Biohydrolysis of nylon 6,6 fiber with different proteolytic enzymes

In recent years, the textile industry must go towards sustainable technologies and developing environmentally safer methods for textiles processing. One way is the processing with enzymatic system, rather than conventional chemical methods. The aim of this work was to investigate the changes induced on nylon 6,6 fiber by enzymatic system using different proteolytic enzymes. Technical measurements were studied including Fourier-transform infrared spectroscopy, scanning electron microscopy, thermal, dyeability, and fastness properties. For this purpose, nylon 6,6 fabrics were first treated separately with different concentrations of four protease enzymes. The dyeing process was then carried out on the treated fabrics with two reactive and acid dyes. The intensity of major peaks in FTIR spectra of the protease treated samples is in favor of chemical changes of the polypeptide functional groups in fabric. Thermal studies also show significant decrease in thermal degradation temperature of the treated polymer. Reactive and acid dyes showed higher dyebath exhaustion on the enzyme treated samples compared to raw material. The results of color measurements showed that the more concentration of enzyme used, the darker the color of dyed sample is. Interesting results were obtained in the studied topic.     

Interior Multiplications and Deformations with Meson Algebras

A meson algebra is involved in the Duffin wave equation for mesons in the same way as a Clifford algebra is involved in the Dirac wave equation for electrons. Therefore meson algebras too should have geometrical properties after the manner of Grassmann. Actually it is possible to define interior multiplications with similar properties, and deformations too. Every meson algebra is a deformation of a neutral meson algebra, in the same way as (almost) every Clifford algebra is a deformation of an exterior algebra. Some applications follow: the PBW-property is proved for all meson algebras, the injectiveness of Jacobson’s diagonal morphism is proved with the minimal hypothesis, and the existence of Lipschitz monoids is established at least for meson algebras over fields.      

Bi2Fe4O9/g-C3N4/UiO-66三元复合材料的协同光催化作用

通过水热法合成具有协同机制的三元复合材料Bi₂Fe₄O₉/g-C₃N₄/UiO-66,研究表明三元复合光催化剂的催化活性要高于二元材料和纯材料。这主要是由于Bi₂Fe₄O₉更易于和g-C₃N₄结合形成稳定的Z-scheme异质结结构,使三元复合材料增强了可见光响应能力,提高了电子-空穴分离能力,增强了空穴和电子的氧化还原能力。     

A novel application of immobilization on membranes for the separation and spectrofluorimetric quantification of amiloride and furosemide in pharmaceutical samples

A new, simple and highly sensitive method for spectrofluorimetric determination of amiloride (AMI) and furosemide (FUR) in pharmaceuticals is presented. The proposed method is based on the separation of AMI from FUR by solid-phase extraction using a nylon membrane, followed by spectrofluorimetric determination of both drugs, on the solid surface and the filtered aqueous solution, respectively. AMI shows low native fluorescence, but its separation-preconcentration by immobilization (solid-phase extraction) on nylon membrane surface provides a considerable enhancement in fluorescence intensity. The fluorescence determination is carried out at λ_ex = 237, λ_em = 415 nm for FUR; and λ_ex = 365, λ_em = 406 nm for AMI. The calibration graphs are linear in the range 3.20 × 10⁻⁴ to 0.8 μg mL⁻¹and 1.33 × 10⁻³ to 4.0 μg mL⁻¹, for AMI and FUR, respectively, with a detection limit of 9.62 × 10⁻⁵ and 4.01 × 10⁻⁴ μg mL⁻¹ (S/N = 3). The commonly found excipients in commercial pharmaceutical formulations do not interfere. The developed method is successfully applied to the determination of both drugs in pharmaceutical formulations.     

The equations of elastostatics in a Riemannian manifold

To begin with, we identify the equations of elastostatics in a Riemannian manifold, which generalize those of classical elasticity in the three-dimensional Euclidean space. Our approach relies on the principle of least energy, which asserts that the deformation of the elastic body arising in response to given loads minimizes over a specific set of admissible deformations the total energy of the elastic body, defined as the difference between the strain energy and the potential of the loads. Assuming that the strain energy is a function of the metric tensor field induced by the deformation, we first derive the principle of virtual work and the associated nonlinear boundary value problem of nonlinear elasticity from the expression of the total energy of the elastic body. We then show that this boundary value problem possesses a solution if the loads are sufficiently small (in a sense we specify).     

