POLYMER-SUPPORTED LEWIS ACID CATALYSTS. Ⅵ. POLYSTYRENE-BONDED STANNIC CHLORIDE CATALYST

A polystyrene-bonded stannic chloride catalyst was synthesized by the method of lithium polystyryl combined with stannic chloride. This catalyst is a polymeric organometallic compound containing 0.25 mmol Sn (Ⅳ)/g catalyst. The catalyst showed sufficient stability and catalytic activity in organic reaction such as esterification, acetalation and ketal formation, and it could be reused many times without losing its catalytic activity.     

氯化钪-氯化钠-氯化钾熔盐制备新工艺研究

研究了以Sc2O3为原料，盐酸回流溶解后与NaCl，KCl，NH4Cl溶液混合，经蒸发浓缩、结晶、真空预脱水，再在氩气保护下分段升温脱水、升华除去过量NI-hCl后制备ScCl3-NaCl-KCl熔盐的新工艺。研究表明，添加NH4Cl后加热脱水时，NH4Cl分解产生的HCl气体能抑制ScCl3水合物加热过程中的水解，溶解产生的水不溶性钪，从而有效地防止了Sc2O3等水不溶化合物的生成。制备的ScCl3-NaCl-KCl熔盐脱水完全、水不溶性钪含量很低，能满足熔盐金属热还原法制备金属钪及铝钪中间合金对熔盐原料的要求。     

Synthesis of o-carborane-C-carboxylates of certain natural terpene alcohols, sterols, phenols, and camphar oxime

Previously unreported esters 1b–20b were synthesized from natural terpene alcohols, sterols, plant phenols, and camphar oxime (1a–20a) by reaction with o-carborane-C-carboxylic acid chloride. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 434–436, September–October, 2006.     

三苄基氯化锡及其衍生物的合成

三苄基氯化锡最初用格氏法制得。Keiti等曾报道由锡和苄基氯直接制备,这时溶剂对反应的影响很大:用水作溶剂时得到三苄基锡;用甲苯作溶剂时得到二苄基二氯化锡;用正丁醇作溶剂时三苄基氯化锡的产率只有61％。在反应体系中加入KI、KBr或H_3PO_4等催化剂,三苄基氯化锡的产率也只有60％。本文用DMF作溶剂,AlCl_3-I_2作催化剂,并首次在反应体系中加入镁、锌、铝和钠等使副产物氯化亚锡还原成活性很高的金属锡,后者再与等基氯反应,可使三苄基氯化锡的产率提高到91.3％。文中还报导三种尚     

聚二乙基二烯丙基氯化铵的合成与表征

以二乙基二烯丙基氯化铵为原料采用过硫酸盐水溶液引发体系合成了聚二乙基二烯丙基氯化铵(PDEDAAC).探讨了单体、引发剂和助剂EDTA的浓度及温度对产物的特性粘数和单体转化率的影响,确定了适宜的工艺条件,并用元素分析、FT-IR和1H NMR对产物的结构进行了表征.结果表明,当单体浓度≥3.00 mol/L、引发剂浓度为0.015~0.020 mol/L、EDTA浓度为0.40~0.60 mmol/L、聚合反应温度为50~55℃、反应时间为6 h时,产物的特性粘数可达223 mL/g,单体转化率大于98.00%.     

钾镁氯化物(硫酸盐)与脲、水体系的溶度研究

报导了KCl-MgCl2-CO(NH2)2-H2O和K2SO4-MgSO4-CO（NH2）2-H2O两个四元体系在25℃时的溶度及其饱和溶液的折光率、密度，相应的溶度图和组成-折光率、组成-密度图．前一体系中形成3个三元化合物：MgCl2·4CO（NH2）2·2H2O、MgCl2·CO（NH2）2·4H2O和KCl·MgCl2·6H2O溶度盐份图由9支共饱线、4个四元无变点组成．四元体系的水量图、性质-组成图有类似的变化．后一体系中有2个异成份溶解化合物MgSO4·CO（NH2）2·2H2O和K2SO4·MgSO4·6H2O形成，溶度等温图由7支双饱溶度线、3个四元无变点组成．对两个体系相图的相似性和差异点进行了讨论．     

