Ag修饰的Fe_3O_4/TiO_2复合磁性纳米纤维的制备及光催化性能

通过静电纺丝法制备了含有Fe3O4纳米粒子的TiO2纳米纤维,采用水热法对该纤维表面进行纳米Ag修饰,制备出具有较强磁性和较好光催化性能的复合纤维.采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和紫外-可见光谱(UV-Vis)等对样品的结构和形貌进行表征,并以罗丹明B(Rh B)水溶液降解为模型反应,考察样品在紫外光照射下的光催化性能.结果表明,所制备的TiO2为锐钛矿结构,Fe3O4纳米粒子均匀分布在TiO2纤维中,Ag纳米颗粒比较均匀地分散在磁性TiO2纤维表面.经过纳米Ag修饰后,材料的光吸收能力大为增强,吸收带红移并扩展到可见光区.在紫外光照射40 min后,合成样品对Rh B的降解率达到99.5%.此外,Fe3O4纳米粒子的存在使该材料具有较强的磁性,可通过外加磁场将其分离回收.     

Determination of sulfonamides in milk samples by HPLC with amperometric detection using a glassy carbon electrode modified with multiwalled carbon nanotubes

A sensitive and accurate method for determining five sulfonamides based on HPLC with amperometric detection and using a glassy carbon electrode modified with multiwalled carbon nanotubes is proposed. Optimal conditions for the quantitative separation of selected sulfonamides were studied, and glassy carbon electrodes with and without modification with carbon nanotubes were systematically investigated as electrodic materials. Statistical analysis of the obtained results demonstrated that these modified electrodes achieved considerably better stability and sensitivity than the conventional unmodified ones. Detection limits were in the 1.2–6.0 ng/mL range. The usefulness of the method was demonstrated by the analysis of milk samples, taking into account the European legislation on residues in food products, following both a screening method to classify the samples and a confirmation method to provide more detailed information in the case of positive samples.     

高分散还原态Pt基催化剂的制备及其NO氧化的催化性能

Pt⁰被认为是NO氧化的活性物种,而催化剂的制备方法对活性物种的含量起着决定性作用。本文采用非惰性气氛保护的改性醇还原-浸渍法(MARI)合成了高分散高Pt⁰含量的1% (w, 质量分数) Pt/SiO₂-Al₂O₃催化剂(MA-Pt/SA)。X射线粉末衍射(XRD)、CO-漫反射傅里叶变换红外吸收光谱(CO-DRIFTS)和透射电镜(TEM)表征证实在550 ℃焙烧3 h后催化剂的Pt颗粒仅有3.8 nm。同时,X射线光电子能谱(XPS)和H₂-程序升温还原(H₂-TPR)结果表明催化剂具有高Pt⁰含量(60.3%)。模拟柴油车尾气气氛进行活性测试,并与传统浸渍法制备的1% (w) Pt/SiO₂-Al₂O₃催化剂(C-Pt/SA)对比,结果显示MA-Pt/SA具有优异的催化氧化性能,其NO最大转化率高达74%,比C-Pt/SA的NO转化率高了23%。经670 ℃高温老化15 h后,老化的MA-Pt/SA的NO转化率仍然高达69%。此外NO + O₂共吸附原位漫反射傅里叶变换红外吸收光谱(in situ DRIFTS of NO + O₂ co-adsorption)表明高的Pt分散度和高Pt⁰含量能够促进中间物种桥式硝酸盐的生成及分解,进而导致了优异的NO氧化活性。最后,利用同样方法将Pt的负载量降低至0.5% (w)制备催化剂,NO转化率仍达64%。这种制备方法能够获得低贵金属高性能的Pt基催化剂。     

Bimetallic CuCo Derived from Prussian Blue Analogue for Nonenzymatic Glucose Sensing

Bimetallic CuCo composites are prepared by calcinating copper hexacyanocobaltate precursor in N₂ atmosphere. The CuCo modified electrodes are fabricated for nonenzymatic glucose sensing in the alkaline electrolyte. The glucose can be directly electro-oxidized on the surface of the electrode catalyst mediated by the redox couples of Cu and Co. The optimal glucose sensor exhibits a high sensitivity (567 μA ⋅ mM⁻¹ ⋅ cm⁻²) in the range up to 825 μM with a detection limit of 3 μM and acceptable selectivity. The sensor can also be applied in serum samples. This work provides a facile and easily-scalable synthesis method of electrocatalysts for nonenzymatic glucose sensors.     

A Novel Carbon Nitride Nanosheets-based Electrochemical Sensor for Determination of Hydroxychloroquine in Pharmaceutical Formulation and Synthetic Urine Samples

This study introduces modified carbon paste electrodes with carbon nitride nanosheets (CNNS) and outlines their application for the determination of hydroxychloroquine sulfate (HCQ) in tablets and synthetic urine samples. CNNS were synthesized by hydrothermal route (200 °C, 10 h) using melamine and citric acid as their precursors. The carbon nitride nanosheets-based electrode (CNNS/E) presented a linear dynamic range for HCQ (LDR), ranging from 10.0 nmol l⁻¹ to 6.92 μmol l⁻¹, and detection (LOD) and quantification limits (LOQ) of 0.16 nmol l⁻¹ and 0.52 nmol l⁻¹, respectively. LOD and LOQ were calculated by the equations: LOD=3(S_d/b), and LOQ=10(S_d/b). The modified sensor presented excellent relative standard deviations for parameters such as repeatability (2.39 % and 1.87 %) and reproducibility (3.22 % and 2.32 %) in HCQ oxidation peaks (1 and 2). The CNNS/E has not shown significant variations in its anodic signal intensity in the presence of some organic and inorganic substances. It is worth bearing in mind that CNNS/E can be easily manufactured and the sensor has the lowest HCQ detection limits reported so far. The proposed sensor was successfully applied for HCQ determination in tablets and synthetic urine, showing good recovery values and an error of 0.60 % about comparative method in tablet samples, assuring the quality of the method.     

