Investigation on crosslinking behaviors of NBR/PVC filled with anhydrous copper sulfate particles by dynamic mechanical analysis

Crosslinking behaviors of acrylonitrile butadiene rubber (NBR)/poly (vinyl chloride) (PVC) alloy, filled with anhydrous copper sulfate (CuSO₄) particles, were investigated for the first time by dynamic mechanical analysis (DMA) under hetero and isothermal modes, respectively. In the heterothermal testing, (NBR/PVC)/CuSO₄ compound showed two marked increases in the storage modulus (E′), corresponding to coordination crosslinking of NBR-CuSO₄ and self-crosslinking of NBR and PVC respectively. During the isothermal testing, a dramatic increase in E′ was found at the initial stage while that of original NBR/PVC alloy was not detected. The marked increase in E′ of (NBR/PVC)/CuSO₄ compound was mainly due to the crosslinking induced by coordination between  CN and Cu²⁺. The increasing extent of E′ increased with the rise of CuSO₄ content, suggesting the formation of a greater number of crosslinks. Moreover, the activation energy (E_a) of crosslinking process was about 139 kJ/mol. In this work, fourier transform infrared spectrum (FT-IR) and equilibrium swelling method were also performed for the characterization of the compound. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 41–51, 2007     

Catalysis by Ir(III), Rh(III) and Pd(II) metal ions in the oxidation of organic compounds with H2O2

Catalytic activities of three transition metals, as iridium (III) chloride, rhodium (III) chloride and palladium (II) chloride, were compared in the oxidation of six aromatic aldehydes (benzaldehyde, p‐chloro benzaldehyde, p‐nitro benzaldehyde, m‐nitro benzaldehyde, p‐methoxy benzaldehyde and cinnamaldehyde), two hydrocarbons (viz. (anthracene and phenanthrene)) and one aromatic and one cyclic alcohol (cyclohexanol and benzyl alcohol) by 50% H₂O₂. The presence of traces (substrate: catalyst ratio equal to 1:62500 to 1:1961) of the chlorides of iridium(III), rhodium(III) and palladium(II) catalyze these oxidations, resulting in good to excellent yields. It was observed that in most of the cases palladium(II) chloride is the most efficient catalyst. Conditions for the highest and most economical yields were obtained. Deviation from the optimum conditions decreases the yields. Oxidation in aromatic aldehydes is selective at the aldehydeic group only and other groups remain unaffected. This new, simple and economical method, which is environmentally safe, also requires less time. Reactive species of catalysts, existing in the reaction mixture are also discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Estimating tail probabilities of heavy tailed distributions with asymptotically zero relative error

Efficient estimation of tail probabilities involving heavy tailed random variables is amongst the most challenging problems in Monte-Carlo simulation. In the last few years, applied probabilists have achieved considerable success in developing efficient algorithms for some such simple but fundamental tail probabilities. Usually, unbiased importance sampling estimators of such tail probabilities are developed and it is proved that these estimators are asymptotically efficient or even possess the desirable bounded relative error property. In this paper, as an illustration, we consider a simple tail probability involving geometric sums of heavy tailed random variables. This is useful in estimating the probability of large delays in M/G/1 queues. In this setting we develop an unbiased estimator whose relative error decreases to zero asymptotically. The key idea is to decompose the probability of interest into a known dominant component and an unknown small component. Simulation then focuses on estimating the latter ‘residual’ probability. Here we show that the existing conditioning methods or importance sampling methods are not effective in estimating the residual probability while an appropriate combination of the two estimates it with bounded relative error. As a further illustration of the proposed ideas, we apply them to develop an estimator for the probability of large delays in stochastic activity networks that has an asymptotically zero relative error.      

重稀土高氯酸盐甲基苯甲酰甲基亚砜配合物的合成及Tb3+的发光

合成了重稀土高氯酸盐甲基苯甲酰甲基亚砜配合物RE(ClO4)3·L5·C2H5OH(RE=Gd,Tb,Dy,Tm,Yb;L=C6H5COCH2SOCH3).经元素分析、稀土络合滴定、摩尔电导及热重分析确定了配合物的组成,测定了配体及配合物的IR谱、1H NMR及铽配合物的磷光光谱、荧光激发和发射光谱,根据荧光发射光谱数据计算了铽配合物的各能级值.     

纳米晶ZrO2:Er3+-Yb3+的制备及其室温上转换发射

用化学共沉淀法制备了ZrO₂:Er³⁺-Yb³⁺纳米晶粉体，所制备的纳米晶粉体具有较强的室温上转换发射和红外发射.研究了样品的晶体结构和上转换发光性质随着Yb³⁺掺杂浓度和煅烧温度的变化关系.通过X射线衍射谱分析发现，经800℃煅烧2h后得到的ZrO₂:Er³⁺-Yb³⁺纳米晶是四方相和单斜相的混合结构，经950℃煅烧2h后得到的样品以单斜相为主，随着Y     

稀土氟化物Y0.97Er0.03F3纳米材料的制备及上转换发光

通过燃烧法和控温热反应法制备了稀土氟化物纳米材料，利用XRD和TEM对样品进行了分析和表征。测量了发射波长为980nm激光二极管激发下所得纳米材料的上转换发光性质。     

Reactions of mercury salts with benzo- and tetrafluorobenzobarrelenes

Regiochemistry and stereochemistry of the addition of mercury salts to benzobarrelene and tetrafluorobenzobarrelene have been studied in acetic acid and methanol. The effect of the substrate structure on the regiochemistry of the reaction is discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1105–1108, June, 1994.     

Metallic radii of nonmetals

Experimental data are used to determine the atomic volumes and radii of the elements of subgroups IV–VIIA in the structures of metallic phases at high pressures. Metallic radii of nonmetals are compared with values based on Pauling and Goldschmidt calculations.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 220–222, February, 1994.     

A thermoanalytical study of the formation and activation of novel copper-carbon catalysts

Simultaneous DSC-TG and DTA-TG were used to investigate the calatytic effect of the metal on the thermal decomposition of a cellulose matrix containing small copper particles. The techniques were also used to demonstrate the effect of the metal particles on the subsequent activation of the carbon matrix, a process which develops the pore structure necessary to expose the metal particles to the gas phase. Temperature programmed desorption was used to study the initial mass loss found on activation. To quantify the catalytic effect of the copper particles on the activation process an estimate was made of the activation energy of the catalysed and uncatalysed reactions. The work gives valuable information on the processes involved in the preparation of a new range of metal-carbon catalysts. In celebration of the 60^th birthday of Dr. Andrew K. Galwey     

Initiation process of L‐lactide polymerization carried out with zirconium(IV) acetylacetonate

Lactide polymerization using zirconium(IV) acetylacetonate [Zr(acac)₄] as an initiator was investigated. In the reaction between Zr(acac)₄ and the monomer molecule, lactide deprotonation and the release of acetylacetone occurred. The structures of the obtained complexes were analyzed with high‐resolution NMR spectroscopy. A computational method was used to calculate the hypothetical structures. The role of the obtained complexes in the initiation of polymerization and the reaction of chain growth was proposed. The influence of the reaction temperature on the structures of the complexes was investigated. Polylactide chain growth proceeded by an insertion‐coordination mechanism. The polymer chain grew on one ligand, which was formed in advance from a deprotonated lactide. The molecular masses of the obtained polymers were the same as the theoretical masses and were directly proportional to the reaction conversion. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1886–1900, 2004