交替光谱辐照对叶用莴苣营养元素水平的影响

在人工光型植物工厂中采用深液流水培法栽培叶用莴苣,依托光谱时空分布可精准调控的智能LED光源系统,应用电感耦合等离子体原子发射光谱技术（ICP-AES）,研究了5 min,10 min,15 min,30 min,60 min,2 h,4 h和8 h等不同间隔的红、蓝光谱交替照射对叶用莴苣中K,P,Ca,Mg,Fe,Mn,Zn和Cu等8种营养元素吸收和累积的影响。结果表明：(1) 与同时照射模式相比,所有的交替光谱处理均显著提高了叶用莴苣地上部生物量,其中鲜重提高幅度约为18.6%~67.4%,干重提高幅度约为5.1%~88.0%;所有的交替红蓝光谱照射下叶用莴苣体内Mg,Fe和Zn元素的植株累积量均得到显著（p＜0.05）地提高;所有的红蓝交替光谱辐射处理均不同程度地降低了叶用莴苣植株中Ca元素含量。(2) 间隔为5 min的红蓝交替光谱辐射下莴苣植株Fe元素含量显著高于其他任意处理,较其他处理增加了38.87%~85.37%,高频次的红蓝光切换照射刺激了叶用莴苣植株对Fe元素的吸收。(3) 红蓝交替光谱辐射有利于提高叶用莴苣的能量利用效率,与红蓝同时供光的RB处理相比,所有交替处理均显著提高了叶用莴苣的光、电能利用率,提高幅度分别约为34.3%~87.5%和34.6%~87.9%;其中,间隔为4 h的红蓝交替光谱辐射下叶用莴苣植株的光、电能利用率均最大,分别为6.13%和2.01%,除间隔为5和10 min的红蓝交替光谱辐射处理外的其他交替光谱处理下的植株光、电能利用率均与处理间最大值无显著性差异。(4) 叶用莴苣对K和Mg两种元素的吸收在红蓝光交替间隔为10 min,15 min,60 min及4 h等多个处理下呈现拮抗现象。(5) R/B(30 m)处理下叶用莴苣中P,Ca,Fe和Mn等四种元素的含量水平均呈现处理间最低水平,其中P和Ca元素含量水平显著低于对照。     

分散固液微萃取在线热洗脱原子荧光法测定矿泉水中的痕量汞

研究制备了CI/SiO2/PDMS固相萃取剂,建立了分散固液微萃取在线热洗脱原子荧光联用测定矿泉水中痕量汞的方法。方法使用分散剂将CI/SiO2/PDMS均匀分散于样品溶液中,吸附并富集Hg2+与DDTC形成的Hg-DDTC螯合物。用磁子吸附收集固相萃取剂,并置于石英管中。利用电磁感应加热技术,在线加热洗脱,原子荧光法定量。方法的富集倍数达30倍,检出限为6.0ng/L;精密度RSD为3.8%(n=11,ρ=0.1μg/L)。     

聚乳酸/矿物填料复合材料的示差扫描量热研究

通过熔融共混法制备了一系列聚乳酸(PLA)/矿物填料复合材料.采用示差扫描量热(DSC)研究了含有碳酸钙(CaCO3)、蒙脱土(MMT)和凹凸棒土(AT)的聚乳酸复合材料在不同热历程中的结晶和熔融行为.研究发现,MMT和AT对PLA的慢速降温结晶无明显影响,而碳酸钙在慢速降温过程中能够有效促进PLA结晶;在2.5 K/min的降温速率下,结晶热焓随碳酸钙含量增加而增加;填料种类和含量会对复合材料升温过程的冷结晶和熔融产生较大影响,低含量矿物填料主要对PLA的冷结晶起成核作用,其中MMT成核效果最好.较高含量下不同填料会对PLA晶体形态产生影响,从而得到多样的DSC曲线变化.     

Quality Assessment of Honey Using Modern Analytical Tools

The quality of eighteen honey samples collected from the Western district of Saudi Arabia was assessed according to the International Honey regulatory standards using modern analytical methods. A number of quality criteria were measured to determine the botanical and geographical origin of honey. Hydroxymethylfurfural (HMF) as an adulteration marker was analyzed and detected quantitatively via high performance liquid chromatography (HPLC). The moisture content was assessed by Karl Fisher coulometric method using an automatic potentiometric titrator. While, mineral content and toxic heavy metal ions were determined using an inductively coupled plasma-atomic emission spectrometry (ICP-AES) technique after microwave digestion. All the investigated honey samples were of good quality. The elements with the highest frequency were K, Se, and Cd. High content of Cd and Se were found in samples (7 and 9). The maximum residues limit of the most dangerous metal for the human health lead was below European Standards.     

