手性奎宁-卟啉锰催化剂的合成及其催化性能

为了寻找催化活性、相转移活性和手性诱导为一体的卟啉配体[1-4],我们把卟啉和手性相转移源连结起来,用奎宁-卟啉化合物作配体[5],考察其锰 配合物为催化剂对烯烃环氧化反应的催化性能。奎宁-卟啉锰 配合物结构式如下:1　实验部分1.1　试剂和仪器苯乙烯和α-甲基苯乙烯在氮气保护下减压蒸馏处理。氧源ＮａＯＣｌ的浓度由碘量法测定。其余试剂均为化学纯,色谱标样环氧苯乙烯和α-甲基环氧苯乙烯按文献[6]方法合成。奎宁-卟啉配体按文献[5]合成。260-50型红外光谱仪,ＫＢｒ压片;ＵＶ-3000型紫外可见光谱仪,溶剂ＤＭＦ;ＭＴ-3型ＣＨＮ元素…     

Molecular structure of mixed adsorption layers surfactant—polymer at a liquid—liquid interface

Isotherms of the binding of dodecyl sulfate anions (DDS^–)and Na⁺ counterions during their coadsorption with a nonionic polymer. proxanol (PR). at the interface of dodecane-water emulsions have been measured by conductometry and Na-selective potentiometry. The adsorption of DDS^– and PR is concurrent. The affinity constant of PR to the interface determined by the Langmuir model decreases as the concentration of PR increases, and the surface concentration of DDS^– tends to a nonzero limiting value at high concentrations of PR. The surface (_o) and electrokinetic () potentials at the interface have been determined at various polymer concentrations by the spin probe and electrophoresis methods. The average dielectric permeability and density of polymer segments in We adsorption layer have been determined by ESR. The lower boundary of the hydrodynamic thickness of the polymer adsorption layer at the interface has been estimated from the dependences of _o and on the ionic strength.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1653–1661, July, 1996.     

Structure of Sol-Gel-Derived Sodium Dititanate Glass

The sodium dititanate, Na₂O·2TiO₂ glass was prepared by the sol-gel method. The structure of the glass, especially local environment of Ti⁴⁺ ions was examined using X-ray diffraction and X-ray absorption fine structure (XAFS) analyses, and was compared with that of the melt-derived glass with the same composition. It was found that Ti⁴⁺ ions are rather in five-fold coordination state, forming TiO₅ pyramids with one doubly bonded Ti=O in the gel-glass, while they were in lower coordination state or four-fold coordination in the melt-derived glass.     

锂离子电池正极材料LixNi1／3Mn1／3及电化学性能研究CO1／3O2的合成及电化学性能研究

应用以氢氧化物共沉淀为前驱体的高温固相烧结法合成LiNi1/3Mn1/3Co1/3O2正极材料，研究了沉淀温度及烧结过程锂盐投入量对该材料的结构和电化学性能的影响．结果表明，以室温（-20℃）下合成的氢氧化物为前驱体制备的LiNi1/3Mn1/3Co1/3O2具有较好的电化学性能．高温固相烧结会导致部分LiOH损失，因而在合成过程中需加入过量的氢氧化锂，实验表明Li1.08Ni1/3Mn1/3Co1/3O2材料的电化学性能最优．     

THE EFFECTS OF PERFUSION OF LATERAL VENTRICLE WITH CaCl_2 ON THE FEBRILE RESPONSE AND cAMP CONTENT IN PLASMA AND CEREBROSPINAL FLUID DURING LP-INDUCED FEVER

Artificial cerebrospinal fluid (c.s.f.) containing 40 mmol/L excess calcium was perfus-ed through the lateral ventricles of New Zealand white rabbits in order to reduce the Na~+/Ca~(++) ratio in the brain and the effects on both the febrile response and adenosine cyclic mo-nophosphate (cAMP) concentration in plasma and c.s.f, during leucocytic pyrogen (LP)-induced fever were observed. The results showed that cAMP concentration in c.s.f, increas-ed significantly during LP-induced fever while the cAMP level in Plasma remained unchang-ed, and the perfusion of artificial c.s,f, containing 40 mmol/L excess calcium can signif-icantly inhibit not only the febrile response but also the increase in c.s.f, cAMP level,while there appears no effect on plasma cAMP concentration, thus demonstrating that theincrease of Na~+/Ca~(++) ratio causing the increase of cAMP content in the brain may be anessential link in the pathogenesis of LP-induced fever.     

