooxygenase (CPMO, EC 1.14.13.16) and Acinetobacter sp. NCIMB 9871 cyclohexanone monooxygenase (CHMO, EC 1.14.13.22) have been utilized in whole-cell Baeyer-Villiger biotransformations of prochiral bicycloketones. A significant difference in substrate acceptance and stereoselectivity was observed for bicyclo[3.3.0] and bicyclo[4.3.0] substrates. A plausible mechanism of these transformations was established by means of high level DFT/B3LYP calculations suggesting an essential difference in electronic requirements for a successful enzymatic conversion, which was similarly encountered in recombinant whole-cell mediated biooxidations. Some of the lactones produced in the biocatalytic Baeyer-Villiger oxidation represent key intermediates for the synthesis of indole alkaloids.     

Photooxidation of aqueous trichloroethylene using a buoyant photocatalyst with reaction progress monitored via micro-headspace GC/MS

Although photooxidation has previously been shown to be successful in removing organic contaminants from water, methods combining the rapid photooxidation of the desired contaminant with easy catalyst manipulation and removal are few and far between. In the absence of an easy means of catalyst removal, the photooxidation process becomes more costly and time consuming, and photocatalysis cannot be employed as an in situ method for the remediation of aqueous organic contaminants. In this study, the photocatalyst was added to an aqueous trichloroethylene (TCE) solution in the form of TiO₂-coated buoyant microspheres. The solution, placed in a flow-cell photoreactor along with the buoyant catalyst, was irradiated with a UV-filtered Xenon light source. Limited sample sizes necessitated the development of a low-cost headspace GC/MS analysis method, utilizing a standard direct-injection autosampler. This analytical technique aptly monitored reaction progress and indicated that aqueous TCE concentration decreases by nearly 90% in the first hour of irradiation. Subsequent solvent extraction GC/MS analysis indicated that the TCE is initially sorbed by the photocatalyst spheres, but as irradiation continued, TCE is removed from the catalyst spheres surfaces. During the course of irradiation, the expected TCE mineralization product hydrochloric acid appeared, as indicated by a decrease in pH and ion chromatography analysis. The microsphere-born catalyst was easily removed from the treated solution by filtration. Thus, it is possible that a method for effective, low-cost in situ photooxidation of aqueous organic contaminants will be realized in the near future.     

Catalytic air oxidation of ambient temperature hydrocarbons

Catalytic air oxidation of the aliphatic hydrocarbons n-decane, hexanes, gasoline and diesel fuel was conducted at ambient temperature with novel iron catalysts. The concentration of n-decane in water was reduced from 1.42 g in 100 ml to 0.07 g in 100 ml in 5 h at room temperature forming carbon monoxide and water by means of intermediate aldehydes. Results of FT–IR and GC–MS analyses demonstrated formation of aldehydes and unsaturated alcohols. Carbon monoxide was detected on catalyst residues and in the vapor phase. The indicated catalytic reaction mechanisms are discussed.     

Synthesis of a new tricyclic 3-(tetrazol-5-yl)pyridine system from 2-(azidomethyl)nicotinonitriles

2-Methyl-3-cyanopyridines were converted into the corresponding 2-azidomethyl derivatives, which then underwent an intramolecular cycloaddition reaction. A novel heterocyclic system containing a 3-(tetrazol-5-yl)pyridine unit was obtained in this way.