An Efficient Novel Electrochemical Sensor for Simultaneous Determination of Vitamin C and Aspirin Based on a PMR/Zn-Al LDH/GCE

A sensitive, low-cost, and simple electrochemical sensor based on Zn−Al layered double hydroxide (Zn−Al LDH) combined with a polymer film of methyl red (PMR) to modify a GCE has been created for the first time. Using cyclic voltammetry (CV), the electrochemical characteristics of the newly fabricated sensor were investigated. The characterised PMR/Zn−Al LDH/GCE shows high electro-catalytic activity towards the vitamin C (AA) and aspirin (ASA) oxidation. Schematic fabrication of PMR/Zn−Al LDH/GCE for the determination of AA or ASA was presented. The new sensor demonstrated superior analytical efficiency for the simultaneous identification of AA and ASA traces in well-spaced anodic peaks, even in the presence of certain intervening species. According to experimental results, the fabricated sensor represented two well-separated oxidation peaks for AA and ASA oxidation with potential difference of 799 mV (vs. Ag/AgCl). The linear dependences of the anodic peak currents of AA and ASA on their concentrations in the ranges of 0.10–53.17 μM are good. The detection limits of AA and ASA at the PMR/Zn−Al LDH/GCE were found to be 1.26 and 1.27 μM, respectively. Meanwhile, the quantification limits of AA and ASA were calculated as 4.21 and 4.25 μM, respectively. On other hand, the limit of detection (LODs) of AA and ASA oxidation were determined to be 0.47 and 0.21 μM, respectively, according to DPV method. The effect of scan rate (100 to 800 mV/s) on the anodic peak currents of AA and ASA was examined. A sensing model mechanism has been suggested and discussed in detail. Finally, the proposed sensor displayed a good reproducibility, stability and selectivity. The developed sensor was eventually used to successfully detect AA and ASA in urine samples.     

Voltammetric Analysis of Oxymetazoline Hydrochloride at Zeolite – Modified Carbon Paste Electrode in Micellar Medium

Simple, sensitive, accurate and inexpensive differential pulse (DPV) and square wave (SWV) voltammetric methods utilizing zeolite modified carbon paste electrode (ZMCPE) were developed for the determination of Oxymetazoline hydrochloride (OXM) in nasal drops. Various experimental parameters were optimized using cyclic voltammetry (CV). Calibration curves were linear over the concentration ranges 9.8×10⁻⁸–3.6×10⁻⁶ M and 9.8×10⁻⁶–9×10⁻⁵ M for DPV and SWV, respectively. The DPV method showed a limit of detection (LOD) of 1.04×10⁻⁷ M. The method was applied for the determination of OXM in pharmaceutical formulation with an average recovery of 101.18 % (%RSD=0.41, n=9).     

Determination of Paracetamol Based on 3-Amino-4H-1,2,4-triazole Coated Glassy Carbon Surface in Pharmaceutical Sample

In this present study, to determine paracetamol, an electroanalytical method is presented using differential pulse voltammetry (DPV) at 3-amino-4H-1,2,4-triazole (3AT) coated glassy carbon (GC) electrode. The electrochemical characterization and electron transfer behavior of this prepared electrode in the mixture of K₄[Fe(CN)₆]/K₃[Fe(CN)₆] contains 0.1 M KCl was confirmed by using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) methods. Furthermore, scanning electron microscopy (SEM) was used to observe morphological structures of the bare and modified surfaces. The effect of pH was studied on the redox reaction of paracetamol in phosphate buffer in the range of pH 3.0–9.0. The limit of detection was 0.043 μM (3 s/m) for 3AT-GC electrode. The developed electrode was successfully utilized in pharmaceutical samples.     

Recent advances in electrochemical sensors for antibiotics and their applications

The abuse of antibiotics will cause an increase of drug-resistant strains and environmental pollution,which in turn will affect human health.Therefore,it is important to develop effective detection techniques to determine the level of antibiotics contamination in various fields.Compared with traditional detection methods,electrochemical sensors have received extensive attention due to their advantages such as high sensitivity,low detection limit,and good selectivity.In this mini review,we summarized the latest developments and new trends in electrochemical sensors for antibiotics.Here,modification methods and materials of electrode are discussed.We also pay more attention to the practical applications of antibiotics electrochemical sensors in different fields.In addition,the existing problems and the future challenges ahead have been proposed.We hope that this review can provide new ideas for the development of electrochemical sensors for antibiotics in the future.     

基于改进的多轴差分吸收光谱层析技术的烟羽浓度峰重建

建立了被动多轴差分吸收光谱层析系统,实现烟羽气体的时空浓度分布测量,分别采用传统的同步迭代重建算法(SIRT)和改进的SIRT对测量数据进行了重建分析,克服了一些实际测试中不能获 取大量投影数据或投影分布不均匀、存在噪声的问题,精确地重建出大气痕量气体的二维空间分布．在不同的模型及评价指标下,通过数值模拟对两种重建算法的效果进行比较,改变改进的SIRT算法中的松弛因子,在5500次的迭代过程中,指标d从0.435降到了0.044,指标r从0.376降到了0.044,改进的SIRT算法具有更好的重建效果．外场重建试验中成功重建了大气痕量气体的二维空间．