Carbonyl‐Komplexe von Chrom,Molybdän und Wolfram mit Isocyanacetat. Reaktionen am koordinierten Isocyanacetat. Stabilisierung von Isocyanessigsäure und Isocyanacetylchlorid am Metall. Isocyanopeptide [1]

Carbonyl Complexes of Chromium, Molybdenum and Tungsten with Isocyano Acetate. Reactions of Coordinated Isocyanoacetate. Stabilization of Isocyanoacetic Acid and Isocyanoacetyl Chloride at the Metal Atom. Isocyanopeptides The reactions of [(OC)₅MCNCH₂CO₂Et] (M = Cr, W) with Na[N(SiMe₃)₂] or with KOH afford the isocyanoacetate complexes [(OC)₅MCNCH₂CO₂]^? ( 1,2 ). Similarly, the complex [(OC)₃Mo(CNCH₂CO₂^?Li⁺)₃] ( 4 ) was obtained from [(OC)₃Mo(CNCH₂CO₂Et)₃] ( 3 ) and LiOH. Protonation of 1 and 2 affords the sublimable isocyanoacetic acid complexes [(OC)₅MCNCH₂CO₂H] ( 5 , 6 ; M = Cr, W) in which the functional isocyanide is stabilized at the metal atom. Reactions of [(OC)₅WCNCH₂CO₂^?K⁺] and of [(OC)₃Mo(CNCH₂CO₂^?Li⁺)₃] with oxalyl dichloride give the isocyanoacetyl chloride compounds [(OC)₅WCNCH₂COCl] ( 9 ) (sublimable) and [(OC)₃Mo(CNCH₂COCl)₃] ( 10 ); the latter ( 10 ) was not isolated. Complexes 9 and 10 were reacted in situ with β‐alanine, glycine, phenylalanine and methionine esters as well as the peptide esters GlyGlyOEt, PhePheOMe, Phe‐β‐AlaOMe, and GlyGlyGlyOMe to form the isocyanoacetyl amino acid esters ( 11 ‐ 14 ) and the isocyanoacetyl peptide esters ( 15 ‐ 18 ) which are stabilized at the molybdenum atom.     

Characterization and separation of Al13 species using gel-filtration chromatography

A polyaluminum chloride (PAC) sample was prepared using a slow alkaline titration method. The Bio-Gel P-100 gel column chromatographic technique was used to separate and characterize the various forms of aluminum present in the prepared PAC solution. The effluents from a gel column were monitored using online chemical method: Al-Ferron timed complexation spectrophotometry and by ²⁷Al nuclear magnetic resonance (NMR) spectroscopy. Effects of different experimental conditions such as eluent flow rate, ionic strength and pH on separation of Al₁₃ were investigated. Experimental results indicated that molecule size exclusion was not the only parameter affecting the column chromatographic separation efficiency of Al₁₃ but molecule charge as well. Reducing the eluent flow rate, increasing the ionic strength and suitable pH resulted in increase in the separation efficiency. Experimental results clearly indicated that by varying the experimental conditions, it is possible to produce pure Al₁₃ species using a gel column chromatographic technique.     

壳聚糖作用下一步法合成具有高电活性的AgCl@聚苯胺核壳结构

在壳聚糖的作用下，采用简单的一步法合成了具有星状结构的氯化银/聚苯胺核壳型复合材料。当壳聚糖的浓度为1%时，所制备的氯化银/聚苯胺复合材料具有高度的分散性，壳层厚度为30～80 nm、核的直径在25～60 nm范围内。通过透射电镜、红外光谱和X-射线衍射对样品的形态和组成进行了表征。循环伏安实验结果表明这种复合材料在中性条件下具有很好的电化学活性。     

Thermodynamic properties of lithium chloride ammonia complexes for application inahigh-lifthigh temperature chemical heat pump

Ammonia absorption by and desorption from lithium chloride at different pressures has been studied using high-pressure differential scanning calorimetry, for application in a high-lift high temperature chemical heat pump. The measurements were performed under isobaric as well as under isothermal circumstances. Clausius–Clapeyron plots were constructed and used to calculate the thermodynamic parameters and to determine the stability regions of the different complexes. Controversies in literature as to the real existing phases are resolved.