Synthesis, crystal structure and magnetic property of a new 1D molecular material [1-(4′-chlorobenzyl)-4-aminopyridinium](+) bis(maleonitriledithiolato)nickel(-)

A new ion-pair complex, [1-(4′-chlorobenzyl)-4-aminopyridinium](+)bis(maleonitrile-dithiolato)nickel(−),[ClbzPyNH₂][Ni(mnt)₂] (1), has been prepared and characterized. X-ray single crystal structure conforms that the Ni(mnt)₂⁻ anions and [ClbzPyNH₂]⁺ cations of 1 form completely segregated uniform stacking columns with the Ni?Ni distance 3.944 Å in the Ni(mnt)₂⁻ stacking column. The temperature dependence of the magnetic susceptibility reveals that 1 undergoes a magnetic transition, and exhibits ferromagnetic interaction in the high-temperature phase and spin gap system in the low-temperature phase.     

EPR spin probe and spin label studies of some low molecular and polymer micelles

The rotational mobility of spin probes of different shape and size in low molecular and polymer micelles has been studied. Several probes having nitroxide fragment localized either in the vicinity of micelle interface or in the hydrocarbon core have been used. Upon increasing the number of carbon atoms in hydrocarbon chain of detergent from 7 to 13 (sodium alkyl sulfate micelles) or from 12 to 16 (alkyltrimethylammonium bromide micelles) the rotational mobility of spin probes is decreased by the factor 1.5–2.0. The spin probe rotational mobility in polymer micelles (the complexes of alkyltrimethylammonium bromides and polymethacrylic or polyacrylic acids) is less than mobility in free micelles of the same surfactants. The study of EPR-spectra of spin labeled polymethacrylic acid (PMA) indicated that formation of water soluble complexes of polymer and alkyltrimethylammonium bromides in alkaline solutions (pH 9) does not affect the polymer segmental mobility. On the other hand, the polymer complexes formation in slightly acidic water solution (pH 6) breaks down the compact PMA conformation, thus increasing the polymer segmental mobility. Possible structures of polymer micelles are discussed.     

内含式化合物X@B12P12的结构与稳定性研究

采用B3LYP/6-31G*方法，对内含式化合物X@B₁₂P₁₂(X=Li^0/+、Na^0/+、K^0/+、Be^0/2+、Mg^0/2+、Ca^0/2+、H和He)的不同对称性构型进行了计算，讨论其最稳定构型的几何参数、布居分析、偶极矩、电离势、包含能、振动频率、能隙和自旋密度． 发现在X@B₁₂P₁₂化合物中，客体X=Li、Na^0/+、K^0/+、Mg^0/2+、Ca^0/2+和He处在偏离笼的中心0.006 nm的半径内． Be²⁺沿着C₃轴偏离中心点0.279 nm． 在Be@B₁₂P₁₂和H@B₁₂P₁₂的基态结构中，Be和H与笼上的B原子成键． 除Li@B₁₂P₁₂、 Be²⁺@B₁₂P₁₂和He@ B₁₂P₁₂外， 其余结构为C_s对称稳定构型．     

A simple approach for improving the hybrid MMVB force field: application to the photoisomerization of s-cis butadiene

MMVB is a QM/MM hybrid method, consisting of a molecular mechanics force field coupled to a valence bond Heisenberg Hamiltonian parametrized from ab initio CASSCF calculations on several prototype molecules. The Heisenberg Hamiltonian matrix elements Q(ij) and K(ij), whose expressions are partitioned here into a primary contribution and second-order correction terms, are calculated analytically in MMVB. When the original MMVB force field fails to produce potential energy surfaces accurate enough for dynamics calculations, we show that significant improvements can be made by refitting the second-order correction terms for the particular molecule(s) being studied. This "local" reparametrization is based on values of K(ij) extracted (using effective Hamiltonian techniques) from CASSCF calculations on the same molecule(s). The method is demonstrated for the photoisomerization of s-cis butadiene, and we explain how the correction terms that enabled a successful MMVB dynamics study [Garavelli, M.; Bernardi, F.; Olivucci, M.; Bearpark, M. J.; Klein, S.; Robb, M. A. J Phys Chem A 2001, 105, 11496] were refitted.     

EPR studies on H-abstraction from methylbenzenes by “magic blue” reagent

After mixing a methylbenzene 4 with “magic blue” solution in F113 (CClF₂CCl₂F) containing bis{perfluoro[1-(2-fluorosulfonyl)ethoxy]ethyl}nitroxide 2 and perfluoro-1-nitroso-1-[1-(2-fluorosulfonyl)ethoxy]ethane 3 at room temperature, benzylic H-atom of 4 could be selectively abstracted by 2, and benzyl radical 5 thus generated was immediately trapped by 3. Based on hyper-fine splitting constants (hfsc), the structure of the spin adducts perfluoro[1-(2-fluorosulfonyl)ethoxy]ethyl benzyl nitroxides 6 derived from seven methylbenzenes have been identified. The mechanism of the H-abstraction/spin trapping process is also discussed.     

