Strukturelle Untersuchungen einiger neutraler Komplexe des zweiwertigen Molybdäns

Unit cell parameters have been calculated from x-ray powder diffraction data of Mo₂Br₄ Py ₄ (A), Mo₂I₄ Py ₄ (B), Mo₂I₄ Pic ₄ (C), Mo₂(SCN)₄ Py ₄ (D) and Mo₂(SCN)₄ Pic ₄ (E), A, B and C crystallize tetragonal. A witha=9,4₂,c=15,O₂ Å; B witha=9,4₆,c=14,9₈ Å and C witha=9,6₆ andc=15,7₂ Å D and E crystallize orthorhombic. D witha=10,0₉,b=9,1₄,c=15,0₈ Å; E witha=10,2₂,b=9,4₁ andc=15,1₅ Å.Py=pyridine,Pic=4-methylpyridine.

     

Mechanical properties of single motor molecules studied by three-dimensional thermal force probing in optical tweezers.

A new method combining three-dimensional (3D) force measurements in an optical trap with the analysis of thermally induced (Brownian) position fluctuations of a trapped probe was used to investigate the mechanical properties of a single molecule, the molecular motor kinesin. One kinesin molecule attached to the probe was bound in a rigorlike state to one microtubule. The optical trap was kept weak to measure the thermal forces acting on the probe, which were mainly counterbalanced by the kinesin tether. The stiffness of kinesin during stretching and compression with respect to its backbone axis were measured. Our results indicate that a section of kinesin close to the motor domain is the dominating element in the flexibility of the motor structure. The experiments demonstrate the power of 3D thermal fluctuation analysis to characterize mechanical properties of individual motor proteins and indicate its usefulness to study single molecule in general     

Synthesis and spectroscopic studies of methoxy-substituted phenylthienylnicotinamidines

Abstract

Five thienylnicotinamidine derivatives 5a–e were prepared from their corresponding nicotinonitriles 3a–e on treatment with lithium trimethylsilylamide [LiN(TMS)₂] followed by hydrolysis using ethanolic/HCl (gas). The nicotinonitriles 3a–e were prepared via Suzuki coupling reaction of bromothienyl derivative 1 with the appropriate phenylboronic acids 2a–e. The DFT calculation was used to optimize the geometric structure of the newly synthesized nicotinamidines. The comparison of DFT/B3LYP calculated spectral data (¹H-NMR and ¹³C-NMR) with the experimental data showed acceptable agreement. Mass fragmentation patterns of 3,4-dimethoxyphenyl, 3,5-dimethoxyphenyl, and 3,4,5-trimethoxyphenyl thienylnicotinamidine derivatives were investigated.     

Compatibility Studies of Multicomponent Tablet Formulations. DSC and experimental mixture design

An experimental mixture design was applied to a differential scanning calorimetry (DSC) study performed to evaluate naproxen compatibility in tablet formulations consisting of four classic excipients (sorbitol, sodium carboxymethylcellulose, poly(ethylene glycol) 20000 and Veegum) each in adequate concentration ranges accounting for the relevant values actually used in pharmaceutical formulations. Twenty-seven different tablets were obtained from as many mixtures prepared according to the experimental design plan and analyzed in a random order by DSC. Statistical evaluation of experimental data enabled correlation of both enthalpy and onset temperature variations of drug melting endotherm (selected as responses indicative of the presence of drug-excipient interactions) with the mixture composition. Variance analysis (Anova) confirmed the reliability of the postulated polynomial model in providing adequate prediction of true system behaviour. This revised version was published online in August 2006 with corrections to the Cover Date.     

