Speciation Analysis of Inorganic Tin (Sn(II)/Sn(IV)) by Graphite Furnace Atomic Absorption Spectrometry Following Ion-Exchange Separation

A new method based on anion exchange resin separation and graphite furnace atomic absorption spectrometry (GFAAS) detection is proposed for the determination of inorganic tin species. The result showed that Sn(IV) was quantitatively retained on the resin when [HCl] = 9.0 mol · L⁻¹, but Sn(II) could not be adsorbed on the resin under the same condition. Thus, a separation of Sn(II) and Sn(IV) has been realized. When the concentration of NaOH solution was between 2.0–7.0 mol · L⁻¹, Sn(IV) that adsorbed on the resin could be eluated from the resin completely. Meanwhile, under the atmosphere and the nitrogen states, the translation between Sn(II) and Sn(IV) was investigated. Under the optimal conditions, the detection limit of Sn(IV) is 0.40 μg · L⁻¹ with RSD of 2.3% (n = 5, c = 2.0 μg · L⁻¹). The proposed method was applied to the speciation analysis of tin in different water samples and the recovery of total Sn was in the range of 98.7–101.7%. In order to verify the accuracy of the method, a certified reference water sample was analyzed and the results obtained were in good agreement with the certified value.     

Synthesis and characterization of isotopically enriched methylmercury (CH3201Hg+)

A simple procedure for the synthesis of an important standard, isotopically enriched methylmercury, which is not commercially available, has been established successfully. The isotopically enriched standard synthesized is utilized in conventional isotope dilution mass spectrometry (IDMS), as well as in speciated IDMS (SIDMS), for determination of the true concentration of methylmercury in environmental samples. The CH₃²⁰¹Hg⁺ standard has been synthesized from commercially available ²⁰¹HgO and tetramethyltin. The synthesis time required is 1 h at 60°C. The product is highly pure, yielding more than 90% as ²⁰¹Hg in CH₃²⁰¹Hg⁺. Hazardous dimethylmercury does not occur during this synthesis procedure. The product synthesized was analyzed using high‐performance liquid chromatography coupled with inductively coupled plasma mass spectrometry (ICP‐MS) and ICP‐MS alone in order to determine its concentration, isotopic composition and purity. The stability of the product was also evaluated for over 6 months and found to be stable at 4°C in the dark. The isotopically enriched methylmercury synthesized can be used in SIDMS and IDMS analyses as a standard. Copyright © 2003 John Wiley & Sons, Ltd.     

Characterization of Metallo Bis(terpyridine) Diblock Polymers by Nonaqueous Capillary Zone Electrophoresis

A method of nonaqueous capillary zone electrophoresis (CZE) has been developed to characterize block (co)polymers of poly(ethylene oxide) and poly(styrene) containing metallo bis(terpyridine) complexes as bridging units. Specific CZE separation conditions had to be applied, with barium perchlorate dissolved in N-methylformamide (NMF) as background electrolyte and OV-1701-OH deactivated capillaries. For detection UV absorption was measured at a wavelength of 316 nm. Metallo diblock polymers with molecular weights up to 30,000 Da could be analyzed by the proposed nonaqueous CZE method. Experiments performed with polymeric compounds containing Fe, Ni or Ru as central metal ions showed that their electrophoretic mobilities were independent of the type of metal ion. Therefore, the data on the size of the polymeric compounds could be obtained using just one set of calibration standards. Polydispersities of the samples calculated from the experimental results were in correlation with the polydispersities of the polymers used in the synthesis of the metallo diblock polymers. Several polymeric samples contained metallo mono(terpyridine) complexes as impurities. These by-products could be separated from the main product. With symmetrical diblock polymers only one by-product was detected, while with an asymmetric diblock polymer two types of mono-complexes were found. The amount of the mono-complexes present as impurities was dependent on the type of central metal ion (Ni > Fe >> Ru).     

The Investigation of Bulk and Surface Polariton Modes in Ga1?xNxAs by Using Infrared Magneto Spectroscopy

We present and discuss infrared magnetoplasma reflectivity and surface polariton modes in Ga_1–xN_xAs. It assumed that the sample is characterized by a magnetoplasma dielectric tensor. Surface polariton dispersion for two component magnetoplasma was calculated from reflectivity spectra data. We detect transverse optic phonon of GaN sublattice in 470 cm^-1. The origin of sharp feature in p-polarization reflectivity about 300 cm^–1 as well as LO phonon frequency of GaAs sublattice is due to Brewster mode. An interesting feature of surface modes in Voigt geometry is nonreciprocalicity, which means that the frequency changes when the direction of propagation is reversed. Also, the infrared magnetoplasma reflectivity of GaNAs should be providing determination of the electrons and heavy holes effective mass and carrier's concentration.     

The prediction of coal properties using compressed infrared data from osculating polynomials

Reduction of the representation of infrared spectra from coal samples by osculating polynomials of degree nine is discussed. The reduced representation contains polynomial coefficients of order zero to four. Mathematical models of the original spectra are obtained by linear combination of the coefficients. These compressed models are statistically correlated to coal properties, namely, volatile matter, fixed carbon, ash content, heating value, hydrogen, carbon, sulphur, nitrogen, and maximum vitrinite reflectance, and the results are compared with those previously obtained from second derivatives of the same spectra. The use of compressed data, while giving slightly better correlations for some of the properties, has the advantage of requiring less computational time.     