选择性氧化含氰基的对硝基苯硫醚

选择性氧化含氰基的对硝基苯硫醚岳国仁，王建华，张正（南京大学化学系南京２１０００８）关键词含氰基硫醚，选择性氧化，四水合过硼酸钠据报道［１］对硝基苯磺酰基乙腈的合成，反应时间长，可采用四水合过硼酸钠（ＮａＢＯ３·４Ｈ２Ｏ）作为氧化剂，受到重视［２，３...     

Hydrothermal synthesis of one-dimensional (1D) Na<Subscript>x</Subscript>TiO<Subscript>2</Subscript> nanostructures

Nanorods of sodium titanium dioxide bronze Na_xTiO₂ were synthesized by the hydrothermal treatment of the amorphous TiO₂·nH₂O gel with 10 M NaOH followed by ultrasonication in 0.1 M HCl and thermal treatment (500°C, 10 h). The thermal treatment of the nanorods does not change the morphology of the particles. According to the electron diffraction data, the Na_xTiO₂ nanorods grow along the c axis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 71–73, January, 2005.     

Biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyalkanoates) by metabolically engineered Escherichia coli strains

Biosynthesis of polyhydroxyalkanoates (PHAs) consisting of 3-hydroxyalkanoates (3HAs) of 4 to 10 carbon atoms was examined in metabolically engineered Escherichia coli strains. When the fadA and/or fadB mutant E. coli strains harboring the plasmid containing the Pseudomonas sp. 61-3 phaC2 gene and the Ralstonia eutropha phaAB genes were cultured in Luria-Bertani (LB) medium supplemented with 2 g/L of sodium decanoate, all the recombinant E. coli strains synthesized PHAs consisting of C4, C6, C8, and C10 monomer units. The monomer composition of PHA was dependent on the E. coli strain used. When the fadA mutant E. coli was employed, PHA containing up to 63 mol% of 3-hydroyhexanoate was produced. In fadB and fadAB mutant E. coli strains, 3-hydroxybutyrate (3HB) was efficiently incorporated into PHA up to 86 mol%. Cultivation of recombinant fadA and/or fadB mutant E. coli strains in LB medium containing 10 g/L of sodium gluconate and 2 g/L of sodium decanoate resulted in the production of PHA copolymer containing a very high fraction of 3HB up to 95 mol%. Since the material properties of PHA copolymer consisting of a large fraction of 3HB and a small fraction of medium-chain-length 3HA are similar to those of low-density polyethylene, recombinant E. coli strains constructed in this study should be useful for the production of PHAs suitable for various commercial applications.     

Synthesis and structure of Mn(II) and Zn(II) complexes containing 1,10-phenanthroline unit

The Mn(II) and Zn(II) complexes of N,N′-diisopropyl-1,10-phenanthroline-2,9-dimethanamine have been synthesised, and the structure of the two complexes have been studied by X-ray crystallography.     

Additive telluromolybdates. Structure and catalysis in oxidation

Additive telluromolybdates, MoO₃·2TeO₂ and M^IIO·TeO₂·MoO₃ (M^IITeMoO₆; M^II = Co, Mn, Zn), converted ethyl lactate selectively to pyruvate in a vaporphase fixedbed flow system at 250–300 °C. A synergy in activity was observed for binary TeO₂–MoO₃, and crystalline Te₂MoO₇ was suggested as the active species. The Rietveld analysis of powder XRD patterns of ternary CoTeMoO₆ revealed the layer structure quite different from that of the reference Te₂MoO₇, but tellurium was again located adjacent to molybdenum linked through lattice oxygen.