Hybrid Electrodes Used in Polymer Electro-Optic Modulator with Ultra-Broadband

Hybrid electrode combined coplanar waveguide (CPW) and microstrip lines in ultra-broadband electro-optic modulators. The characteristics of the modulators with hybrid electrode is like that of the modulator with the microstrip lines, in which the microstrip electrode is loaded above only one arm of Mach-Zehnder (M-Z) optical waveguide, besides the problem of microstrip line to coaxial transition and corona polarization in polymer modulators have been best solved at the same time. By using finite element method (FEM), the characteristic parameters such as half-wave voltage, modulation bandwidth characteristic impedance, effective microwave refractive index of polymer modulators with microstrip line and hybrid electrode are analysed and compared in this paper. The results present that velocity match, impendence match and lower microwave propagating loss is easily realized in modulators with hybrid electrode.     

Chemoselective tetrahydropyranylation of alcohols and phenols using polystyrene supported aluminium chloride as a catalyst

A simple, efficient and highly chemoselective method for tetrahydropyranylation of alcohols and phenols has been developed by their reaction with 3,4-dihydro-2H-pyran at room temperature in the presence of a catalytic amount of polystyrene supported AlCl₃. The method is also highly selective for monoprotection of symmetrical diols.     

Anisotropic and isotropic phases of polymer melts

The melting mechanism of polymer crystals is proposed. It is assumed that the melting happens due to forming supervacancies. This mechanism leads the appearance of anisotropic phase of a melt. It is shown that two phases—anisotropic and isotropic—can exist in polymer melts.     

Grafting onto poly(ethylene terephthalate) driven by 172 nm UV light

The reactivity of the surface of poly(ethylene terephthalate) (PET) film under 172 nm UV irradiation (xenon excimer lamp) towards nitrogen-borne 1-octene, n-nonane and heptafluorodecene vapor was investigated. Materials receiving from 0 to 24 J/cm² of UV were examined by X-ray photoelectron spectroscopy (XPS), time of flight secondary ion mass spectroscopy (ToF/SIMS), water and mineral oil contact angle measurement and atomic force microscopy (AFM). A uniform nanoscale layer developed on PET surface attributed to the grafting reaction between photolytically-produced polymer radicals and vapor phase molecules.     

Experimental design and the optimization of a polymer supported palladium complex for use in the Heck reaction

Optimization of the Heck reaction of 4-bromoacetophenone with styrene by a polymer supported, sulfur-containing palladacycle, varying 6 factors at a total of 28 different levels, corresponding to 5760 different possibilities was undertaken. Conversion improved from 34%, with large observable leaching to 88% with no leaching. This was accomplished using a Design of Experiments approach facilitated by the Statistical Design Package, MODDE 7.0^TM.     

Electrochemical Detection of As(III) via Iodine Electrogenerated at Platinum,Gold, Diamond or Carbon‐Based Electrodes

The reaction of iodine, electrogenerated from iodide, is used for the detection of As(III) via electrocatalytic reaction in the diffusion layer of a boron‐doped diamond electrode. The merits of this electrode material for this purpose (over platinum, gold or glassy carbon) are demonstrated and the kinetics of the reaction between I₂ and As(III) in acid reported.     

两段级联掺铒光纤放大器的优化研究

基于Giles模型,研究了980 nm和1480 nm泵浦的两段级联掺铒光纤放大器(EDFA)的设计,得出了掺铒光纤(EDF)的最佳长度和光隔离器的最佳位置随泵浦功率和信号功率的变化关系.比较980 nm和1480 nm泵浦的两段级联EDFA,可以发现,前者的最佳EDF长度短,而光隔离器最佳位置距EDFA输入端远.     

光纤放大器增益饱和对有源光纤环形腔滤波特性的影响

从理论和实验两个方面研究了有源光纤环形腔滤波器输入光功率对光纤放大器增益的影响及由此引起的对有源光纤环形腔滤波特性的影响。在考虑上述影响的情况下 ,对有源光纤环形腔滤波器参数的优化作了讨论     

Laser printing of nanocomposite solid-state electrolyte membranes for Li micro-batteries

The electrochemical and mechanical properties of nanocomposite solid-state electrolyte membranes deposited using a laser direct-write technique from a suspended solution comprised of an ionic liquid (1,2-dimethyl-3-n-butylimidazolium-bis-trifluoromethanesulfonylimide)-polymer (poly(vinylidene fluoride-co-hexafluoropropylene)) matrix with dispersed nano-particles (TiO₂) are reported and discussed. These laser printed nanocomposite solid-state membranes are shown to exhibit the proper electrochemical behavior for ionic liquids while maintaining the strength and flexibility of the polymer matrix. This combination of physical properties and deposition technique makes these deposited nanocomposite membranes ideally suited for use as an electrolyte/separator in Li micro-batteries. Sample Li micro-batteries using these laser printed nanocomposite membranes have been fabricated and their charge/discharge behavior tested, demonstrating the feasibility of using these nanocomposite membranes in Li micro-battery applications.     

Preparation and electrical characterization of (PVC + KBrO3) polymer electrolytes for solid state battery applications

This paper presents results of studies on dc electrical conductivity and transference number measurements on potassium bromate (KBrO₃) complexed polyvinyl chloride (PVC) films prepared by solution cast technique. Temperature dependence of dc electrical conductivity and transference number data indicated the dominance of ion type charge transport in these specimens. The magnitude of conductivity increased with increase in concentration of the salt and temperature. Using this (PVC + KBrO₃) electrolyte, solid-state electrochemical cells were fabricated, and their discharge profiles were studied under a constant load of 100 kΩ. Several cell profiles such as open circuit voltage, short circuit current, power density, and energy density associated with these cells were evaluated and were reported. The features of complexation of the electrolytes were studied by X-ray diffraction and Fourier transform infrared spectroscopy. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006