UV protection filters by dielectric multilayer thin films on Glass BK-7 and Infrasil 301

The increasing use of Ultraviolet (UV) light in medicine, industrial environments, for cosmetic use, and even in consumer products necessitates that greater attention be paid to the potential hazards of this type of electromagnetic radiation. To avoid any adverse effects of exposure to this type of radiation, four suitable protection filters were produced to block three UV bands (UVA, UVB, and UVC). The design structure of the required dielectric multilayer filters was done by optical thin film technology using the absorbing property of UV radiation for the substrates and dielectric materials. The computer analyses of the multilayer filter formulas were prepared using Macleod Software for the production processes. The deposition technique was achieved on optical substrates (Glass BK-7 and Infrasil 301) by dielectric material combinations including Titanium dioxide (Ti₂O₃), Hafnium dioxide (HfO₂), and Lima (mixture of oxides SiO₂/Al₂O₃); deposition being achieved using an electron beam gun. The output results of the theoretical and experimental transmittance values for spectral band from 200 nm to 800 nm were discussed in four processes. To analyze the suitability for use in ‘real world’ applications, the test pieces were subjected to the durability tests (adhesion, abrasion resistance, and humidity) according to Military Standard MIL-C-675C and MIL-C-48497A.     

Synthesis and crystal structures of extremely crowded oligophenylenes as model precursors to ‘cubic graphite’

By using drastic conditions for a Diels-Alder cycloaddition reaction, it was possible to synthesize an oligophenylene with an extremely dense packing of the benzene rings. Crystallographic data could be obtained and a projection of the structure on the plane of the central phenyl ring reveals that the molecule retained its theoretical threefold symmetry with only minor deviations. Due to its dense packing of interlocked benzene rings, this oligophenylene could be furthermore used as a suitable precursor for constructing a subunit of ‘cubic graphite’.     

Production of carbon soot with a high content of C60 and C70 fullerenes by electric arc

The effect of the parameters of the electric arc (helium pressure, current and voltage, clearance between electrodes) and of the peculiarities of the setup design (arrangement of electrodes, distance between the arc and the cooling surface, temperature of the soot condensation surface) on the yield of fullerenes has been studied. Conditions for producing soot with a C₆₀ and C₇₀ content up to 43% (toluene extract) have been found.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 805–809, May, 1994.The authors are grateful to N. G. Spitsyna and A. V. Dubovitskii for the determination of the content of C₆₀ and C₇₀ fullerenes in the extract.The work was financially supported by the Russian Foundation for Basic Research (Project 93-03-18705).     

Effectiveness of linearization of calibration curves in Zeeman graphite furnace atomic absorption spectrometry

A theoretical analysis is made of the effect of analytical line broadening and of non-absorbable radiation in the light source on the shape of concentration curves in Zeeman graphite furnace atomic absorption spectrometry. These results have been used in a systematic study of the effect of spectrometer slit width and hollow-cathode lamp (HCL) current on linearization of calibration graphs for 11 elements: Ag, Au, Bi, Cd, Co, Cu, Fe, Mn, Ni, Pb, and Sb. The effectiveness of linearization throughout the analytical range covered was estimated experimentally on series of 25–30 solutions. Three solutions in each series were used as standards for constructing the calibration graph, the others serving to evaluate the linearization effectiveness. Increasing the slit width and decreasing the HCL current compared to the standard measurement conditions have permitted us to reach a sufficiently high effectiveness of linearization for all the elements studied, with the exception of Ni. The maximum deviation of experimental points from the linear graph under optimum conditions does not exceed 6%. The effect of the Δ parameter used in the computational algorithm on linearization effectiveness is investigated.     

Stabilization of Graphite Nitrate by Intercalation of Organic Compounds

New thermally stable intercalation compounds of graphite were obtained by the further intercalation of a series of organic compounds into graphite nitrate. The stabilization is explained by the formation of hydrogen bonds between the protonated form of the modifying substance and neutral surrounding molecules.     

Facile synthesis of exfoliated and highly conductive poly(arylene disulfide)/graphite nanocomposites

Exfoliated graphite has been synthesized by first synthesizing H₂SO₄ intercalated compound in a H₂O₂‐H₂SO₄ mixture, followed by exfoliation under microwave irradiation. Poly(arylene disulfide)/graphite nanocomposites were then fabricated by absorbing cyclic(arylene disulfide) oligomers into the pores of exfoliated graphite. Subsequently, the nanocomposite precursor was subjected to heat treatment to carry out the in situ ring‐opening polymerization of the oligomers via free radical mechanism. The as‐prepared nanocomposite exhibited a exfoliated nanostructure as evidenced by transmission electron microscopy (TEM) observation. The nanocomposite with a very small amount of graphite, 5 wt%, possesses a highly electrical conductivity of 4 S/cm, therefore, many applications can be found as conductive materials. Copyright © 2004 John Wiley & Sons, Ltd.     

[SiNi(H2O)W11O39]6-多层组装膜修饰电极及其电化学行为

采用电化学生长法制备包含杂多酸[SiNi(H2O)W11O39]6-(SiNiW11)和聚合物阳离子PDDA的多层膜修饰电极, 利用循环伏安法研究其电化学行为、 pH的影响及其对BrO3-和NO2-体系还原的电催化性能;并对多层膜电化学过程机理进行了初步探讨. 结果表明: 多层膜的增长均匀, 峰电流随层数的增加而增加;多层膜的峰电流随扫速的增加而增加;还原峰的峰电位随pH的增加而负移.     

New generalized computations of quasi-planar waveguides characteristics

An efficient hybrid field solution to the general multilayer substrates transmission line problems with full shielded and half open cross-sectional geometry is presented by using the waveguide modes coupling and decoupling procedure in the spectral domain. Modal transverse transmission lines corresponding to the LSE and LSM modes are taken into account so that the Green's elements for the edge conditions can be derived by a simple iterative method. In this paper, we analyze not only the propagation constants and characteristic impedances but also the available transmission power capacity and power distribution of most commonly used structures. Normalized eigenmode power levels characterizing the propagation features are computed.     

低硫可膨胀石墨的制备

低硫可膨胀石墨的制备宋克敏，路文义，高淑英，阎秋燕（河北教育学院石家庄０５００９１）关键词低硫可膨胀石墨，制备，过氧化氢，硫酸柔性石墨具有耐高温、耐酸碱、抗拉、抗压、抗辐射、回弹性等优良性能，被广泛应用于化工、机械、肮天、原子能等领域。但其原材料可膨...