二硫化钼基复合材料的合成及光催化降解与产氢特性

随着环境污染和能源短缺的加剧,无污染环境修复技术及清洁能源替代工程已成为一项重要而紧迫的任务。作为层状结构的过渡金属硫化物,二硫化钼带隙较窄,边缘具有高的反应活性,容易与其他物质形成复合结构,是近年来光催化环境修复及清洁能源领域的研究热点。本文详细介绍了半导体二硫化钼及其复合物的合成方法和光催化降解与产氢行为,重点阐述了二硫化钼及其复合物的具体复合方式、光催化降解污染物活性、光催化产氢活性以及具体的降解与产氢机理等方面的内容,并举例说明。二硫化钼及其复合物在光催化降解污染物和光催化产氢方面具有绿色、廉价、高效等优点,在环境修复及清洁能源领域具有巨大的潜力和应用发展前景。     

Interaction between peroxide ion and phenol group which are coordinated to the same iron(III) ion

We have prepared several new iron(III) complexes with ligands which contain a phenol group; these are tetradentate [(X-phpy)H, X and H(phpy) represent the substituents on the phenol ring and N,N-bis(2-pyridylmethyl)-N-(2-hydroxybenzyl)amine, respectively] and pentadentate ligands [(R-enph-X)H; R=ethyl(Et) or methyl(Me) derivative and H(Me-enph) denotes N,N-bis(2-pyridylmethyl)-N″-methyl-N″-(2″-hydroxyl-benzylamine)ethylenediamine] and have determined the crystal structures of Fe(phpy)Cl₂, Fe(5-NO₂-phpy)Cl₂, and Fe(Me-enph)ClPF₆, which are of a mononuclear six-coordinate iron(III) complex with coordination of one or two chloride ion(s). These compounds are highly colored (dark violet) due to the coordination of phenol group to an iron(III) atom. When hydrogen peroxide was added to the solution of the iron(III) complex, a color change occurs with bleaching of the violet color, indicating that oxidative degradation of the phenol moiety occurred in the ligand system. The bleaching of the violet color was also observed by the addition of t-butylhydroperoxide. The rate of the disappearance of the violet color is highly dependent on the substituent on the phenol ring; introduction of an electron-withdrawing group in the phenol ring decreases the rate of bleaching, suggesting that disappearance of the violet band should be due to a chemical reaction between the phenol group and a peroxide adduct of the iron(III) species with an η¹-coordination mode and that in this reaction the peroxide adduct acts as an electrophile towards phenol ring. The intramolecular interaction between the phenol moiety and an iron(III)-peroxide adduct may induce activation of the peroxide ion, and this was supported by several facts that the solution containing an iron(III) complex and hydrogen peroxide exhibits high activities for degradation of nucleosides and albumin.     

Correlation of antioxidant depletion and mechanical performance during thermal degradation of an HTPB elastomer

Thermal degradation studies of a stabilized HTPB based elastomer were conducted at temperatures from 50 °C to 110 °C. The concentration of extractable antioxidant (AO2246) in the polymer was quantified via AO extraction and a gas chromatography-based method using internal standards. The decrease in extractable AO levels as a function of time and temperature was evaluated and correlated with mechanical property changes. Most importantly, AO depletion features were found to be temperature dependent. At elevated temperatures (>80 °C) extractable AO levels decreased rapidly and faster than the concurrent loss in mechanical properties. While extractable AO concentrations decrease quickly, the material is able to maintain some useful mechanical properties, perhaps via non-extractable or grafted AO species formed during degradation providing additional protection. At lower aging temperatures extractable or free AO levels decreased more slowly than the mechanical properties. Therefore, for condition monitoring purposes a universal correlation between AO levels and aging state or material condition could not be established. Most importantly, however, loss of mechanical properties and oxidative degradation is observed at lower temperatures despite significant levels of free antioxidant in the material. The antioxidant appears to be limited in its effectiveness to completely prevent degradation reactions, or only fractions of the total AO available are actually involved in the inhibition process.     

