Preparation and photocatalytic properties of silica-supported fine CdS powders

Summary Silica-supported cadmium sulfide, highly active in hydrogen photogeneration from water-methanol-KOH solution, was prepared by sulfidation of Cd²⁺-impregnated SiO₂. The samples consisted of colloidal-size hexagonal crystallites of CdS on amorphous SiO₂. A blue shift of a light absorption edge was observed for the samples with lower CdS content.

---

Herstellung und photokatalytische Aktivität von feinen CdS-Pulvern auf SiO₂

Zusammenfassung Es wurde Cadmiumsulfid auf Kieselgel durch Sulfidierung von Cd²⁺-imprägniertem SiO₂ hergestellt, das eine außerordentliche Aktivität bei der Wasserstoff-Photogenerierung aus Wasser-Methanol-KOH-Lösungen zeigte. Der Katalysator bestand aus hexagonalen CdS-Kristalliten von kolloidalen Ausmaßen auf amorphem SiO₂. An Proben mit geringerem CdS-Gehalt wurde eine Blauverschiebung der Lichtabsorption an der Absorptionskante beobachtet.

     

Photoinduced Electron Transfer between CdS and CdTe Nanoparticles in Colloidal Solutions

The photochemical behavior of solutions containing a mixture of CdS and CdTe nanoparticles under pulsed irradiation conditions was investigated. It was shown that electron transfer from the CdS particles to the CdTe nanoparticles occurs during the photoexcitation of such systems. The effectiveness of the process is increased with increase in the size of the CdTe nanoparticles. Such behavior is due to decrease in the potential of the CdTe conduction band with increase in the size of the nanoparticles as a result of the appearance of quantum-dimensional effects.     

MoO_3（MOVS）系列催化剂上喹啉的加氯脱氮

将金属氧化物蒸汽合成法（ＭｅｔａｌＯｘｉｄｅＶａｐｏｕｒＳｙｎｔｈｅｓｉｓＭＯＶＳ）制各的Ｎｉ－Ｍｏ（ＭＯＶＳ）－Ｐ／Ａｌ２Ｏ３催化剂用于喹啉的加氧脱氮（ＨＤＮ）。结果表明，与常规方法制备的同类催化剂相比，ＭＯＶＳ催化剂具有较高的ＨＤＮ活性，主要表现在Ｃ－Ｎ键断裂和苯环加氢催化活性的提高。在负载高含量ＭｏＯ３方面，ＭＯＶＳ方法还有待进一步完善。文章还讨论了制备条件（酸度，载体种类等）对催化活性的影响。     

Group 6-group 10 heterobimetallic complexes with sulfur ligands

Complexes that contain both a group 6 group 10 metal combination and a sulfur bound ligand form a growing set of species. Their chemistry is discussed and reviewed. Ligands that bind to such heterobimetallic molecules most commonly are S^2– and SR^– species. Metal-metal bonded complexes, and compounds where metal-metal interactions are minimal are both discussed. The structural parameters for many of the crystallographically characterized complexes are tabulated.     

几种热塑性特种工程塑料的热分析研究

聚芳醚和聚芳硫醚两类聚合物都为热塑性的耐高温特种高分子材料 ,由于它们的加工性好、加工成型效率高 ,受到了世界各国的高度重视。这两类聚合物在结构上有许多相似之处 ,如它们的主链都含苯环、酮基或砜基 ,而聚芳醚类聚合物的柔性基团为醚键 ,聚芳硫醚类聚合物的柔性基团为硫醚键 ,但由于氧和硫在元素周期表中属于同一族元素 ,原子结构仍然相似 ,因而在某些方面具有一定的可比性。研究它们的性能差异对于改进聚合物性能以及进行进一步的结构设计将有一定的帮助。在这两类聚合物中 ,国内已商品化生产的品种有ＰＥＥＫ、ＰＥＳ和ＰＰＳ ,有…     

Ultrafine molybdenum carbide nanoparticles supported on nitrogen doped carbon nanosheets for hydrogen evolution reaction

Nitrogen doped carbon nanosheets supported molybdenum carbides nanoparticles (Mo_xC/NCS) have been synthesized by tuning the mass ratio of melamine and ammonia molybdate. The Mo₂C/NCS-10 exhibits superior electrocatalytic performance and stability for HER, which was attributed to N-doped carbon nanosheets, small particle size, mesoporous structure, and large electrochemical active surface area.     

