PMMA纳米球的制备及其银膜包覆技术

采用无皂乳液聚合法制备了单分散、直径为170 nm左右的聚甲基丙烯酸甲酯(PMMA)纳米球, 然后利用3-甲基丙烯酰氧基丙基三甲氧基硅烷(MATS)和3-巯丙基三甲氧基硅烷(MPTMS)对PMMA纳米球进行表面改性, 在其表面包覆一层均匀的巯基, 通过巯基与银离子之间的相互作用, 使银在PMMA纳米球表面成核长大, 从而合成PMMA/Ag纳米球壳粒子. 通过扫描电子显微镜、投射电子显微镜和紫外-可见吸收光谱测试技术对产物性能进行了表征, 研究结果表明, 制备的PMMA/Ag纳米球壳粒子的分散性好、包覆均匀.     

Green synthesis and physical properties of crystalline silica engineering nanomaterial from rice husk (agriculture waste) at different annealing temperatures for its varied applications

Crystalline nano silica (SiO₂) was synthesized using a cost-effective eco-friendly method from agricultural waste material like rice husk. Polymer nanocomposite has been prepared using the sol-gel technique from crystalline nano silica using PVA as a polymer binder. Thermal analysis measurement is employed to investigate thermal stability. The XRD analysis shows the crystalline nature of silica is revealed to have characteristic peaks of SiO₂. The particle size was evaluated using Schererr's formula and found to be in the range of 21–31 nm. FTIR measurement shows the presence of O–Si–O (silane) bond formation. The PL measurement shows broad excitation prominently in the visible region. In the XRD pattern, a major peak of the Nanocomposite is observed at an angular position of 19.5° degree, which is more prominent than that of the PVA with the addition of 0.2 wt percent Nano silica to the PVA composite. SEM provides information on homogeneous distribution. This could be beneficial in terms of higher mechanical qualities as well as multifunctional properties. By hydrogen bonding, the PVA molecules are strongly linked to each SiO₂ nanoparticle as measured by FTIR. The stability of materials is confirmed by Zeta Potential and DLS. In the photoluminescence property of SiO₂-PVA crystalline Nano silica composite is excited using a radiation wavelength of 200 nm. The indirect bandgap was determined to be 4.28 eV which could be attributed to the 1100 °C annealing temperature. Such materials may be used as a semiconductor material obtained from a direct natural source, rice husk. Thus, in the present research structural, physical, and optical properties of crystalline nano silica and its polymer composite are explored, which leads us to prepare technological grads material from agricultural waste for varied applications including Agriculture to medical science.     

Effect of Direct yellow 50 removal from an aqueous solution using nano bentonite; adsorption isotherm,kinetic analysis and also thermodynamic behavior

The developing countries are suffering from the toxicity of different industrial effluents, especially dyes that contaminate water systems. This study successfully explained the preparation and characterization of nano bentonite to extract Direct Yellow Fifty (DY50). Direct Yellow 50 is an organic contaminant that may affect the quality of water. The characterization of prepared nanoparticles was done using Scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FTIR). The impact of different operating conditions was studied using different pH, dose, temperature, contact time, and initial DY50 concentrations. The obtained results indicated that nano bentonite could adsorb about 94 % at initial concentrations of 40 mg/L, respectively. The optimum removal conditions were observed at an acidic pH (pH 3) using a sorbent material dosage of 0.05 g for 4 h at 30 °C. The adsorption isotherm, kinetic analysis, and thermodynamic behavior were studied using linear equation form, and the adjusted R² was compared to detect the preferred models. The adsorption behavior pseudo-second order kinetics, and fitted Langmuir isotherm model, respectively, showed the chemisorption interactions between adsorbed and sorbed molecules. Thermodynamic behavior indicated that the reaction was exothermic. Finally, this study strongly recommended using nano bentonite for DY50 removal from an aqueous solution.     

Capillary electrochromatography and nano‐liquid chromatography coupled to nano‐electrospray ionization interface for the separation and identification of estrogenic compounds

Nano‐LC and CEC were coupled to MS through a nanospray or a pressurized liquid‐junction interface for the simultaneous separation and determination of 11 estrogenic compounds. Different stationary phases, that is, phenyl, C18, and C18 bidentate silica hydrate, were studied. For both techniques, the phenyl stationary phase was the best option, considering separation efficiency, selectivity, and resolution. Under the optimized conditions, the baseline separation of the target compounds (including estradiol and zearalanol epimers) was achieved in less than 20 min in nano‐LC‐MS and less than 13 min in CEC‐MS. Molecular imprinted polymer SPE was used for extracting the target compounds from mineral water samples with the analysis of nano‐LC‐MS. The whole molecular imprinted polymer SPE nano‐LC‐MS method was validated through a recovery study at two levels of concentration. Sensitivity was improved by on‐column focusing technique obtaining LODs in the range 1.4–55.4 ng/L.     

Mineral formation on dentin induced by nano-bioactive glass

The object of this study was to evaluate the effect of bioactive glass (BG) size on mineral formation on dentin surfaces. Totally demineralized dentin discs were treated using BG suspensions with different particle sizes:i.e., microscale bioactive glass (m-BG), submicroscale bioactive glass (sm-BG) and nanoscale bioactive glass (n-BG). Field-emission scanning electron microscopy and 3D profile measurement laser microscopy were used to observe the surface morphology and roughness. It was found that all BG particles could promoted mineral formation on dentin surfaces, while plug-like depositions were observed on the dentin discs treated by n-BG and they were more acid-resistant. The present results may imply that n-BG has potential clinical application for dentin hypersensitivity treatment.     