Determination of airborne isocyanates as di-n-butylamine derivatives using liquid chromatography and tandem mass spectrometry

A method for the determination of isocyanates as di-n-butyl amine (DBA) derivatives using tandem mass spectrometry (MS/MS) and electrospray ionisation (ESI) is presented. Multiple-reaction monitoring (MRM) of the protonated molecular ions and corresponding deuterium-labelled d₉-DBA derivatives resulted in selective quantifications with correlation coefficients >0.998 for the DBA derivatives of isocyanic acid (ICA), methyl isocyanate (MIC), ethyl isocyanate (EIC), propyl isocyanate (PIC), phenyl isocyanate (PhI), 1,6-hexamethylene diisocyanate (HDI), 2,4-, 2,6-toluene diisocyanate (TDI), isophorone diisocyanate (IPDI), 4,4′-methylenediphenyl diisocyanate (MDI), 3-ring MDI, 4-ring MDI, HDI-isocyanurate, HDI-diisocyanurate, HDI-biuret and HDI-dibiuret. The instrumental precision for 10 repeated injections of a solution containing 0.1 μg ml⁻¹ of the studied derivatives was <2%. Performing MRM of the product ion [DBA + H]⁺ (m/z = 130) from the protonated molecular ion resulted in the lowest detection limits, down to 10 amol (for TDI). Quantification of concentrations below 10⁻⁶ of the occupational exposure limit (OEL) for TDI during 10 min of air sampling was made possible. In an effort to control the formation of alkali adducts, addition of lithium acetate to the mobile phase and monitoring of lithium adducts was evaluated. Having lithium present in the mobile phase resulted in complete domination of [M + Li]⁺ adducts, but detection limits for the studied compounds were not improved. Different deuterium-labelled derivatives as internal standards were evaluated. (1) DBA derivatives of deuterium-labelled isocyanates (d₄-HDI, d₃-2,4-TDI, d₃-2,6-TDI and d₂-MDI), (2) d₉-DBA derivatives of the corresponding isocyanates and (3) d₁₈-DBA derivatives of the corresponding isocyanates. An increase in number of deuterium in the molecule of the internal standard resulted in an increase in instrumental precision and a decrease in correlation within calibration series.     

The morphological effects upon enzymatic degradation of poly(butylene succinate-co-butylene terephthalate)s (PBST)

In this work, the enzymatic degradation of poly(butylene succinate-co-butylene terephthalate) (PBST) copolyesters was studied using the lipase from Pseudomonas (Lipase PS^®). The biodegradation behavior was found to strongly depend on the overall impacts of several important factors as the BT comonomer structure and molar content, thermal characteristics, morphology, the enzyme-substrate, and so forth. Further, the biodegraded residual film samples were allowed to be analyzed by means of gel permeation chromatography (GPC), proton nuclear magnetic resonance (¹H NMR), differential scanning calorimeter (DSC), small angle X-ray scattering (SAXS), and scanning electron microscope (SEM). On the experimental evidences, an exo-type mechanism of enzymatic chain hydrolysis preferentially occurring in the amorphous region was suggested for the PBST film samples.     

Effects of processing parameters on the mechanical properties of polypropylene random copolymer

The mechanical properties of polypropylene random copolymer (PP-R) with different processing parameters were studied. Special attention is devoted to the investigation of the influence of masterbatch addition on the variation in the mechanical properties of injection moulded PP-R. Tensile, instrumented Charpy impact, Shore D hardness, differential scanning calorimeter (DSC) and Vicat softening temperature (VST) tests were conducted on the test samples containing different colour masterbatches varying from 0.5 to 10 wt%. The observed changes in the mechanical behaviour are explained by the type and level of masterbatch content. The natural UV weathering performance of the PP-R material was studied from the masterbatch type point of view. The effect of processing parameters on material performance was studied on samples which were directly obtained from extruded pipes and on injection moulded samples.

Finally, the effects of storage time on the polymer properties were investigated.     

Degradation thermique et etude vibrationnelle de MII(NH4)4(P3O9)2x4H2O(M II=Cu2+, Ni2+, Co2+)

We have studied the thermal behaviour under atmospheric pressure of isotypic tetrahydrate cyclotriphosphates M^II(NH₄)₄(P₃O₉)₂x4H₂O (M ^II=Cu, Ni and Co), between 25 and 1400°C, by X-ray diffraction, thermal analyses (TG and DTA) and infrared spectrometry. This study shows that the series of the compounds M^II(NH₄)₄(P₃O₉)₂x4H₂O (M ^II=Cu, Ni and Co) after elimination of water, in two different stages, and ammonia leads, at 400°C to cyclotetraphosphate M₂ ^IIP₄O₁₂ crystallized and to a thermal residue with a formula H₄P₄O₁₂ which undergoes under a thermal degradation by evolving water and pentoxide phosphorus. The kinetic characteristics of the dehydration and elimination of ammonia have been determinated. The vibrational spectra of Cu(NH₄)₄(P₃O₉)₂x4H₂O were examined and interpreted, in the domain of the valency frequencies, on the basis of the crystalline structure of its isotypic compound Co(NH₄)₄(P₃O₉)₂x4H₂O whose cycle has the site symmetry C₁, of our results of the calculation of the IR frequencies and the successive isotopic substitutions of the equivalent atoms (3P, 3Oi and 6Oe belonging to the P₃Oi₃Oe₆ ring) of the P₃O₉ ³⁻ cycle with high symmetry D_3h. This revised version was published online in August 2006 with corrections to the Cover Date.     