Synthesis and characterization of poly(ethylene oxide-co-ethylene sulfone)s and their precursors: Poly(ethylene oxide-co-ethylene sulfide)s

Three poly(ethylene oxide-co-ethylene sulfide)s with oxygen to sulfur ratios of 2/1, 2/2, and 1/2 were prepared by phase-transfer catalyzed polycondensations of (1) sodium sulfide and 1,2-bis (2-chloroethoxy)ethane, (2) 1,2-ethanedithiol and 1,2-bis(2-chloroethoxy)ethane, and (3) 1,2-ethanedithiol and 2-chloroethyl ether, respectively. A buffered solution with pH between the pK_a of the monothiol (RSH) and the pK_a2 of the dithiol (HS–R–SH), or H₂S, was needed to obtain high molecular weight polymers, which suggests that nucleophiles transfer and react as monoanions rather than dianions. These poly(ethylene oxide-co-ethylene sulfide)s were oxidized completely to poly(ethylene oxide-co-ethylene sulfone)s using 3-chloroperoxybenzoic acid as oxidant. Both the final polymers and the precursors have regular sequenced structures and are semicrystalline. As expected, their glass transition temperatures and melting points increase and solubilities decrease with the decrease of ether oxygen to sulfur ratio. © 1994 John Wiley & Sons, Inc.     

Correction of iron interface in the spectrophotometric flow injection catalytic determination of molybdenum in plants

Iron interference in the spectrophotometric catalytic determination of molybdenum based on the iodide-hydrogen peroxide reaction can be corrected by using sulphosalicylic acid as masking and color-forming reagent. The catalytic influence of iron ions is circumvented to the extent of about 90% and correction of any remaining iron ions is possible by monitoring the colored iron(III)-salicylate complex at 490 nm. In this way, iron is also determined. With the proposed system, molybdenum can be determined in plant and food digests within the 0–100 μg Mo 1⁻¹ range in the presence of up to 25 mg Fe 1⁻¹, at a sampling rate of about 50 determinations h⁻¹. The relative standard deviation of 10 consecutive measurements was estimated as < 2%. Results for samples were comparable with those obtained by graphite furnace atomic absorption spectrometry. In addition, recoveries within the range 94–100% were calculated.     

Thermal analysis study of the effect of molecular weight on constrained amorphous phase in poly(phenylene sulfide)

We report a thermal analysis study of the effect of molecular weight on the amorphous phase structure of poly(phenylene sulfide), PPS, crystallized at temperatures just above the glass transition temperature. Thermal properties of Fortron PPS, having viscosity average molecular weights of 30000 to 91000, were characterized using temperature modulated differential scanning calorimetry (MDSC). We find that while crystallinity varies little with molecular weight, the heat capacity increment at the glass transition decreases as molecular weight decreases. This leads to a smaller liquid-like amorphous phase, and a larger rigid amorphous fraction, in the lower molecular weight PPS. For all molecular weights, constrained fraction decreases as the scan rate decreases.This research is supported by the U. S. Army Research Office through contract DAAH04-96-1-0009. The authors thank Hoechst Celanese for providing different molecular weight Fortron samples and Dr. George Collins for providing sample information. The authors acknowledge the assistance of Elizabeth Oyebode and Leonardo Grimaldi with sample preparation and MDSC work.     

C207联醇催化剂的羰基硫中毒研究

以常压甲醇分解反应为基础实验测定了不同羰基硫含量和不同反应温度下甲醇合成铜基催化剂活性随时间的变化。结果表明，羰基硫含量增加时；失活速率增快；反应温度升高时，失活速率也加快。羰基硫中毒前后催化剂样品的ＸＲＤ谱图证实了起催化作用的活性组分为Ｃｕ＾＋／ＺｎＯ。应用改进的高斯－牛顿法对失活实验数据进行参数估值，获得了Ｃ２０７铜基催化剂羰基硫中毒的失活速率方程。