无溶剂路线制备分子筛封装的钴基催化剂及其在费托合成制汽油反应中的应用（英文）

自2012年浙江大学肖丰收教授(J.Am.Chem.Soc.,2012,134,15173-15176)首次提出无溶剂法合成分子筛以来,该路线已备受关注.无溶剂合成分子筛方法具有废液少、产率高、安全系数高等优点.本文针对合成气经费托路线(FTS)一步法制备富含异构烷烃汽油馏分的研究,通过无溶剂研磨法制备了分子筛封装金属催化剂.一般来说,烷烃异构化催化剂的性能主要取决于分子筛的孔道结构及其酸性,其次是分子筛晶粒大小、结晶度和表面性质等因素.本文对比了三种具有相同拓扑结构的MFI分子筛(Silicalite-1,HZSM-5和NaZSM-5)对汽油和异构烷烃选择性的影响规律.结果显示,在CO转化率(~30%)近似相同的情况下,具有最弱酸性的Silicalite-1封装的Co颗粒表现出最高的汽油选择性(~70%)和异构烷烃选择性(~30.7%).这意味着正构烷烃异构化反应只需要弱酸即可实现,较强的酸性则会使其发生过度裂解反应.Py-IR谱图显示,Silicalite-1在1445 cm-1附近的L酸是区别于NaZSM-5和HZSM-5的一个重要酸性位,可作为FTS路线制备富含异构烷烃汽油的一个关键参数.另外,与封装型(Co@MFI)催化剂相比,浸渍型催化剂(Co/MFI)的汽油选择性明显偏低,可能与金属活性位与分子筛酸性位之间的距离有直接关系.因此,无溶剂合成分子筛是一条具有前景和适宜放大的催化剂合成路线.对于合成气经费托路线制取富含异构烷烃汽油反应,正构烷烃在分子筛催化剂上的裂解和异构化之间的竞争反应是核心问题.未来有待突破的研究方向包括:(1)多支链异构烷烃的合成,目前对于有效调控多支链烷烃的生成关注较少;(2)反应路线的设计,合成气经甲醇路线,联合甲醇制汽油(MTG)反应获得异构烷烃;(3)裂解反应的抑制;(4)分子筛孔道/笼对异构烷烃选择性的调控机制.     

Zinc oxide nanoparticles:A highly efficient and readily recyclable catalyst for the synthesis of xanthenes

A novel and efficient route for the synthesis of 1,8-dioxooctahydroxanthenes and 14-aryl-14H-dibenzo[a,j]xanthenes is described through one-pot multi-component reaction of dimedone and 2-naphthol with various aryl aldehydes using ZnO nanoparticles under solvent-free conditions.This method provides a novel and improved pathway for the synthesis of xanthenes in the terms of excellent yields,short reaction times,reusability and low catalyst loading.     

Solvent-free synthesis of oxides for CuInSe2 thin films fabrication

A low-cost non-vacuum process for fabrication of CuInSe₂ (CIS) films by solvent-free mechanochemical method and spin-coating process is described. First, highly monodisperse Cu, In oxides nanoparticles are synthesized via a facile, solvent-free route, which is the first applied in the CIS solar cells. Second, the oxide particulate precursors are deposited in a thin layer by spin-coating technique. Finally, the dry layers are sintered into CIS thin films with composition control by sequential reduction and selenization. Through X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), it is found that near stoichiometric CIS films with a micron-sized dense grains are obtained in our work. Three types of mixed nitrates are used to fabricate oxides, the influence of the degree of mixing on the CIS films have been investigated.     

无溶剂Fe3O4纳米流体的制备及表征

采用共沉淀法合成Fe3O4纳米粒子, 将含有硅氧烷基的离子型改性剂二甲基十八烷基氯化铵与Fe3O4纳米粒子进行接枝反应, 再用脂肪醇聚氧乙烯醚磺酸盐的长链阴离子交换Cl-, 在Fe3O4纳米粒子表面生成具有阴、 阳离子双电层结构的表面处理层, 得到无溶剂Fe3O4纳米流体. 研究结果表明, 在Fe3O4纳米粒子表面成功接枝了有机物长链, 改性的Fe3O4纳米粒子呈单分散分布, 其损耗剪切模量G″明显大于储能剪切模量G', 具有明显的流体行为, 在室温下即可流动.     

