Synthesis of Eight‐shaped Poly(ethylene oxide) by the Combination of Glaser Coupling with Ring‐opening Polymerization

The eight‐shaped poly(ethylene oxide) (PEO) is synthesized by a combination of Glaser coupling with ring‐opening polymerization (ROP). Firstly, the star‐shaped (PEO‐OH) ₄ is synthesized by ROP of ethylene oxide (EO) using pentaerythritol as an initiator and diphenylmethyl potassium (DPMK) as a deprotonated agent, and then the alkyne group is introduced onto the PEO arm‐end to give (PEO‐Alkyne) ₄ in a NaH/tetrahydrofuran (THF) system. The intramolecular cyclization is carried out by a Glaser coupling reaction in a pyridine/CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) system at room temperature in an air atmosphere, and eight‐shaped PEO was formed with high efficiency (almost 100%). The target polymers and intermediates were well characterized by SEC, MALDI‐TOF MS, ¹H NMR and FT‐IR in detail.

     

Stirring-induced crystallization of polyethylene from Decalin

Stirring-induced solution grown fibrillar crystals of polyethylene have been obtained from solution in Decalin. The crystals were examined by electron microscopy, and their melting and annealing behavior as well as their response to attack by fuming nitric acid were investigated. Crystals formed at lower temperatures exhibit the morphology and properties of conventional shish kebabs. Crystals formed at higher temperatures have a ribbonlike morphology and exhibit different properties from those of conventional shish kebabs.     

Structural,thermal and ion transport studies on nanocomposite polymer electrolyte-{(PEO + SiO<Subscript>2</Subscript>):NH<Subscript>4</Subscript>SCN} system

Development and characterisation of polyethylene oxide (PEO)-based nanocomposite polymer electrolytes comprising of (PEO-SiO₂): NH₄SCN is reported. For synthesis of the said electrolyte, polyethylene oxide has been taken as polymer host and NH₄SCN as an ionic charge supplier. Sol–gel-derived silica powder of nano dimension has been used as ceramic filler for development of nanocomposite electrolytes. The maximum conductivity of electrolyte ∼2.0 × 10⁻⁶ S/cm is observed for samples containing 30 wt.% silica. The temperature dependence of conductivity seems to follow an Arrhenius-type, thermally activated process over a limited temperature range.     

Iodine-transfer polymerization and CuAAC “click” chemistry: A versatile approach toward poly(vinylidene fluoride)-based amphiphilic triblock terpolymers

This study presents the synthesis and properties of linear PVDF-based amphiphilic triblock terpolymers with PS and PEO, [PVDF-b-PS-b-PEO], by adopting a procedure that involves: (a) iodine-transfer polymerization (ITP) of VDF with 1-iodoperfluorohexane (C₆F₁₃I) serving as chain-transfer agent (CTA) to afford C₆F₁₃-PVDF-I, (b) ITP of styrene with the C₆F₁₃-PVDF-I macromolecular-CTA to obtain C₆F₁₃-PVDF-b-PS-I diblock copolymer, (c) end-group exchange from iodo- to azido-group by nucleophilic substitution reaction with NaN_3, and (d) copper-catalyzed azide-alkyne cycloaddition (CuAAC) with alkyne-terminated PEO to achieve C₆F₁₃-PVDF-b-PS-b-PEO triblock terpolymers. The ¹H and ¹⁹F NMR spectroscopy confirmed the presence of all blocks, while gel permeation chromatography traces showed the living nature of ITP technique. The self-assembly of these terpolymers was investigated in films (atomic force microscopy and DSC), as well as in aqueous and organic solvents (DLS). The analysis of crystalline phases based on the FTIR spectroscopy indicated the conversion of PVDF α-phase into α + β-phases and β + γ-phases upon the incorporation of PS and PEO blocks, respectively. The synthesized amphiphilic copolymers were evaluated (fluorescence spectroscopy) as carriers of small hydrophobic molecules in water. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 163–171     

相态结构对聚氧化乙烯/丁二腈/高氯酸锂复合电解质室温电导率的影响

采用聚氧化乙烯(PEO)、丁二腈和高氯酸锂(LiClO4)的复合电解质体系, 制备了一系列不同配比的PEO/SN/LiClO4复合电解质, 对其室温电性能和相态结构进行了表征, 并探讨了相态结构对室温电导率的影响.     