Kinetic features of ethylene polymerization over supported catalysts [2,6‐bis(imino)pyridyl iron dichloride/magnesium dichloride] with AlR3 as an activator

The effects of polymerization temperature, polymerization time, ethylene and hydrogen concentration, and effect of comonomers (hexene‐1, propylene) on the activity of supported catalyst of composition LFeCl₂/MgCl₂‐Al(i‐Bu)₃ (L = 2,6‐bis[1‐(2,6‐dimethylphenylimino)ethyl] pyridyl) and polymer characteristics (molecular weight (MW), molecular‐weight distribution (MWD), molecular structure) have been studied. Effective activation energy of ethylene polymerization over LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a value typical of supported Ziegler–Natta catalysts (11.9 kcal/mol). The polymerization reaction is of the first order with respect to monomer at the ethylene concentration >0.2 mol/L. Addition of small amounts of hydrogen (9–17%) significantly increases the activity; however, further increase in hydrogen concentration decreases the activity. The IRS and DSC analysis of PE indicates that catalyst LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a very low copolymerizing ability toward propylene and hexene‐1. MW and MWD of PE produced over these catalysts depend on the polymerization time, ethylene and hexene‐1 concentration. The activation effect of hydrogen and other kinetic features of ethylene polymerization over supported catalysts based on the Fe (II) complexes are discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5057–5066, 2007     

Two new asterosaponins from the starfish Asterias rubens: application of a cryogenic NMR probe head

We report two new asterosaponins from the Baltic starfish Asterias rubens along with their ¹H and ¹³C NMR data. The compounds were isolated after on‐flow liquid chromatography–NMR–mass spectrometry screening indicated that they had not been identified before. The one‐ and two‐dimensional NMR experiments used to elucidate the structures were recorded using a 5 mm cryogenic probe head. The advantages of cryogenic probes for this kind of examination in comparison with conventional probe heads are discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

High-Throughput Screening of Ten Microcystins and Nodularins, Cyanobacterial Peptide Hepatotoxins, by Reversed-Phase Liquid Chromatography-Electrospray Ionisation Mass Spectrometry

Liquid chromatography-electrospray ionisation mass spectrometry was evaluated in the high-throughput analysis of microcystins and nodularins, cyanobacterial peptide hepatotoxins. Extracts originating from cyanobacterial strains and field material were separated on a 30 mm × 4 mm I.D. Merck Purospher STAR RP-18e column using a rapid gradient of aqueous formic acid and acetonitrile, ionised by electrospray technique and analysed on a Micromass Quattro II triple-quadrupole mass spectrometer operated in the selected ion recording (SIR) mode. The total analysis time per sample was 2.8 min corresponding to 514 samples a day. The system showed good robustness during a series of 320 repetitive injections of a field sample containing three major microcystins.     

Scalar and axial-vector mesons

Almost thirty years ago, Penny G. Estabrooks asked “Where and what are the scalar mesons?” (P. Estabrooks, Phys. Rev. D 19, 2678 (1979)). The first part of her question can now be confidently responded (E. van Beveren et al., Z. Phys. C 30, 615 (1986)). However, with respect to the “What” many puzzles remain unanswered. Scalar and axial-vector mesons form part of a large family of mesons. Consequently, though it is useful to pay them some extra attention, there is no point in discussing them as isolated phenomena. The particularity of structures in the scattering of --basically-- pions and kaons with zero angular momentum is the absence of the centrifugal barrier, which allows us to “see” strong interactions at short distances. Experimentally observed differences and similarities between scalar and axial-vector mesons on the one hand, and other mesons on the other hand, are very instructive for further studies. Nowadays, there exists an abundance of theoretical approaches towards the mesonic spectrum, ranging from confinement models of all kinds, i.e., glueballs, and quark-antiquark, multiquark and hybrid configurations, to models in which only mesonic degrees of freedom are taken into account. Nature seems to come out somewhere in the middle, neither preferring pure bound states, nor effective meson-meson physics with only coupling constants and possibly form factors. As a matter of fact, apart from a few exceptions, like pions and kaons, Nature does not allow us to study mesonic bound states of any kind, which is equivalent to saying that such states do not really exist. Hence, instead of extrapolating from pions and kaons to the remainder of the meson family, it is more democratic to consider pions and kaons mesonic resonances that happen to come out below the lowest threshold for strong decay. Nevertheless, confinement is an important ingredient for understanding the many regularities observed in mesonic spectra. Therefore, excluding quark degrees of freedom is also not the most obvious way of describing mesons in general, and scalars and axial-vectors in particular.     

CCD光谱谱线标定方法研究

CCD作为光谱分析和测色仪器的光谱接收器件 ,光谱谱线定位受单色仪狭缝和CCD光敏元尺寸影响。提出采用最小二乘法做曲线拟合和质心法来确定光谱线在CCD上的精确定位 ,使光谱谱线的定位精度得到提高 ,并且不受CCD光敏元尺寸限制。实验结果表明 ,两种方法对光谱线的定位 ,具有重复性高 ,稳定性好等特点。在定位精度上 ,两者具有一致性。