助剂对Co/Al2O3催化剂浆态床费托合成反应性能影响

考察了ZrO₂、Ru或Pt助剂对Co/Al₂O₃催化剂结构及浆态床费托合成反应性能的影响。实验结果表明,添加ZrO₂助剂可阻止或降低难还原铝酸钴的形成、促进催化剂的还原、提高Co/Al₂O₃催化剂对费托合成反应的催化活性、降低甲烷选择性并提高C₅₊烃选择性。H₂-TPR表征结果表明,少量Ru或Pt助剂均能降低Co-ZrO₂/Al₂O₃催化剂中钴物种还原温度(Co₃O₄→CoO和CoO→Co⁰),提高催化剂的还原度,催化剂呈现出良好的CO加氢反应活性。此外,催化剂组分间浸渍次序对费托合成反应性能有重要影响,载体γ-Al₂O₃先浸渍Zr组分,可有效抑制难还原化合物形成;Co、Ru组分共浸渍加强了Co和Ru组分密切接触程度,更利于钴物种的还原;Co、Pt组分依次浸渍更利于活性组分的均匀分布,催化剂具有最佳的费托合成反应性能。     

Physicomathematical modeling of the processes of capillary impregnation of porous materials

The process of capillary impregnation of porous materials is studied numerically. A physicomathematical model of liquid diffusion in a porous sample is proposed. The model involves an analytical presentation of the diffusion coefficient, which describes available experimental data. A method of solving one-dimensional unsteady problems of impregnation is developed and tested on a self-similar solution of the corresponding boundary-value problem of impregnation. If the impregnation process is sufficiently long, the motion of the liquid in the sample is described by a stable self-similar solution. A classification of moisture diffusion on the basis of the initial humidity on the sample boundary is proposed. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 50, No. 1, pp. 42–51, January–February, 2009.     

Co_3O_4/BiOI复合催化剂的制备及其光催化性能

考察了两种方法制备的BiOI光催化剂,结果显示溶剂热法制备的BiOI比液相沉淀法制备的BiOI具有更好的光催化活性.然后,以溶剂热法制备的BiOI采用浸渍法制备了CoOx/BiOI复合催化剂,用X射线衍射(XRD)、紫外-可见(UV-vis)漫反射光谱、透射电子显微镜(TEM)等手段对其进行了表征,探讨了煅烧温度,煅烧时间以及Co掺杂量对其光催化性能的影响.结果显示:在300℃煅烧2h,Co的掺杂量为2.0%(Co/BiOI)的条件下,CoOx/BiOI复合物紫外光催化活性最高.结构研究表明,Co是以Co3O4的形式呈针状分布在团聚后的BiOI的表面,这有效地促进了BiOI的光催化性能.     

表面键联型TiO2/SiO2固定化催化剂的结构及催化性能

 采用浸渍法制备了表面键联型TiO2／SiO2固定化光催化剂．XRD\r\n,FT－IR,XPS和BET比表面积测定结果表明,TiO2通过Ti－O－Si联结\r\n负载于多孔硅胶的表面,由此提出TiO2／SiO2的结构模型．考察了多孔\r\n硅胶的粒度及氧化钛负载量对催化剂活性的影响．对活性艳红K－2G（\r\nR15）的光催化脱色反应,最佳的光催化剂30％TiO2／SiO2（Ims30）比\r\nB－TiO2粉末的催化速率快3倍．随着载体粒度的减小,催化剂的比表面\r\n积增大,催化活性升高;多孔硅胶不仅起着支持体的作用,而且具有分\r\n散的作用;多孔硅胶具有很好的透光性．经ξ－电位测定,所制备催化\r\n剂的等电点为3．0pH单位,表明催化剂表面呈酸性．     

陶瓷基钛掺杂硅胶块体吸附剂研究

以陶瓷纤维纸为基材, 顺次经水玻璃、酸性硫酸氧钛溶液浸渍共沉淀制得新型蜂窝状陶瓷基钛掺杂硅胶块体吸附剂. FTIR谱在波数954 cm^－1附近的特征吸收峰表明钛掺杂硅胶中存在Si-O-Ti键; XRD谱显示掺杂材料为无定型非晶相材料; SEM显示钛掺杂硅胶粒子较好地分散在陶瓷纤维表面及其空隙中; 用EDS及XPS揭示了材料的组成和钛原子含量, 根据钛掺杂前后XPS中Si2p, O1s, Ti2p 3/2电子结合能变化以及²⁹Si MAS NMR中硅原子化学位移差异, 进一步表明钛原子替代硅原子进入了四面体骨架; BET分析显示掺杂材料以中孔为主. 与硅胶相比, 由于钛掺杂, 其比表面积、孔容增大, 吸附性能、耐热性能增强.     

超临界CO2辅助制备聚苯乙烯/尼龙1010共混物及其结晶形态

超临界CO2辅助制备聚苯乙烯/尼龙1010共混物及其结晶形态;超临界CO2;插嵌;共混;尼龙1010;苯乙烯;附生结晶     

CO2／CH4重整镍基催化剂制备与性能的关系

一般浸渍法与真空浸渍法的比较说明,真空浸渍制备的催化剂,其表面具有较多的Ｎｉ原子,催化活性较高,现场ＴＰＯ实验表明,ＣＯ岐化的积炭量大于ＣＨ４解离的积炭量。从而提出镍基催化剂的积炭主要来自反应生成气ＣＯ的岐化。     

Test for Parameter Change in Diffusion Processes by Cusum Statistics Based on One-step Estimators

In this paper, we consider the problem of testing for a parameter change using the cusum test based on one-step estimators in diffusion processes. It is shown that under regularity conditions the cusum test statistic has the limiting distribution of a functional of Brownian bridge.     

Thermal quenching of photoluminescence of Eu3+ ions in an Eu(fod)3 complex

We have studied the photoluminescence (PL) spectra of Eu³⁺ ions in the complex Eu(fod)₃ (fod = 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octadione) and also in polymers doped with Eu(fod)₃ with the help of supercritical carbon dioxide. We have established that in the temperature range 20°C–100°C, we observe thermal quenching of the photoluminescence of Eu³⁺ ions, and this quenching is most efficient in polycrystalline Eu(fod)₃ powder and Eu(fod)₃-doped polypropylene. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 3, pp. 315–319, May–June, 2006.