Dielectric studies under high pressure on strongly polar liquid crystals exhibiting monolayer smectic A phase

Dielectric studies have been performed at elevated pressures on two compounds of a homologous series possessing a strongly polar terminal group and three phenyl rings in their molecular structure. This is the first high pressure dielectric study on such systems that exhibit a monolayer smectic A phase. Also notable is the fact that these compounds show a dual frequency response, a promising feature for fast liquid crystal display devices. The low frequency relaxation recorded in the nematic and smectic A phases is attributed to the reorientation of the molecules about the short axis. The temperature and pressure dependence of the relaxation frequency of this mode as well as the involved activation parameters are discussed. At a given relative temperature the relaxation frequency decreases as the pressure is increased. However, the parameter that characterizes the temperature dependences of the relaxation frequency, viz., the activation enthalpy, has a very weak dependence on pressure. In contrast, the activation volume shows a linear decrease with temperature.     

The chemistry of fluorine containing phosphaalkenes, arsaalkenes and selenocarbonyls

This review covers our extensive research activities in the area of fluorine containing phospha- and arsaalkenes as well as selenocarbonyls, which differ considerably in their properties and reactivities from their alkyl and aryl counterparts and thus contribute in a gratifying manner to the still growing field of unsaturated element-carbon compounds of 3rd and 4th row main group elements E. Of particular interest is the influence of the fluorine substituents and other small groups (OR, NR₂) with either inductive and/or mesomeric effects on the polarity and reactivity of the EC bond. Addition reactions of proton acidic and hydridic polar HX reactants as well as [2+2], [3+2] and [4+2] cycloadditions have been thoroughly studied. The results obtained allow a classification of the EC systems within five different types, A to E, and prove a change from “normal” to “inverse” heteroalkenes in this sequence. The ligand properties of some derivatives have also been investigated in some detail.     

Theoretical study of p‐methacryloyl‐aminophenylarsonic acid

Conformations of p‐methacryloylaminophenylarsonic acid (p‐MAPHA) are determined through molecular mechanics and DFT/B3LYP calculations. Solvation effects are studied within the self‐consistent isodensity continuum model (SCI‐PCM). The stationary points were found to correspond to minima as verified by the analysis of vibrational frequencies in the molecule. The molecular optical absorption was obtained by using different solvent environments. The present results are in good agreement with the available experimental data. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Development and validation of a stability-indicating HPLC method for the determination of degradation products in dipyridamole injection

Summary The development and subsequent validation of an isocratic high-performance liquid chromatographic (HPLC) procedure employing ultraviolet (UV) detection for the determination of degradation products in Dipyridamole Injection is reported. The development of this assay involved the evaluation of several factors including buffer type, ionic strength, pH, organic composition, and column type. The described method is simple, reproducible, accurate, and selective. The precision, relative standard deviation (RSD), amongst five sample preparations for total degradation products was not more than (NMT) 10.2 %, while the individual degradation products were NMT 12.1%. Intermediate precision, as determined from fifteen sample preparations, generated by two Analysts on different HPLC systems over three days, exhibited an RSD for total and individual degradation products of 8.2 % and NMT 27.5 %, respectively. The mean absolute recovery of dipyridamole using the described method is 102.1±1. 9%, (mean±SD, n=12) over the concentration range of 0.03 % to 5.0 % of its label claim of 5 mg mL⁻¹. The limit of detection and limit of quantitation were 0.1 and 0.3 μg mL⁻¹, respectively. The linearity of the peak response was verified with respect to dipyridamole concentration over a range of 0.3 and 50 μg mL⁻¹ (0.03 % to 5.0 % label claim). The Standard and Assay Preparations are stable for up to 48 hours at room temperature. The selectivity was evaluated by subjecting the finished product (Dipyridamole Injection) to thermal, acidic, basic, oxidative and fluorescent radiation stress conditions. No interference in the analysis of degradation products was observed, showing the method is stability-indicating.     

Synthesis and structural characterization of carbon-centered tris(pentafluorophenyl)silyl derivatives

A general method for the synthesis of carbon-centered tris(pentafluorophenyl)silyl derivatives (RSi(C₆F₅)₃) by reaction of trichlorosilanes (RSiCl₃) with pentafluorophenylmagnesium bromide was described. The crystal structures of obtained compounds were studied by X-ray diffraction analysis (7 structures). The peculiarities of crystal packing were analyzed by means of DFT calculations.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.