单模激光系统中信噪比对净增益的随机共振

研究了受信号调制的色泵噪声和实虚部间关联的量子噪声驱动的单模激光系统的随机共振现象,发现信噪比随激光系统净增益系数存在随机共振.当泵噪声自关联时间和调制信号频率增加时,信噪比随激光系统净增益系数的变化曲线经历了从同时出现共振和抑制到单调上升的演化过程;当调制信号振幅、泵噪声强度和量子噪声强度、量子噪声实虚部间关联系数等变化时,该曲线一直同时出现共振和抑制,但共振峰和抑制谷有很大的变化.     

Sensitivity and resolution in proton solid-state NMR at intermediate deuteration levels: quantitative linewidth characterization and applications to correlation spectroscopy

We present a systematic study of proton linewidths in rigid solids as a function of sample spinning frequency and proton density, with the latter controlled by the ratio of protonated and perdeuterated model compounds. We find that the linewidth correlates more closely with the overall proton density (rho(H)) than the size of local clusters of (1)H spins. At relatively high magic-angle spinning (MAS) rates, the linewidth depends linearly upon the inverse MAS rate. In the limit of infinite spinning rate and/or zero proton concentration, the linewidth extrapolates to a non-zero value, owing to contributions from scalar couplings, chemical shift dispersion, and B(0) field inhomogeneity. The slope of this line depends on the overall concentration of unexchangeable protons in the sample and the spinning rate. At up to 30% protonation levels ( approximately 2 (1)H/100A(3)), proton detection experiments are demonstrated to have a substantial (2- to 3-fold) sensitivity gain over corresponding (13)C-detected experiments. Within this range, the absolute sensitivity increases with protonation level; the optimal compromise between sensitivity and resolution is in the range of 20-30% protonation. We illustrate the use of dilute protons for polarization transfer to and from low-gamma spins within 5A, and to be utilized as both magnetization source and detection spins. The intermediate protonation regime enhances relaxation properties, which we expect will enable new types of (1)H correlation pulse sequences to be implemented with improved resolution and sensitivity.     

Analytically exact correction scheme for signal extraction from noisy magnitude MR signals

An analytically exact method is proposed to extract the signal intensity and the noise variance simultaneously from noisy magnitude MR signals. This method relies on a fixed point formula of signal-to-noise ratio (SNR) and a correction factor. The correction factor, which is a function of SNR, establishes a fundamental link between the variance of the magnitude MR signal and the variance of the underlying Gaussian noise in the two quadrature channels. A more general but very similar method is developed for parallel signal acquisitions with multiple receiver coils. In the context of MR imaging, the proposed method can be carried out on a pixel-by-pixel basis if the mean and the standard deviation of the magnitude signal are available.     

Measurement of Signal‐to‐Noise Ratio In Graphene‐based Passive Microelectrode Arrays

This work aims to investigate the influence of various electrode materials on the signal‐to‐noise ratio (SNR) of passive microelectrode arrays (MEAs) intended for use in neural interfaces. Noise reduction substantially improves the performance of systems which electrically interface with extracellular solutions. The MEAs are fabricated using gold, indium tin oxide (ITO), inkjet printed (IJP) graphene, and chemical vapor deposited (CVD) graphene. 3D‐printed Nylon reservoirs are adhered to glass substrates with identical MEA patterns and filled with neuronal cell culture media. To precisely control the electrode area and minimize the parasitic coupling of metal interconnects and solution, SU‐8 photoresist is patterned to expose only the area of the electrode to solution and cap the remainder of the sample. Voltage signals with varying amplitude and frequencies are applied to the solution using glass micropipettes, and the response is measured on an oscilloscope from a microprobe placed on the contact pad external to the reservoir. The time domain response signal is transformed into a frequency spectrum, and SNR is calculated. As the magnitude or the frequency of the input signal gets larger, a significantly increased signal‐to‐noise ratio was observed in CVD graphene MEAs compared to others. This result indicates that 2‐dimensional nanomaterials such as graphene can provide better signal integrity and potentially lead to improved performance in hybrid neural interface systems.     

Effect of Sample Temperature on Radiation Characteristics of Nanosecond Laser-Induced Soil Plasma

An Nd:YAG single pulse nanosecond laser of 532 nm wavelength with an 8 ns pulse width was projected on the soil samples collected from the campus of Bengbu College under 1 standard atmospheric pressure. Laser-induced breakdown spectroscopy at different sample temperatures was achieved. The intensity and signal-to-noise ratio (SNR) changes of different characteristic spectral lines could be analyzed when the sample temperature changes. The evolution of plasma electron temperature and electron density with the sample temperature was analyzed through Boltzmann oblique line method and Stark broadening method. The cause of the radiation enhancement of laser-induced metal plasma was discussed. Experimental results demonstrated that the spectral intensity, SNR, the electron temperature and electron density of plasma are positively related to the sample temperature, and reach saturation at 100 ℃.     

