阳极氧化膜WO3（Ⅱ）：电显色的介质效应

用循环计时电量法、循环伏安法、电化学现场(in-situ)紫外可见反射光谱技术和光电流谱技术研究了溶剂和阳离子(H~+,Li~+)对阳极氧化膜WO_3电显色稳定性和过程的影响。从循环计时电量图可以测定表征膜稳定性的氢或锂的累积量和暂态周期数。实验发现W/WO_3/LiCLO_4乙腈溶液体系具有高的电显色稳定性。引起WO_3膜可逆电显色的H~+和Li~+离子的嵌-脱过程的界面电化学机理不同。着色态WO_3膜的色心是自由电子,其密度超过10~(21)/cm~3,生色机理是等离子体振荡。     

Heterobimetallische Komplexe mit Chelatliganden aus mehrzähnigen Aminen und 1,1-Bis(diphenylphosphan)ethen

Heterobimetallic Complexes with Chelate Ligands from Multidentate Amines and 1,1-Bis(diphenylphosphine)ethene By an addition reaction of bidentate amines Me₂N(CH₂)_nNH₂ (n = 2, as-4C2N; 3, as-5C2N) and vinylidene derivatives with an activated double bond CH₂ = C(PPh₂)₂M(CO)₄ (M = Cr, Mo, W) were synthesized in dichlormethane unsymmetrical chelate ligands of the type as-4C2N (or as-5C2N)PPM(CO)₄. They gave with divalent salts M′Y₂ (Y = ac, M′ = Cu, Ni. Y = Cl, M′ = Zn, Cd, Hg) the coloured bimetallic complexes M′Y(as-4C2N) (or as-5C2N)PPM(CO)₄ which were characterized by means of IR-, UV/VIS spectroscopic and ¹H, ¹³C and ³¹P NMR measurements. The molecular structures of the complexes Cuac₂(as-5C2N)PPCr(CO)₄, I and that of CdCl₂(as-4C2N)PPCr(CO)₄, II , were acertained by results of single crystal X-ray determinations. In the crystals of I—II , the coordination polyhedron of each chromium(0) central atom containing two phosphorous donor atoms in a four-membered chelate ring and four terminal CO ligands is octahedrally distorted. This coordination sphere is connected at the carbon ring atom via a methylen chain group (spacer) with the bidentate amine ligand, which has a secondary and a tertiary nitrogen donor atom. Both nitrogen atoms are coordinated with the Cuac₂ under formation of a new kind of [4 + 2]-coordination in a trischelate complex. The six-membered diamine chelat ring in I has a chair-like conformation. The chromium-cadmium complex II is dimer from which the Cd central atoms obtain the rare coordination number of five. The related five-membered diamine chelate ring has δ conformation.     

[(Mes3Sn)2MoO4], ein monomeres Triorganozinnmolybdat

[(Mes₃Sn)₂MoO₄], a Monomeric Triorganotin Molybdate Mes₃SnBr (Mes = 1, 3, 5‐trimethylphenyl) reacts with (NBu₄)₂[Mo₆O₁₉] in the presence of (NBu₄)OH (in CH₃CN as solvent) to form [(Mes₃Sn)₂MoO₄]. Alternatively the title compound can be obtained from the reaction of [MoO₂(acac)₂] (acac = 2, 4‐pentadionate) with Mes₃SnOH in isopropanol. [(Mes₃Sn)₂MoO₄] forms monoclinic crystals, space group C2/c, with a = 2271.6(3) pm, b = 825.2(1) pm, c = 2739.9(5) pm, β = 90.96(2)°. The crystal structure consists of isolated molecules in which a tetrahedral MoO₄ unit is connected to two terminal Mes₃Sn groups. The Mo‐O distances range from 169.6(4) to 181.1(3) pm and the Sn‐O distance is 204.8(3) pm.     

Novel Reactions of Organomolybdenum and Organotungsten Compounds: Additive–Reductive Carbonyl Dimerization,Spontaneous Transformation of Methyl Ligands into μ-Methylene Ligands,and Selective Carbonylmethylenation

Hitherto there was no reaction known that permits transformations of R¹R²-CO → 0.5 R¹R²R³C–CR¹R²R³ in one step. This type of additive–reductive carbonyl dimerization is now possible using alkoxy(alkyl)tungsten(v) complexes with aromatic, heteroaromatic or α,β-unsaturated aldehydes and ketones. When a corresponding phenyl complex was employed in a test experiment, it was revealed that an aliphatic ketone could be used as the substrate in this reaction. A second interesting type of reaction is the transformation of CH₃ ligands into μ-CH₂ ligands, which occurs during the treatment of MeLi or Me₃Al with molybdenum or tungsten chlorides (oxidation states VI and V, for Mo additionally IV) at low temperatures with liberation of CH₄. Here, the question arises as to whether the intermediate involved has a terminal CH₂ ligand (Schrock carbene complex) or a μ-CH₃ ligand (CH₃ bound by a two-electron three-center bond to two metal atoms). Of all the μ-CH₂ complexes obtained, those which were synthesized by the action of MeLi on molybdenum chlorides can be recommended as reagents for carbonylmethylenation of aldehydes and ketones. They display high selectivity, very low basicity, a surprising resistance to protons, they are readily available, can be easily modified and, as regards their selective behavior, they have been investigated more thoroughly than other readily accessible carbonylmethylenation reagents of comparable selectivity. The results of NMR spectroscopic investigations on the structure of the μ-CH₂ complexes, and associated reaction mechanisms are discussed. A survey of carbonylmethylenation reagents, which have been reported in the literature, permits comparisons to be made with carbonylmethylenating molybdenum and tungsten complexes.     