Photocatalytic degradation of sulfadiazine in suspensions of TiO2 nanosheets with exposed (001) facets

Antibiotics such as sulfonamides are widely used in agriculture as growth promoters and medicine in treatment of infectious diseases. However, the release of these antibiotics has caused serious environmental problems. In this paper, photocatalytic oxidation technology was used to degrade sulfadiazine (SDZ), one of the typical sulfonamides antibiotics, in UV illuminated TiO₂ suspensions. It was found that TiO₂ nanosheets (TiO₂-NSs) with exposed (001) facets exhibit much higher photoreactivity towards SDZ degradation compared to TiO₂ nanoparticles (TiO₂-NPs) with a rate constant increases from 0.017 min⁻¹ to 0.035 min⁻¹, improving by a factor of 2.1. Under the attacking of reactive oxygen species (ROSs) such as superoxide radicals (O₂^–) and hydroxyl radicals (OH), SDZ was steady degraded on the surface of TiO₂-NSs. Based on the identification of the produced intermediates by LC–MS/MS, possible degradation pathways of SDZ, which include desulfonation, oxidation and cleavage, were put forwards. After UV irradiation for 4 h, nearly 90% of the total organic carbon (TOC) can be removed in suspensions of TiO₂-NSs, indicating the mineralization of SDZ. TiO₂-NSs also exhibits excellent stability in photocatalytic degradation of SDZ in wide range of pH. Even after recycling used for 7 times, more than 91.3% of the SDZ can be efficiently removed, indicating that they are promising to be practically used in treatment of wastewater containing antibiotics.     

Influence of silica fillers during the electron irradiation of DGEBA/TETA epoxy resins, part II: Study of the thermomechanical properties

This work describes the influence of silica fillers on the thermomechanical properties of diglycidyl ether of bisphenol A/triethylenetetramine (DGEBA/TETA) epoxy resins during ageing under electron beam irradiation. Whatever be the silica filler (pure micrometric ground and spherical silicas, nanometric silicas and coupling agent treated silicas), the glass transition temperature of the epoxy resins decreases with increasing irradiation dose, meaning that the main effect of the irradiation is chain scission. No influence of the silica fillers has been detected from the changes in the glass transition temperature with the increase in the irradiation dose. The disappearance of the cooperativity of the γ relaxation, the decrease of the α relaxation and the decrease of the elastic modulus at the rubbery plateau observed by dynamic mechanical analyses involve a decrease in the crosslink density of the epoxy resins. The occurrence of chemical reactions between the epoxy resin and the silica surface at high irradiation doses has been shown. Moreover, we show evidence that chemical reactions between the epoxy resin and the silica surface occur at high irradiation dose.     

Thermal and thermoxidative degradations of starch and thermosensitive starch-g-BAM copolymers

Summary Thermal degradation under N₂atmosphere and thermoxidative degradation under air atmosphere of increasingly grafting efficiency values (i.e. GE%=0.0 to 35.5) for starch and starch grafted with N-tert-butylacrylamide thermosensitive copolymers (starch-g-BAM) by Ozawa and Kissinger methods using thermogravimetric analysis (TG) and differential scanning calorimetry techniques (DSC) at 10, 30 and 50% mass losses respectively have been studied. Influence of physical inter and intra molecular interactions on grafting and consequently on activation energy of degradation (E_a,d) was investigated using Ozawa's method, whereas linear dependence of E_a,don GE% by scaling relations using Kissinger's method was determined. Furthermore, the thermoxidative degradation induces the possibility of molecular rearrangement, cyclization and partial crosslinking that is deduced from the activation energy of degradation (E_a,d) and residual mass of TG profile. Thermal stability of starch does not alter as a result of different grafting efficiency percentages.