Stochastic resonance in an asymmetric bistable system driven by multiplicative and additive Gaussian noise and its application in bearing fault detection

The phenomenon of stochastic resonance (SR) in a new asymmetric bistable model is investigated. Firstly, a new asymmetric bistable model with an asymmetric term is proposed based on traditional bistable model and the influence of system parameters on the asymmetric bistable potential function is studied. Secondly, the signal-to-noise ratio (SNR) as the index of evaluating the model are researched. Thirdly, Applying the two-state theory and the adiabatic approximation theory, the analytical expressions of SNR is derived for the asymmetric bistable system driven by a periodic signal, unrelated multiplicative and additive Gaussian noise. Finally, the asymmetric bistable stochastic resonance (ABSR) is applied to the bearing fault detection and compared with classical bistable stochastic resonance (CBSR) and classical tri-stable stochastic resonance (CTSR). The numerical computations results show that:(1) the curve of SNR as a function of the additive Gaussian noise and multiplicative Gaussian noise first increased and then decreased with the different influence of the parameters a, b, r and A; This demonstrates that the phenomenon of SR can be induced by system parameters; (2) by parameter compensation method, the ABSR performs better in bearing fault detection than the CBSR and CTSR with merits of higher output SNR, better anti-noise and frequency response capability.     

核磁共振高信噪比弱信号检测的理论与实验研究

基于小型射频线圈的核磁共振检测探头在波谱分析和成像研究中具有广泛的应用,如化学位移波谱分析、磁共振成像和勘探测井等技术领域。但是,由于外加静磁场作用下,自旋体系发生塞曼能级分裂后,高低能态之间的核自旋数量之差很小,普遍存在检测信噪比很低的问题,而且初级磁共振接收信号的质量受所用探头线圈电气参数的影响较大。研究结果表明,在特定的被测样品和接收线圈占空比以及静磁场等条件不变的情况下,检测信噪比与单位电流产生的射频磁场成正比,而与线圈高频电阻的平方根成反比。在永磁0.39Tesla主磁场条件下,研究了趋肤效应影响下小型螺线管线圈几何参数的优化设计方法。理论仿真和实际的测量结果表明,几何参数为线径0.5 mm、直径5.5 mm的10匝微螺线管线圈,在16.9 MHz谐振频率上,相对信噪比取得一个极大值点,对应的Q值约为199.8,与阻抗分析仪测得结果有较好的吻合,验证了该核磁共振检测线圈设计新方法是合理的。本文提出的基于线圈电磁特性的高信噪比检测探头设计方法,可推广到目前的质子密度成像、岩心弛豫谱分析等应用中。     

MRI dynamic range and its compatibility with signal transmission media

As the number of MRI phased array coil elements grows, interactions among cables connecting them to the system receiver become increasingly problematic. Fiber optic or wireless links would reduce electromagnetic interference, but their dynamic range (DR) is generally less than that of coaxial cables. Raw MRI signals, however, have a large DR because of the high signal amplitude near the center of k-space. Here, we study DR in MRI in order to determine the compatibility of MRI multicoil imaging with non-coaxial cable signal transmission. Since raw signal data are routinely discarded, we have developed an improved method for estimating the DR of MRI signals from conventional magnitude images. Our results indicate that the DR of typical surface coil signals at 3 T for human subjects is less than 88 dB, even for three-dimensional acquisition protocols. Cardiac and spine coil arrays had a maximum DR of less than 75 dB and head coil arrays less than 88 dB. The DR derived from magnitude images is in good agreement with that measured from raw data. The results suggest that current analog fiber optic links, with a spurious-free DR of 60–70 dB at 500 kHz bandwidth, are not by themselves adequate for transmitting MRI data from volume or array coils with DR 90 dB. However, combining analog links with signal compression might make non-coaxial cable signal transmission viable.     

谐波分量提高动态光谱法无创血液成分检测精度

为增加动态光谱数据的信噪比,提高预测模型稳定性和预测精度,提出将多次谐波分量计入动态光谱数据频域数据处理的改进方法。对110名志愿者进行临床采集,依据其脉搏波信号质量和谐波分布状况,确定其中60例样本为研究对象。在提取样本动态光谱时,以是否加入谐波分量为标准分成实验组和对照组。分别建立两组动态光谱和人体血红蛋白含量的BP神经网络模型,结果显示实验组预测集相关系数为0.91,远大于对照组预测集相关系数0.80,其余各项指标均有明显改善。实验证明利用谐波分量可提高动态光谱数据信噪比,有利于推动基于动态光谱的无创血液成分检测技术的进一步发展。     

Resolution and sensitivity aspects of ultrafast J-resolved 2D NMR spectra

Recent ultrafast techniques enable nD NMR spectra to be obtained in a single scan. However, resolution enhancement in the ultrafast domain leads to important sensitivity losses and lineshape distortions. In order to understand better resolution and spatial encoding aspects of continuous phase-encoding schemes, a theoretical and experimental comparison of different excitation patterns is carried out. Molecular diffusion appears to be the main cause of signal-to-noise ratio decrease, and a multi-echo excitation scheme is proposed to limit its effects when a good resolution is needed. Results obtained on 2D J-resolved spectra are presented.