固相萃取-气相色谱-质谱联用法测定水中的硝基苯类有机污染物的分析方法研究

建立了固相萃取、毛细柱气相色谱-质谱、内标标准曲线法使用选择离子(SIM)监测采集数据定量分析水中硝基苯类有机化合物的分析方法.通过对固相萃取柱的选择、固相萃取条件(样品溶液的pH、上样速率、上样体积、洗脱液选择及配比)的优化,得出了最佳实验条件.始漏体积达1.5 L.回收率大于80%.检出限为0.015～0.045 μg/L.RSD在1.1%～5.9%之间.     

壳聚糖表面修饰的SiO2负载Ni-B非晶态合金的制备及催化性能

以壳聚糖(CS)对SiO2进行表面修饰, 采用浸渍还原法制备了负载型Ni-B非晶态合金催化剂(Ni-B/CS/SiO2), 并采用XRD、FTIR、电感耦合等离子体发射光谱(ICP)、BET、XPS、TEM、SAED等表征方法研究了催化剂的非晶性质、原子组成、尺寸分布及粒径大小等. 考察了催化剂对糠醇加氢制四氢糠醇反应的催化性能, 并与没有壳聚糖修饰的Ni-B/SiO2催化剂及Raney Ni催化剂进行了对比. 结果表明, 加入壳聚糖制得的Ni-B/CS/SiO2催化剂的活性组分Ni-B团簇粒径更小, 表面活性组分浓度更高, 催化活性更高.     

The isolation, structural determination, and total synthesis of terfestatin A, a novel auxin signaling inhibitor from Streptomyces sp.

Indole 3-acetic acid, a plant hormone auxin, regulates every aspects of plant growth and development. In the screening for specific inhibitors on auxin signaling using the transgenic Arabidopsis plant harboring the auxin-responsive reporter gene, terfestain A was found to be a novel inhibitor of auxin signaling from the culture of Streptomyces sp. F40. The structure of terfestatin A was determined to be p-terphenyl β-glucoside on the basis of spectroscopic analyses, chemical degradation, and total synthesis.     

分子筛体系的氢溢出效应

分子筛体系的氢溢出效应李晓燕，盛太成，杨孔章（山东大学化学院，济南２５０１００）关键词铂／分子筛催化剂，氢溢出，程序升温脱附负载型金属催化剂的表面氢溢出效应近年来引起了人们的重视．人们采用不同的实验方法对此进行了广泛的研究，但对以分子筛为担体的负载型...     

Darstellung und Strukturen einiger N-(Tri-t-butoxysilyl)anilin-Derivate

Formation and Structures of N-(tri-t-butoxysilyl)aniline Compounds Para-substituted N-(tri-t-butoxysilyl)anilines (t-BuO)₃SiNRC₄H₄X-p, R = H, CH₃, with substituents of high electron affinity (X = CN, NO₂) were prepared by a one-pot reaction of tri-t-butoxychlorsilane, potassium t-butanolate and substituted anilines. Corresponding compounds with substituents of low electron affinity (X = OMe, H) preferably were prepared by metalation of anilines with sodium amide. Four crystal structures were determined. N-(tri-t-butoxysilyl)-p-nitro-aniline, N-methyl-(N-tri-t-butoxysilyl)-p-nitroaniline and N-(tri-t-butoxysilyl)-p-cyanoaniline crystallize at 298 K monoclinically, N-(tri-t-butoxysilyl)aniline crystallizes orthorhombically.     

Synthesis and fluorination of nitro-substituted thionocarbonates

Thiocarbonylchloride reacts with -nitroalcohols yielding symmetrical thionocarbonates. Transesterification of bis(2-fluoro-2,2-dinitroethyl)thioncarbonate affords alkyl 2-fluoro-2,2-dinitroethylthionocarbonates. Fluorination of these thionocarbonates yields the corresponding difluoroformals.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 375–376, February, 1993.     

Influence of two grinding methods on the uncertainty of determinations of heavy metals in atomic absorption spectrometry/electrothermal atomisation of plant samples

 Chemical analyses of trace elements are affected by relatively high analytical errors due to the different steps of the laboratory procedures: samples grinding, mineralisation and instrumental measurements. In the present communication, the influence of the grinding phase on the global uncertainty of Pb, Cd, Ni and Cr determinations in plant samples by the classical method of atomic absorption spectrometry/electrothermal atomisation (AAS-ETA) after dry ashing is quantified. Two grinding machines, a planetary mill with balls and jars of agate versus a stainless steel grinder were compared by analysing leaf samples of cucumber, strawberry, kiwivines, apple trees and grapevines from agricultural experimental plots under controlled conditions. Variance components due to the difference between grinding methods and experimental plots were estimated. Further, the simultaneous effects of the grinding methods on all considered metals have been evaluated by analysis of variance. With the stainless steel grinder, on average, higher levels of the considered heavy metals were obtained (up to 67% of the mean values). On average, the increments were similar for metals contained in steel (Ni and Cr) and those not contained (Pb and Cd). The true causes of these differences need further investigation to determine whether the higher metal detection is due to possible contamination, to a different grinding quality or to other reasons. Finally, the grinding methods did not seem to affect the combined uncertainty of the analyses. Received: 3 November 1997 · Accepted: 29 November 1997     

Conversion ofn-hexane over Pt?Sn/γ-Al2O3 catalyst

Conversion ofn-hexane has been applied as a test reaction to study differences between the series of Pt−Sn/γ-Al₂O₃ catalysts obtainedvia different methods of preparation. Preliminary results of catalytic experiments have been compared with some changes occurring on the catalysts surfaces as the results of the preparation technique applied. It has been found that catalysts with the second metal (Sn) introduced to the support by the coprecipitation technique were much more stable in comparison to the catalysts where the tin component has been added by the impregnation method, however, we have not observed large differences in catalytic activity.     

Quantitative aspects of gradient HPLC of copolymers from styrene and ethyl methacrylate

Summary Prerequisite of quantitative evaluation in chromatography is equivalence of sample composition and detector signal. This includes complete retention and proper elution of all sample constituents. In polymer HPLC, complete retention requires a poor starting eluent, a sufficiently active column, and a low ratio of injection volume to column volume. On small pore columns, insufficient retention caused the polymer to elute either in the interstitial volume (sample exclusion), together with the sample solvent, or immediately after the solvent plug.Stat-copoly(styrene/ethyl methacrylate) samples are more difficultly retained thanstat-copoly(styrene/acrylonitrile) specimes. With the former copolymer it could be shown that incomplete retention did not cause sample demixing. In order to gain complete retention, non-exclusion HPLC of polymers should be performed with columns whose solvent volume is at least 50 times as large as the injection volume. This consequence is of practical importance in chromatographic cross-fractionation where rather large volumes of SEC eluate are injected into the apparatus for gradient HPLC.     

乳液体系中的RAFT可控/活性自由基聚合研究进展

可逆加成-断裂链转移聚合(RAFT)是新近发展起来的可控/活性自由基聚合方法。由于该方法具有适用单体范围广、反应条件温和、可采用多种聚合实施方法等优点,已成为一种有效的分子设计手段。本文总结了近几年文献报道的在乳液和细乳液体系中实施RAFT聚合反应的研究进展,对非均相体系的稳定性、聚合反应过程中的动力学特点、以及聚合产物的分子量及其分布等方面的研究进行了综述。