The Analysis of the Peat Content of Silt in River Water

River waters passing through peat wetlands can contain high concentrations of solids. Here, we outline simple laboratory methods by which the relative composition might be estimated with accuracy. Simple ashing of samples and the resultant weight loss is not appropriate as it includes analysis of all organic matter fragments/remains and these are also present in soils and silt. Differences in mineral content specific to the peat (quantified by powder x-ray diffraction) and the C:H composition (measured by microanalysis) were found to be reliable method of estimation of the ratio of peat to silt. These latter two methods show reasonable agreement.     

Dense packing properties of mineral admixtures in cementitious material

The effect of ultra-fine fly ash （UFFA）, steel slag （SS） and silica fume （SF） on packing density of binary, ternary and quaternary cementitious materials was studied in this paper in terms of minimum water requirement of cement. The influence of mineral admixtures on the relative density of pastes with low water/hinder ratios was analyzed and the relationship between paste density and compressive strength of the corresponding hardened mortars was discussed. The results indicate that the incorporation of mineral admixtures can effectively improve the packing density ofcementitious materials; the increase in packing density of a composite with incorporation of two or three kinds of mineral admixtures is even more obvious than that with only one mineral admixture. Moreover, an optimal amount of mineral admixture imparts to the mixture maximum packing density. The dense packing effect of a mineral admixture can increase the packing density of the resulting cementitious material and also the density of paste with low water/binder ratio, which evidently enhances the compressive strength of the hardened mortar.     

ICP-AES检测云南稻核心种质矿质元素含量的地带性特征

采用电感耦合等离子体原子发射光谱法(ICP-AES)测定了云南省5个稻作区16个州市的789份地方水稻糙米中的八种矿质元素, 该方法简单快速、灵敏度高、准确性好和多元素同时测定, 加标回收率为97.1%～110.2%, RSD为0.7%～4.4%。结果表明: 糙米元素含量(mg·kg-1)依次为P(3834.83±486.49)>K(2567.72±336.74)>Mg(2567.72±336.74)>Ca(153.67±55.90)>Zn(33.35±13.65)>Fe(32.08±25.51)>Cu(14.22±11.85)>Mn(13.58±3.22); 世界生物多样性最丰富及有色金属富集的滇西北糙米P含量高,早寒武纪动物群及磷矿富集的滇中糙米Ca,Mg,Fe和Zn含量高,作物多样性突出的滇西南糙米Cu和Mn含量高; 糙米高磷钾、中钙镁锰和低铁锌分布区是世界生物多样性最丰富及矿产资源富集区。首次提出云南糙米矿质元素含量的地带性特征与生物多样性中心、矿产资源富集区、生命起源及其山脉、河流有关;进一步推断地球矿质元素分布不均匀性及其山脉、河流的相互作用是生命起源的关键。文章研究为解决人类Fe,Zn和Ca等矿质营养不良和生命起源问题以及功能稻米育种生产提供参考。     

橙汁主要矿质元素含量的特征分析

矿质元素的含量与组成特征是评价橙汁品质与判断橙汁来源的重要指标。采用火焰原子吸收光谱法对我国重庆地区15个橙汁样品中钾,钙,钠,镁四种矿质元素的含量进行了测定,用箱线图和因子分析法对样品元素含量特征进行了分析。结果表明, 橙汁中钾元素含量最高(1 233.75～1 866.23 mg·L-1),其次为镁(77.51～167.15 mg·L-1)和钙(49.32～125.29 mg·L-1)元素,而钠元素含量最低(1.22～9.26 mg·L-1),该结果与欧盟果蔬汁工业协会(AIJN)提供的橙汁鉴伪与质量评价参考值范围基本一致;因子分析的结果表明,橙汁中钠元素含量的不同是区分冬橙与夏橙橙汁的主要因素。研究结果为我国橙汁品质评价、标准体系的建立及鉴伪研究提供了重要的基础数据。     

人工种植黄芩根、茎、叶、花、种子中营养元素的光谱分析

使用火焰原子吸收光谱法对人工种植黄芩的根、茎、叶、花、种子5个部位中的Ca,Cu,Fe,Mn,Zn,K六种矿物元素的含量进行了测定分析。结果表明,黄芩各部位均含有丰富的矿物元素,根中营养元素由高到低的顺序是为Ca>Fe>Cu>Mn>Zn>K,茎中的为Fe>Mn>Zn=Cu>K>Ca,叶中的为Fe>Mn>Zn>Cu>K>Ca,花中的为Ca>Fe>Mn>Zn>Cu>K,种子中的为Ca>Fe>Zn>Mn>Cu>K。研究认为人工种植黄芩茎、叶、花、种子中Fe, Mn, Zn含量皆较高,花和种子中还富含Ca, 根中富含Ca和Fe元素。     

辉石的拉曼光谱

由拉曼光谱仪测试巨晶普通辉石及包体中的顽火辉石、透辉石拉曼光谱,描述了谱图的位置、形态和相对强度,分析了振动模式,同时对相应的离子基团如非桥氧Si—O—,桥氧Si—O0,O—Si—O,M—O做了谱带归属。通过不同切片方向的谱带强度相对大小及某些谱带的缺失,初步研究了辉石族矿物晶体结晶学定向问题。