Electrokinetic investigations of charged porous membranes

Asymmetric ultrafiltration membranes were prepared from fully aromatic polyamides differing in the diamine monomers of the polymeric backbone and from polysulfone. Nanofiltration membranes were made from polysulfone and polyethersulfone. The polysulfone as well as the polyethersulfone were chemically modified to change the surface charges of the membranes that were made from these polymers. This means neutral, positively as well as negatively charged membranes could be employed for the measurements. The surface properties of the membranes as a function of pH were determined by measuring the streaming potential in a perpendicular and horizontal mode. Applying proteins the values of the streaming potential changed depending on the original charges of the membranes as well as on the pH of the solution. The values shifted to either higher or lower absolute values. Thus, characterization of unused and used membranes can be carried out by electrokinetic measurements. This was also demonstrated using a membrane fitted out with invertase. The zeta potential of nanofiltration membranes, however, was only evaluated from the results obtained with the horizontally run cell.     

Preparation of nickel-mesoporous materials and their application to the hydrodechlorination of chlorinated organic compounds

Mesoporous materials have attracted considerable attention for use as a catalyst or a catalyst support due to their remarkable textural properties such as high surface area and large pore volume with a narrow pore size distribution. Many efforts have been made to design mesoporous materials for use in heterogeneous catalyst systems. Recent progress and results regarding the preparation of nickel-mesoporous materials and their application to the hydrodechlorination of chlorinated organic compounds were discussed in this review. Mesoporous materials were used as a support for nickel catalyst or a nickel-incorporated mesoporous catalytic material in this work. Two research areas were described and discussed in this review. One is the preparation of mesoporous alumina-supported nickel catalysts and their application to the hydrodechlorination of 1,2-dichloropropane and o-dichlorobenzene. The other is the preparation of mesoporous silica-supported nickel catalysts and their application to the hydrodechlorination of 1,1,2-trichloroethane and chlorobenzene.     

孔性氧化铝模板与一维纳米新材料的制备

纳米材料尤其是以碳纳米管有序阵列为代表的一维纳米阵列材料的重要价值,促进了人们对模板合成方法的研究。本文简要回顾和总结了近年来有关孔性氧化铝模板的制备及其应用的研究进展,结合我们实验室的部分相关研究工作,揭示了孔性氧化铝模板在合成与组装一维纳米新材料方面的重要作用,以进一步活跃和促进该重要领域的研究和发展。     

Determination of trace amounts of cadmium and copper by atomic absorption spectrometry after simultaneous extraction and preconcentration using a new water-soluble polyacrylic acid/alumina sorbent

An analytical method using alumina modified with water-soluble polyacrylic acid polymer for the simultaneous separation and preconcentration of trace Cu and Cd in a column system, and their determination by flame atomic absorption spectrometry was developed. The conditions for coating Al₂O₃ with polyacrylic acid were optimized, then the column was packed with 50 mg of this sorbent. Cd and Cu solution was passed through a glass column at pH 4.5, and elution was carried out with 5 mL of 0.05 M HCl at a flow rate of 1 mL min⁻¹. A sorption capacity of 10 mg Cu and 12 mg Cd was obtained for 1 g sorbent. The detection limit was calculated as 4.5 μg L⁻¹ for Cu and 1.54 μg L⁻¹ for Cd in the final solution. Enrichment factors of 300 for Cd and 400 for Cu were obtained.     

Electrochemical Immunoassay for Carbohydrate Antigen‐125 Based on Polythionine and Gold Hollow Microspheres Modified Glassy Carbon Electrodes

A new electrochemical immunosensor for the detection of carbohydrate antigen‐125 (CA125), a carcinoma antigen, was developed by immobilization CA125 antibody (anti‐CA125) on gold hollow microspheres and porous polythionine (PTH) modified glassy carbon electrodes (GCE). The gold hollow microspheres provided a biocompatible microenvironment for proteins, and greatly amplified the coverage of anti‐CA125 molecules on the electrode surface. The performance and factors influencing the immunosensor were investigated in detail. The detection is based on the current change before and after the antigen‐antibody interaction. Under optimal conditions, the amperometric changes were proportional to CA125 concentration ranging from 4.5 to 36.5 U/mL with a detection limit of 1.3 U/mL (at 3σ). The CA125 immunosensor exhibited good precision, high sensitivity, acceptable stability, accuracy and reproducibility. The as‐prepared immunosensors were used to analyze CA125 in human serum specimens. Analytical results suggest that the developed immunoassay has a promising alternative approach for detecting CA125 in the clinical diagnosis.     