The Role of Binary and Many-centre Molecular Interactions in Spin Crossover in the Solid State. Part II. Non-ideality Parameters Defined via Binary Molecular Potentials

Summary. Parameters of the formalism [1–6] describing spin crossover in the solid state have been defined via molecular potentials in model systems of neutral and ionic complexes. In the first instance Lennard-Jones and electric dipole–dipole potentials have been used whereas in ionic systems Lennard-Jones and electric point-charge potentials have been used. Electric dipole–dipole interaction of neutral complexes brings about a positive excess energy controlled by the difference of electric dipole moments of HS and LS molecules. Differences of the order of Δμ = 1–2 D cause an abrupt spin crossover in systems with T_1/2 = 100–150 K. Magnetic coupling contributes both to the excess energy and excess entropy, however the overall effect is equivalent to a modest positive excess energy. Ionic systems in the absence of specific interactions are characterised by very small excess energies corresponding to practically linear van’t Hoff plots. Detectable positive and negative excess energies in these systems may arise from interactions of ligands belonging to neighbouring complexes. The HOMO–LUMO overlap in HS–LS pairs can bring about a nontrivial variation of the shape of transition curves. Examples of regression analysis of experimental transition curves in terms of molecular potentials are given.     

Initiation Mechanism of Polymerization of Acryl－amide by Ceric Ion／2－Benzoyl Acetanilide System

ＩｎｉｔｉａｔｉｏｎＭｅｃｈａｎｉｓｍｏｆＰｏｌｙｍｅｒｉｚａｔｉｏｎｏｆＡｃｒｙｌ－ａｍｉｄｅｂｙＣｅｒｉｃＩｏｎ／２－ＢｅｎｚｏｙｌＡｃｅｔａｎｉｌｉｄｅＳｙｓｔｅｍＤＯＮＧＪｉａｎ－ｈｕａ，ＤＥＮＧＣｈａｏ，ＱＩＵＫｕｎ－ｙｕａｎａｎｄＦＥＮＧ...     

光子的自旋与光波的偏振

从宏观以及微观两个方面对光子的自旋与光波的偏振态作了简要的说明,并从原子角动量的变化规律说明了角动量与光子自旋之间的关系,也为进一步研究光的本性提供了一些观点。     

Perturbational approach to the electron correlation cusp applied to helium‐like atoms

A recently proposed perturbational approach to the electron correlation cusp problem 1 is tested in the context of three spherically symmetrical two‐electron systems: helium atom, hydride anion, and a solvable model system. The interelectronic interaction is partitioned into long‐ and short‐range components. The long‐range interaction, lacking the singularities responsible for the electron correlation cusp, is included in the reference Hamiltonian. Accelerated convergence of orbital‐based methods for this smooth reference Hamiltonian is shown by a detailed partial wave analysis. Contracted orbital basis sets constructed from atomic natural orbitals are shown to be significantly better for the new Hamiltonian than standard basis sets of the same size. The short‐range component becomes the perturbation. The low‐order perturbation equations are solved variationally using basis sets of correlated Gaussian geminals. Variational energies and low‐order perturbation wave functions for the model system are shown to be in excellent agreement with highly accurate numerical solutions for that system. Approximations of the reference wave functions, described by fewer basis functions, are tested for use in the perturbation equations and shown to provide significant computational advantages with tolerable loss of accuracy. Lower bounds for the radius of convergence of the resulting perturbation expansions are estimated. The proposed method is capable of achieving sub‐μHartree accuracy for all systems considered here. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2003     

On the surface modification of microchannels for microcapillary electrophoresis chips

This paper presents systematic investigation of the microchannel surface properties in microCE chips. Three popular materials for microCE chips, polydimethylsiloxane (PDMS), quartz, and glass, are used. The zeta potentials of these microchannels are calculated by measuring the EOF velocity to evaluate the surface properties after surface modification. The hydrophobic PDMS is usually plasma-treated for microCE applications. In this study, a new method using a high-throughput atmospheric plasma generator is adopted to treat the PDMS surface under atmospheric conditions. In this approach, the cost and time for surface treatment can be significantly reduced compared with the conventional vacuum plasma generator method. Experimental results indicate that new functional groups could be formed on the PDMS surface after treatment, resulting in a change in the surface property. The time-dependent surface property of the plasma-treated PDMS is then measured in terms of the zeta potential. Results show that the surface property will reach a stable condition after 1 h of plasma treatment. For glass CE chips, two new methods for changing the microchannel surface properties are developed. Instead of using complicated and time-consuming chemical silanization procedures for CE channel surface modification, two simple and reliable methods utilizing organic-based spin-on-glass and water-soluble acrylic resin are reported. The proposed method provides a fast batch process for controlling the surface properties of glass-based CE channels. The proposed methods are evaluated using PhiX-174 DNA maker separation. The experimental data show that the surface property is modified and separation efficiency greatly improved. In addition, the long-term stability of both coatings is verified in this study. The methods proposed in this study show potential as an excellent solution for glass-based microCE chip surface modification.