Rheological and mechanical properties of nylon 6 nanocomposites submitted to reprocessing with single and twin screw extruders

The effect of multiple extrusions on nanostructure and properties of nylon 6 nanocomposites was investigated. Nanocomposites at different silicate loadings were produced by melt compounding and submitted to further reprocessing by using single and twin screw extruders. Rheological, morphological and mechanical analyses were carried out on as-produced and reprocessed samples in order to explore the influence of the number and the type of extrusion cycles on silicate nanodispersion.Rheological measurements, correlated to TEM analyses, were used to probe the nanoscale arrangement developed with the reprocessing as well as the thermo-mechanical degradation involving both the neat matrix and the organoclay. The results have shown that the reprocessing by single screw extruder can modify the initial morphology since the re-agglomeration of the silicate layers can occur. On the other hand, a better nanodispersion was observed in the hybrids reprocessed by twin screw extruder. This was attributed to the additional mechanical stresses able to realizing a dispersive mixing that contributes to avoid re-agglomeration phenomena. The high shear stresses produced with twin screw geometry determined also a significant degradation of neat matrix, principally based on chain scission mechanism.A strong correlation between the rheological behaviour and mechanical properties was observed and all as-produced and reprocessed hybrids showed a substantial enhancement in tensile modulus with the adding of silicate. However, the entity of performance enhancements displayed by the reprocessed hybrids was found to be highly dependent on the degradation of both organoclay and polymer matrix as well as the silicate amount, the number and the type reprocessing.     

On invariant subspaces and eigenfunctions of regular Hecke operators on spaces of multiple theta constants

Invariant subspaces and eigenfunctions of regular Hecke operators acting on spaces spanned by products of even number of Igusa theta constants with rational characteristics are constructed. For some of the eigenfunctions of genuses g=1 and g=2, corresponding zeta functions of Hecke and Andrianov are explicitly calculated.     

Measurement of uncertainty in peptide molecular weight determination using size-exclusion chromatography with multi-angle laser light-scattering detection and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

The molecular weight of biopolymers such as peptides or proteins is vital information for understanding their physical/chemical properties. The matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and size-exclusion chromotography-multi-angle laser light scattering (SEC-MALLS) techniques each with its advantages and limitations were used for molecular weight determination of the SPf66 peptide. The precision of each method was studied using a two-factor fully-nested design with all the analyses performed by the same operator on a single instrument. The overall precision corresponded to the time-different intermediate precision (i.e. time and repeatability conditions). In the case of SEC-MALLS, all potential uncertainty components were carefully evaluated in an Ishikawa diagram, then included and mathematically combined with the uncertainty arising from the accuracy assessment to provide the overall uncertainty. In this case, the refractive-index increment with solute concentration value (dn/dc) provided the most significant contribution to the combined uncertainty. A method for its quantitation is proposed. The accuracy of method B (SEC-MALLS) against reference method A (MALDI-TOF-MS) was assessed using the interval testing hypothesis to limit the risk of unacceptable bias. The results indicate that the bias of B is higher than the limit established at 5%, and is therefore not traceable to A under the studied conditions.     

Breather trapping and breather transmission in a DNA model with an interface

We study the dynamics of moving discrete breathers in an interfaced piecewise DNA molecule. This is a DNA chain in which all the base pairs are identical and there exists an interface such that the base pairs dipole moments at each side are oriented in opposite directions. The Hamiltonian of the Peyrard-Bishop model is augmented with a term that includes the dipole-dipole coupling between base pairs. Numerical simulations show the existence of two dynamical regimes. If the translational kinetic energy of a moving breather launched towards the interface is below a critical value, it is trapped in a region around the interface collecting vibrational energy. For an energy larger than the critical value, the breather is transmitted and continues travelling along the double strand with lower velocity. Reflection phenomena never occur. The same study has been carried out when a single dipole is oriented in opposite direction to the other ones. When moving breathers collide with the single inverted dipole, the same effects appear. These results emphasize the importance of this simple type of local inhomogeneity as it creates a mechanism for the trapping of energy. Finally, the simulations show that, under favorable conditions, several launched moving breathers can be trapped successively at the interface region producing an accumulation of vibrational energy. Moreover, an additional colliding moving breather can produce a saturation of energy and a moving breather with all the accumulated energy is transmitted to the chain.