模板法组装纳米有序阵列的研究进展

由金属、半导体、碳纳米管、聚苯胺等组成的纳米有序阵列体系,在能量存储或转换、传感等方面具有广阔的应用前景。模板法组装纳米有序阵列体系是以具有特定微孔结构的材料为模板,通过电化学沉积、溶胶-凝胶沉积和化学气相沉积等手段,让纳米单元在模板提供的受控环境中原位生成,形成纳米有序阵列体系。模板法具有可控性好、工艺简便、能耗低等优点。本文综述了模板法组装纳米有序阵列体系的研究进展,并对纳米有序阵列体系的应用前景作了展望。     

Creeping motion of an assemblage of composite spheres relative to a fluid

The sedimentation of a homogeneous distribution of spherical composite particles and the fluid flow through a bed of these particles are investigated theoretically. Each composite particle is composed of a spherical solid core and a surrounding porous shell. In the fluid-permeable porous shell, idealized hydrodynamic frictional segments are assumed to distribute uniformly. The effect of interactions among the particles is taken into explicit account by employing a fundamental cell-model representation which is known to provide good predictions for the motion of a swarm of nonporous spheres within a fluid. In the limit of a small Reynolds number, the Stokes and Brinkman equations are solved for the flow field in a unit cell, and the drag force exerted by the fluid on the particle is obtained in a closed form. For a distribution of composite spheres, the normalized mobility of the particles decreases or the particle interactions increase monotonically with a decrease in the permeability of their porous shells. The effect of particle interactions on the creeping motion of composite spheres relative to a fluid can be quite significant in some situations. In the limiting cases, the analytical solutions describing the drag force or mobility for a suspension of composite spheres reduce to those for suspensions of solid spheres and of porous spheres. The hydrodynamic behavior for composite spheres may be approximated by that for permeable spheres when the porous layer is sufficiently thick, depending on the permeability.     

Preparation and characterization of spherical polymer packings from polybutadiene for size-exclusion chromatography

Porous polymer spherical particles for column packings in nonaqueous size-exclusion chromatography (SEC) were prepared from 1,2-syndiotactic polybutadiene by suspension and evaporation method. The polymer microbeads obtained were crosslinked by radical reaction between 2-vinyl groups in polybutadiene with ultraviolet radiation, to render them insoluble. These microbeads have wider chromatographic separation width than polystyrene column packings. In addition, the polybutadiene microbeads did not show the excessive retention observed with commercial polystyrene columns for polycyclic aromatic compounds. Therefore, a close correlation between the elution volume and M, for polycyclic aromatic compounds was observed with polybutadiene microbeads columns.     

Hydrogen-induced metal-oxide interaction studied on noble metal model catalysts

Summary The effect of hydrogen reduction on the structure and catalytic properties of “thin film”and “inverse”model systems for supported metal catalysts is discussed. Thin film model catalysts were obtained by epitaxial growth of Pt and Rh nanoparticles on NaCl(001), which were coated with amorphous or crystalline supports of alumina, silica, titania, ceria and vanadia. Structural and morphological changes upon hydrogen reduction between 473 and 973 K were examined by high resolution electron microscopy. Metal-oxide interaction sets in at a specific reduction temperature and is characterized by an initial “wetting”stage, followed by alloy formation at increasing temperature, in the order VO_x< TiO_x< SiO₂< CeO_x< Al₂O₃. “Inverse”model systems were prepared by deposition of oxides on a metal substrate, e.g. VO_x/Rh and VO_x/Pd. Reduction of inverse systems at elevated temperature induces subsurface alloy formation. In contrast to common bimetallic surfaces, the stable subsurface alloys of V/Rh and V/Pd have a purely noble metal-terminated surface, with V positioned in near-surface layers. The uniform composition of the metallic surface layer excludes catalytic ensemble effects in favor of ligand effects. Activity and selectivity, e.g. for CO and CO₂methanation and for partial oxidation of ethene, are mainly controlled by the temperature of annealing or reduction. Reduction above 573 K turned out to be beneficial for the catalytic activity of the subsurface alloys, but not for the corresponding thin film systems which tend to deactivate viaparticle encapsulation.</o:p>     

Synthesis and Characterization of Titanium-doped Ordered Mesoporous Alumina

Titanium-doped ordered mesoporous alumina with specific structural properties has been prepared by the evaporation induced self-assembly sol-gel method. The results show that the doped titanium helps to stabilize the ordered mesoporous alumina material without influencing the ordered mesoporosity. The textural properties of the obtained sample are related to the amount of doped titanium. When the molar ratio of aluminum to titanium(n(Al)/n(Ti)) is controlled as 10.2, the titanium-doped ordered mesoporous alumina exhibits high surface area(up to 218 m2 g-1), large pore volume(0.42 cm3 g-1) and narrow pore diameter(6.1 nm) after treating at 900 ℃, showing high thermal stability. Moreover, the obtained sample calcined at 900 ℃ still maintains ordered mesoporous structure and exhibits high thermal stability.