含钼化合物及其配合物的抗癌抗肿瘤活性

钼是生命体所必需的微量元素。本文介绍了钼在人体中的作用，钼缺乏和钼过量对人体的影响，并介绍了含钼化合物以及配合物的抗癌抗肿瘤研究情况。     

BF_3·OEt_2对钼体系催化合成1,2-聚丁二烯的影响

在以加氢汽油为溶剂,MoCl_3(C_7H_(15)COO)_2(Mo)为主催化剂,(i-Bu)_2AlO〈O〉(Al)为助催化剂合成1,2-聚丁二烯的二元催化体系中,添加BF_3CH3·OEt_2等,对体系的催化活性影响显著。以的混合物为第三组份加入催化体系,较大幅度提高了钼系催化体系的活性。在Mo/Bd=8.0×10~(-5)(摩尔比),聚合5小时,丁二烯转化率可达到70％。初步搞清了钼催化体系合成的1,2-聚丁二烯中产生凝胶的条件,推测了凝胶的生成原因,考察了聚合条件对催化活性、分子量及微观结构含量的影响。     

Preconcentration using diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) for determination of molybdenum(VI) in seawater by ICP–OES

This paper reports a new method for preconcentration and separation of trace amounts of molybdenum in seawater samples prior to determination by inductively coupled plasma–atomic emission spectroscopy (ICP–OES). Diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) was synthesized by carboxymethylation of amino groups on triamine immobilized polymer, which was prepared by modification of 3-chloropropylpolysiloxane with diethylenetriamine. The resulting polysiloxane is highly selective and efficient in chelating Mo(VI) at trace levels. It can be used as a column packing material. The polysiloxane column can be reused over ten times without losing its original properties, so it is suitable for preconcentration of molybdenum species in seawater samples before determination. The parameters governing the characteristics of polysiloxane for adsorption of Mo(VI) were investigated. These include the effect of pH, amount of polysiloxane, equilibrium time, adsorption isotherm, maximum adsorption capacity, interfering ions, flow rate, capacity for reuse, and desorption. The precision of the preconcentration method, calculated as the relative standard deviation of seawater samples, was 3%. The preconcentration factor was 100. The detection limit, defined as 3 times the standard deviation of five replicate measurements of the blank sample at pH 3, was 0.17 g L^–1. Measurement results for standard reference materials were in good agreement with the certified values [(CRMs), NASS-2 Seawater (Open Ocean) and CASS-2 Seawater (Coastal)].     

Preparation and structural characterization of a hexanuclear molybdenum (II) cluster containing carboxylate ligands (Bu4N)2[Mo6(μ3-Cl)8(O2CMe)6]

The hexamolybdenum cluster complex [Mo₆(₃-Cl)₈(O₂CMe)₆]^2–, 1 was isolated as the Bu₄N⁺ salt in 71% yield from the reaction of (Bu₄N)₂[Mo₆(₃-Cl)₈Cl₆] with AgO₂CMe in CH₂Cl₂ solvent. The compound was characterized by single crystal X-ray diffraction analysis. The cluster contains an octahedral arrangement of six molybdenum atoms with eight chloride ligands bridging the eight trianglar faces and six carboxylate ligands terminally coordinated through one oxygen atom to each of the six molybdenum atoms. Crystal data: space group =P2₁/n,a=10.713(3)Å,b=14.43(1)Å,c=21.919(4)Å, =94.37(2)°,Z=2, 1965 reflections,R=0.036.     

Structural Studies of Bis(cyclopentadienyl)molybdenum‐Amino Acid Complexes

The crystal structures of molybdocene‐amino acid compounds of the type [Cp₂Mo^IV(κN, κO‐AA)]⁺Cl^—·xH₂O with AA = D ‐phenylalaninato (x = 1.5), DL ‐leucinato (x = 2) and DL ‐valinato (x = 1) have been determined (Cp = η⁵‐C₅H₅). The compounds feature an almost planar, five‐membered chelate ring of the aminocarboxylate moiety (deprotonated amino acid) with the molybdenum atom. In the phenylalaninato complex π‐stacking between the phenyl rings is found. The complexes were proven kinetically stable at pH < 1 for at least 24 h.     

Mixed-metal cluster chemistry. 26 . Proclivity for “all-terminal” or “plane-of-bridging-carbonyls” ligand disposition in tungsten-triiridium clusters

Reaction of WH(CO)₃(η-C₅Me₅) with IrCl(CO)₂(4-H₂NC₆H₄Me) affords WIr₃(μ-CO)₃(CO)₈(η-C₅Me₅) in low yield. A structural study reveals a WIr₂-centred plane of bridging carbonyls, in contrast to the crystal structure of WIr₃(CO)₁₁(η-C₅H₅) (all-terminal carbonyl distribution). DFT calculations reveal an increasing proclivity to adopt an all-terminal CO disposition for clusters MIr₃(CO)₁₁(η-C₅H₅) in the gas phase on proceeding from M=Cr to Mo and then W, consistent with structural studies in the solid state for which the tungsten-containing cluster is the only all-terminal example. Increasing electron donation from the ligands in the tungsten system (either from phosphine substitution or cyclopentadienyl permethylation) suffices to impose a plane of bridging carbonyls in the ground state structure. ¹³C NMR fluxionality studies reveal that CO exchange mechanism(s) for WIr₃(CO)₁₁(η-C₅H₅) and the related tetrahedral cluster W₂Ir₂(CO)₁₀(η-C₅H₅)₂ are very fast and involve all carbonyls on the clusters. DFT calculations on MIr₃(CO)₁₁(η-C₅H₅) (M=Cr, Mo) substantiate a ‘merry-go-round’ mechanism for carbonyl scrambling in these systems, a result which is consistent with the scrambling behaviour seen in the NMR fluxionality studies on the W-containing congener.