RuO2·xH2O / MWNTs纳米复合物的超级电容特性研究

本文采用超声波技术合成了水合氧化钌/多壁碳纳米管纳米复合材料(Ru-MWNTs)前驱物，在150 ℃下热处理15 h后得到Ru-MWNTs。采用XRD及TEM对纳米复合材料进行表征，结果表明，水合氧化钌以无定型态比较均匀地沉积在MWNTs上。在1.0 mol·L^-1 H₂SO₄电解液中对Ru-MWNTs复合电极进行了电化学测试，循环伏安结果表明纳米复合物具有良好的电容性能，其比容量为100 F·g^-1，是MWNTs的6倍(MWNTs的比容量为15.5 F·g^-1)；本文还采用交流阻抗方法来分析频率与电容的关系，比较分析了MWNTs和复合材料的孔结构，表明在MWNTs中复合少量的水合氧化钌可以提高电极材料的充、放电速度。     

热历史对聚醚醚酮及其碳纤维复合材料——Ⅱ.熔融行为的影响

本文利用差示扫描量热仪(DSC)研究了聚醚醚酮(PEEK)和以PEEK为基体的碳纤维复合材料(APC-2)的热历史对它们熔融行为的影响。在200—315℃结晶并退火热处理后,试样的DSC曲线上出现了两个吸热峰。低温吸热峰(峰温T′_m)较小,并与结晶和退火温度(T_c)有关;高温吸热峰(峰温T_m)较大,几乎不受T_n的影响。T′_m的出现与在不同T_c下生成的不完整晶体的熔融和重结晶过程有关,而T_m的出现则与完整晶体的熔融过程有关。实验结果表明,T′_m与T_c之间呈线性关系。按文献报道的方法,将T′_m与T_c的直线外推至与T′_m=T_c直线相交,其交点温度即为平衡熔点.结果表明,PEEK和APC-2试样的“平衡熔点”受不同热历史条件下生成晶体的完整程度的影响。当结晶并退火时间越长,求出的“平衡熔点”值越低,并与理论值接近。实验结果还表明,碳纤维表面具有促进PEEK树脂基体晶体完整化的作用,因而导致APC-2试样中PEEK树脂基体的熔点高于纯PEEK树脂。     

镍钴复合氧化物的制备和析氧活性

用浸碱热分解法制备了具有较高析氧活性和稳定性的复合氧化物ＮｉＣｏ＿２Ｏ＿４。考察了涂液成分、热分解温度和涂覆次数对ＮｉＣｏ＿２Ｏ＿４析氧活性的影响；测定了氧在ＮｉＣｏ＿２Ｏ＿４从电极上的稳态电化学行为。     

ZrO2纳米粉末复合羊毛纤维研究

ＺｒＯ_２纳米粉末复合羊毛纤维研究陈代荣，樊悦朋（山东大学化学系济南２５０１００）关键词ＺｒＯ_２纳米粉末，羊毛纤维，复合纤维由陶瓷粉末和天然纤维形成的复合纤维的强度、织品的保暖性、抗起球性及防缩性能等均有所提高，报道较多的是微米级陶瓷粉末（粒径０．５...     

Morphology and tensile properties of glass bead filled low density polyethylene composites: MATERIAL PROPERTIES

The mechanical properties of glass bead filled low density polyethylene (LDPE) composites in tension have been investigated by using an Instron material testing machine. It is found that with increase of the glass bead weight fraction (φ) the tensile modulus (E_c) and the tensile yield stress (σ_yc) increase as a form of nonlinear function but contrary to the elongation strain at break; the correlation between E_c and φ accords with the logarithmic mixing rule and the relationship between σ_y and the volume fraction (φ_f) can be described by means of a second order equation; the effects of the glass bead diameter on the mechanical properties are not large; when φ and the bead size are suitable, the enhanced toughness effect of the filled-systems is more significant; the tensile strength of the glass bead filled system pretreated with a coupling agent are somewhat greater than those of the untreated system. In addition, the morphology of the samples is studied to explain the relationship between the micro-structure and the mechanical properties of the composites.     

毛细管电泳法快速测定复方地芬诺酯片中的地芬诺酯和阿托品

建立了毛细管电泳高频电导法同时测定地芬诺酯和阿托品的方法。探讨了缓冲溶液、有机溶剂添加剂、分离电压和进样条件以及毛细管内径和长度等因素对分离检测的影响。在电泳介质为10.0mmol/L乳酸-15.0?H5OH、分离电压20.0kV的优化条件下,6min内即可实现地芬诺酯和阿托品的同时分离检测,线性范围分别为5.00~500和2.00~320mg/L;检出限分别为3.0和1.0mg/L。     

STUDY ON PREPARATION OF INORGANIC COMPOSITE MEMBRANE AND ITS PROPERTIES FOR HYDROGEN PERMEATION

IntroductionDevclopmcntoftcchniqucsforthcscparationofgascousmixturesisofgrcatimportancetochemicalindustries.Rccentadvanccsinceramicmaterialprocessinghavcstimulatedtheeffortstodcvclopccramicormctallicmcmbrancsforgasseparation.Suchmembraneswouldbesuitableforthescparationsathightemperatureatx`hichthcx`ellcstablishedorganicpol}mermcmbranescannotfunctionButmostcommercialceramicmembranesxvhichcanbcobtainedinmarkctaremicroporous(porediamcterfromO.ItoloPm)whereseparationmcchanismisgovcrncdbyKnudscnd…     

Trapping Copper Phthalocyanine in a Silica Sono-Xerogel

A copper phthalocyanine (CuPc) has been encapsulated in silica. The trapping effects were studied comparing the UV-Vis absorption spectra of some CuPc solutions and composites prepared under different conditions. The trapped organic molecules’ stability was monitored during the gelation and drying processes. Leachability test have been carried out with the aim of checking the trapping efficiency. Hydrolysis water of pH=2 and a molar ratioR _w =6 mol acid H₂O/mol TMOS leads to a higher CuPc stacking angle homogeneity. The increase of Pc induces a narrower mesopore distribution and helps the stabilization of the composite.     

蒙脱石-石墨-聚氯乙烯复合电极测定制药废水中苯酚

报道了当制药废水PH8．0时，用蒙脱石－石墨－聚氯乙烯复合电极可以直接测定苯酚的含量而不受水杨酸存在的干扰，苯酚浓度在1．0μg/mL-25.0μg/mL范围内峰电流与浓度有良好的线性关系，I＝1．262c-0.046，相关系数r=0.998，检出限为0．1μg/mL，用该方法测定模拟制药废水中苯酚，其平均回收率为101．7％。     

Oxidative polymerization of aniline on the surface of insoluble solid poly(sulfo acids) as a method for the preparation of efficient biosorbents

Polyaniline coatings of the cation-exchange resin Dowex and a synthetic composite material based on silica gel surface-modified by a sulfated styrene-divinylbenzene copolymer were prepared by precipitative polymerization of aniline on the surface of the supports. The optimal conditions for the preparation of the polyaniline-containing material providing the formation of a thin polymeric coating on the support surface were determined. Aniline is predominantly consumed to the formation of a uniform polymeric coating about 3 nm thick with an increase in the concentration of sulfo groups on the support surface. The efficiency of using the polyaniline-containing sorbents for the preparative isolation of DNA from plant tissue lysates was demonstrated. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1123–1130, June, 2007.