活性炭负载壳聚糖催化室温无溶剂Knoevenagel缩合反应

通过活性炭(AC)负载壳聚糖(CS)的方法,制备了负载型的"壳聚糖/活性炭"催化剂(CS/AC)。利用FT-IR、XRD、TG-DTG、SEM、BET、元素分析等方法对催化剂进行表征,并系统研究了该催化剂在Knoevenagel缩合反应中的催化性能。结果表明,催化剂具有较好的活性,在室温无溶剂条件下,可以催化一系列芳香醛化合物与活泼亚甲基化合物进行缩合反应,产率均在80%以上;且反应体系放大100倍时,仍然保持较高的催化效率;此外,该催化剂具有较好稳定性,重复使用8次后,仍然保持较高的催化活性。     

Catalyst- and solvent-free mechanochemical synthesis of isoxazoles from N-hydroxybenzimidoyl chlorides and enamino carbonyl compounds

A regioselective, solvent-free and catalyst-free synthesis of isoxazoles has been successfully developed under ball milling conditions. Milling the mixtures of N-hydroxybenzimidoyl chlorides and enamino carbonyl compounds in a ball mill at a frequency of 14.6?Hz for 20–60?min afforded isoxazoles in up to 86% yields. A possible reaction mechanism leading to the formation of the observed isoxazoles is proposed.     

One-pot synthesis of 3-(furan-2-yl)-4-hydroxy-2H-chromen-2-ones using K10 montmorillonite clay as heterogeneous catalyst

A facile and efficient one-pot synthesis of 3-(furan-2-yl)-4-hydroxy-2H-chromen-2-ones was developed. The reaction of ethyl 3-(2-hydroxyphenyl)-3-oxopropanoates and 2,5-dimethoxy-2,5-dihydrofuran were performed in presence of K10 Montmorillonite Clay heterogeneous catalyst under the solvent-free condition at 80?°C for 1?h, and followed by further converted to 3-(furan-2-yl)-4-hydroxy-2H-chromen-2-ones via refluxing in the alkaline EtOH solution for 0.5?h. The demonstrate method not only avoided the usage of any expensive transition-metals, but also eliminated the tedious intermediate purification. Moreover, due to the wide functional group tolerance, it could be applied to various substrates and gave product in good to excellent yields.     

Recent advances in mechanochemical C–H functionalization reactions

The mechanochemical synthesis has provided a greener alternative to solution-based approaches by eliminating the use of organic solvents and reducing the energy consumption. The C–H functionalization is among the most concise and economical synthetic strategies. The combination of the benefits from these two methods provides new opportunities to further increase the efficiency and sustainability of organic synthesis. In this digest, we aim to provide a brief overview of the recent advances in mechanochemical C–H functionalization reactions.     

Solvent-free,catalyst-free aza-Michael addition of cyclohexylamine to diethyl maleate: Reaction mechanism and kinetics

The aza-Michael reaction is the addition of an amine to an electron deficient C=C double bond. This reaction is also used in the synthesis of precursors of polymeric networks. In this study, we paid attention to the kinetics and mechanism of the aza-Michael addition of cyclohexylamine (CHXA) to diethyl maleate (DEM) performed as a solvent-free, catalyst-free reaction and to concurrent reactions. In situ Raman spectroscopy, NMR spectroscopy and gas chromatography/mass spectrometry have shown the occurrence of three simultaneous reactions: (i) the aza-Michael addition of CHXA to DEM leading to diethyl 2-(cyclohexylamino)succinate, (ii) isomerization of DEM to diethyl fumarate (DEF), and (iii) the aza-Michael addition of CHXA to DEF formed by the reaction (ii). All of these reactions proceed with third order kinetics, first order in DEM or DEF and second order in CHXA. We propose a kinetic model that allows kinetic constants to be estimated. Furthermore, a numerical solution of the set of differential equations confirms the expected kinetic equations of reactions (i) and (ii) and gives values of rate constants comparable to the estimated ones. A DFT mechanistic study illustrates the structure of the reaction intermediates and transition states of all reactions and explains the contribution of the second amine molecule in the reaction mechanism.     

Rh(I)-catalyzed solvent-free ortho-alkylation of aromatic imines under microwave irradiation

The synthesis of ortho-alkylated ketones through a chelation-assisted Rh (I) catalyzed ortho-alkylation reaction of aromatic imines under microwave activated solvent-free conditions in monomode reactors was performed. These conditions have been also applied to hydroacylation and ortho-alkylation reactions with aldimines.