酶提取-单颗粒电感耦合等离子质谱法分析樱桃番茄纳米银颗粒及其吸收规律研究

为探究复合保鲜涂膜中AgNPs的迁移情况,采用酶提取的前处理方式,结合单颗粒电感耦合等离子体质谱（SP-ICP-MS）,考察了前处理方式、驻留时间、校准方式以及Ag+浓度等条件对AgNPs准确测定的影响。结果表明：0.1 g樱桃番茄样品在柠檬酸盐体系下使用0.2 g的R-10离析酶可达到消解最适酶剂量;当驻留时间小于100 μs时,测定结果有较好的积分条件以及较高的信背比;采用AgNP尺寸方式进行校准比单独用Ag+标准溶液校准方式的颗粒尺寸测定结果更加准确。采用该方法测定樱桃番茄中加标AgNPs颗粒回收率达到88.9%,粒径实测值为47.8±0.3 nm,粒径检出限为13 nm,颗粒浓度检出限为 7.5×104 particles/L。通过将樱桃番茄暴露于AgNPs涂膜中来探究AgNPs迁移行为,复合保鲜涂膜后的樱桃番茄通过三次洗涤后能够在表面去除大部分AgNPs,但仍有少量AgNPs穿过果表皮浸入果肉组织。该方法灵敏度高,操作简单,能够为揭示AgNPs在农产品及农业生产中的风险提供可靠、准确的表征方法。     

单分子结的构筑及分子电导性质的测试

分子电子学已成为21世纪研究的热点. 通过将具有特定功能的分子连接在纳米尺度金属电极之间从而构筑包括分子导线、开关、整流器在内的各种分子尺度电子器件, 这引起了科学家们广泛的研究兴趣. 在分子电子学研究中, 构筑金属/分子/金属(MMM)分子结是研究分子器件中电子传输性质的关键. 尽管已经取得了很大的进展, 目前在纳米尺度下构筑稳定可靠的MMM分子结并测试单个分子的电学性质仍然面临很多挑战. 本文着重对单分子电学性质的测试技术和相关理论研究的最新进展以及存在的挑战做了概述.     

Adsorption of benzene from benzene/n-C6 and n-C7 mixture by nano Beta zeolite with different Si/Al ratios

The adsorption of benzene from benzene/n-alkane mixtures was studied by two types of nano Beta zeolite with Si/Al ratios of 11.5 and 24.5. Benzene was adsorbed into benzene/n-hexane and n-heptane mixtures which had 0.5% up to 10% mole fraction of benzene using batch technique in the ambient temperature. The nano Beta zeolite has active sites on its surface, which have interaction with π electron in benzene, and this can increase the heat of adsorption. The Si/Al ratio defines the number of active sites in the zeolite surface and the heat of adsorption. However, an increase in the active sites of Beta zeolite declines the entropy of adsorption. Therefore, free energy of mixing specifies the potential of adsorption in Beta zeolite.As the results indicated in all mixtures, benzene is adsorbed more than n-hexane and n-heptane into the Beta zeolite surface, which suggests that this type of zeolite has a high separation factor (∼50) for benzene in Beta zeolite (Si/Al = 24.5). Also, Beta zeolite with Si/Al = 24.5 had a greater separation factor than Beta zeolite with Si/Al = 11.5 in similar mixtures.     

Ionic Liquid-assisted Formation of Lanthanide Metal-organic Framework Nano/Microrods for Superefficient Removal of Congo Red

New lanthanide metal-organic framework(MOF) nano/microrods, [C₄mim]Cl-Eu-MOF, [C₈mim]Cl-Eu- MOF and [C₁₂mim]Cl-Eu-MOF, were conveniently synthesized via an ionic liquid-assisted hydrothermal method and characterized by means of powder X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), thermogravimetric analysis(TG) and transmission electron microscopy(TEM). The obtained nano/microrods with low surface areas were efficient for the removal of Congo red(CR) from aqueous solutions. Under the optimum conditions, [C₄mim]Cl-Eu-MOF with a specific surface area of 5.1 m²/g exhibited an ultrahigh adsorption capacity of 2606 mg/g toward CR. Notably, the adsorption efficiency of [C₄mim]Cl-Eu-MOF for CR via nano/microscale stacking can be directly demonstrated by TEM. In-depth understanding of CR removal by [C₄mim]Cl-Eu-MOF nano/microrods was also supported by FTIR, Raman spectroscopy and zeta potential analyses.     

Preparation and characterization of Fe3O4 magnetic composite microspheres covered by a P(MAH-co-MAA) copolymer

A magnetic core–shell-layered polymer microsphere (MPS) was successfully synthesized by a dispersion polymerization route, where the modified Fe₃O₄ nanoparticles (MFN) were used as a core, while poly(maleic anhydride-co-methacrylic acid) P(MAH-co-MAA) as a shell was covered on the surface of the Fe₃O₄ nanoparticles. Environmental scanning electron microscope (ESME) and transmission electron microscope (TEM) measurements indicate that the magnetic P(MAH-co-MAA)/Fe₃O₄ composite microspheres assume sphericity and have a novel core–shell-layered structure. The crystal particle sizes of the unimproved Fe₃O₄ and the MFN samples vary from 8 to 16 nm in diameter, and the average size is about 10.6 nm in diameter. The core–shell magnetic composite microspheres can be adjusted by changing the stirring speed. Since multiple Fe₃O₄ cores were coated with a proper percentage of P(MAH-co-MAA) copolymers, and therefore lower density was acquired for the MPS, which improved sedimentation and dispersion behavior. The saturated magnetization of pure Fe₃O₄ nanoparticles reaches 48.1 emu g⁻¹ and the value for composite nanoparticles was as high as 173.5 emu g⁻¹. The nanoparticles show strong superparamagnetic characteristics and can be expected to be used as a candidate for magnetism-controlled drug release.