FT‐IR Studies of Plasticization of Propylene Carbonate and Ethylene Carbonate in PEO‐NaSCN Polymer Electrolytes

The FT‐IR spectra of poly(ethylene oxide) (PEO)‐based gel polymer electrolytes (GPEs), PEO‐NaSCN‐propylene carbonate (PC) and PEO‐NaSCN‐ethylene carbonate (EC), were measured at room temperature. Along with the FT‐IR spectra of NaSCN‐PC, PEO‐PC, and PEO‐EC, the interactions in the GPEs and the plasticizations of PC and EC are revealed. It is shown that the coordination of ether oxygen in PEO with NaSCN is the preferential solvation, whereas the interactions of PC and EC with NaSCN are relatively weak in the GPEs. However, both PC and EC play an important role in inhibiting the formation of crystalline complexes and high ionic aggregations, in addition to the ability of transformation of PEO from crystal to amorphism. It is further observed that EC exhibits the stronger ability to transform PEO crystalline into amorphism than PC when the plasticizer content in PEO is more than 25%, and also the far stronger ability to decompose the crystalline complexes, in particular, in polymer electrolytes with high salt content.     

An NMR investigation of the interaction of polyethylene oxide with water‐soluble poly(vinyl phenol‐co‐potassium styrene sulfonate)

The water‐soluble complex of polyethylene oxide (PEO) with poly (vinyl phenol‐co‐potassium styrene sulfonate) (PVPh‐co‐KSS) was studied by liquid‐state NMR. PEO showed two peaks in the ¹H spectra, which corresponded to the free and complexed PEO. The ratio of the free PEO/complexed PEO was decreased with the increase in the mixing ratio of PVPh‐co‐KSS/PEO. Some of the complex formation disappeared when the pH was raised from 6.4 to 12.0. It had been thought that at high pH, the phenolic groups dissociate and thus cannot form hydrogen bonds. The fact that NMR indicates some interaction at pH 12.0 implies there are some other interactions, such as hydrophobic interactions between the aromatic rings and the polyether methylene groups, contributing to PEO and PVPh‐co‐KSS complex formation. Nuclear Overhauser effect (NOE) cross peaks were observed between PEO and the aromatic protons of PVPh‐co‐KSS in nuclear Overhauser effect spectra (NOESY) suggesting that the distance between PEO and the aromatic protons of PVPh‐co‐KSS was less than 5 Å. The exchange between the complexed PEO and the free PEO was slow on the NMR time scale. The ratio of the integral of the complexed PEO to the free PEO increased with temperature, indicating that the number of PEO segments interacting with the aromatic ring increases with temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1276–1284, 2000     

Proton NMR investigation of the local dynamics of PEO in PEO/PMMA blends

Longitudinal relaxation of proton magnetisation was used to characterize the molecular motions of PEO chains in compatible PEO (hydrogenated)/PMMA (deuterated) blends. Both the temperature and the PEO concentration, Φ, were varied. A maximum in the spin–lattice relaxation rate was observed and its properties were analyzed as a function of Φ. For Φ ≤ 0.50, the maximum is observed below the glass transition temperature of the blend; this shows that PEO chains dispersed in a matrix of PMMA remain highly mobile on a local scale even below T_g(Φ). A frequency–temperature correspondence procedure, applied to the measurements performed at two Larmor frequencies, 32 and 60 MHz, leads to a characteristic correlation time for PEO molecular motions. Its temperature dependence obeys a WLF free volume relation above the glass transition of the blends. The PEO free volume fraction and its thermal expansion are strongly reduced by the presence of the PMMA chains. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1095–1105, 1997     

Thermosensitive lactitol-based polyether polyol (LPEP) hydrogels

A series of new thermosensitive polymer hydrogels were prepared by reacting acylated poly(ethylene glycol) bis(carboxymethyl) ether (PEGBCOCl) with lactitol-based polyether polyols (LPEP). The polyether polyols were generated from propoxylation of lactitol and have molecular weights ranging from 1337 to 4055 g/mol. The hydrogels absorb water up to 1000% of their dry weight and expel free water at temperatures at and above 30°C. The wide ranging swelling behavior and excellent thermosensitivity depend closely on the degree of crosslinking and the propylene oxide lengths in the polyols. Differential scanning calorimetry of the hydrogels showed two endotherms associated with the phase transitions of PO and EO segments in the hydrogel structures. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 979–984, 1998