微液滴的非机械驱动

微液滴的非机械驱动是操纵微小尺雨液体流动的新方法。本文介绍当前有关微液滴非机械驱动的研究进展，包括：利用电化学方法产生并消耗表面活性分子来产生表面张力梯度；把表面浸润性梯度和温度梯度相结合；通过光敏化合物偶氮部分顺反异构的转换导致表面自由能的变化，最后由光照来驱动微液滴，以及利用固体基片上的亲水疏水条纹构建微芯片上实验室的液体非机械输送网络。     

基于ABAQUS的微细电火花超声振动主轴 仿真研究*

微细电火花技术凭借自身的特点和优势,在航空航天、医疗器械等领域发挥着重要的作用。超声振动辅助电火花加工在传统电火花加工中引入超声振动,加工精度和加工效率明显提高。作为核心部件,超声振动主轴的设计尤为重要。但传统设计过程,大大延长了研发周期和增加了成本,,因此,采用仿真方式进行研究具有重要的意义。本文对设计的微细电火花超声振动主轴的进行了仿真研究,通过ABAQUS进行了模态分析和谐响应分析,得到了超声振动主轴的谐振频率和输出振幅等参数。超声振动主轴的测试实验验证了仿真结果的正确性。     

Geometry dependence of the elongation behavior of a polypropylene melt through a micro die

A series of rheological experiments was performed for a polypropylene (PP) melt to explore its elongation behavior through a capillary die. Using an advanced twin-bore capillary rheometer with dies measuring 1.0, 0.5, and 0.25 mm in diameter, the experiments were performed at 210, 220, and 230 °C. The results indicated that the temperature of the PP melt had a significant effect on its extensional viscosity. The different decreases in the extensional viscosity values in the tested dies revealed the geometry dependence of the extensional viscosity. In the case of PP in the 0.25 mm die at 210 °C, the extensional viscosity values under different extensional strain rates were much higher than those in the other dies. Only in the 1.0 mm die did the relationship between the extensional viscosity of PP and its temperature obey the Arrhenius equation due to the larger die size which related to a slight size effect on its elongation behavior. The calculated deviations of the extensional viscosity in the tested dies demonstrated that the increasing pressure applied to the PP melt in the micro channel was related to the geometry dependence of the elongation behavior of the PP melt. The change in the extensional viscosity eventually relied on the interaction of the die geometry, the temperature, and the extensional stress of the PP melt.     

考虑二次梯度项及动边界的双重介质低渗透油藏流动分析

在传统试井模型的非线性偏微分方程中根据弱可压缩流体的假设,忽略了二次梯度项,对于低渗透油藏这种方法是有疑问的.低渗透问题一个显著的特点就是流体的流动边界随着时间不断向外扩展.为了更好地研究双重介质低渗透油藏中流体的流动问题,考虑了二次梯度项及活动边界的影响,同时考虑了低渗透油藏的非达西渗流特征,建立了双重介质低渗透油藏流动模型.采用Douglas-Jones预估-校正差分方法获得了无限大地层定产量生产时模型的数值解,分别讨论了不同参数变化时压力的变化规律及活动边界随时间的传播规律,还分析了考虑和忽略二次梯度项影响时模型数值解之间的差异随时间的变化规律,做出了典型压力曲线图版,这些结果可用于实际试井分析.     

Multi-scale finite element analyses of sheet metals by using SEM-EBSD measured crystallographic RVE models

In this study, two multi-scale analyses codes are newly developed by combining a homogenization algorithm and an elastic/crystalline viscoplastic finite element (FE) method (Nakamachi, E., 1988. A finite element simulation of the sheet metal forming process. Int. J. Numer. Meth. Eng. 25, 283–292; Nakamachi, E., Dong, X., 1996. Elastic/crystalline viscoplastic finite element analysis of dynamic deformation of sheet metal. Int. J. Computer-Aided Eng. Software 13, 308–326; Nakamachi, E., Dong, X., 1997. Study of texture effect on sheet failure in a limit dome height test by using elastic/crystalline viscoplastic finite element analysis. J. Appl. Mech. Trans. ASME(E) 64, 519–524; Nakamachi, E., 1998. Elastic/crystalline viscoplastic finite element modeling based on hardening–softening evaluation equation. In: Proc. of the 6th NUMIFORM, pp. 315–321; Nakamachi, E., Hiraiwa, K., Morimoto, H., Harimoto, M., 2000a. Elastic/crystalline viscoplastic finite element analyses of single- and poly-crystal sheet deformations and their experimental verification. Int. J. Plasticity 16, 1419–1441; Nakamachi, E., Xie, C.L., Harimoto, M., 2000b. Drawability assessment of BCC steel sheet by using elastic/crystalline viscoplastic finite element analyses. Int. J. Mech. Sci. 43, 631–652); (1) a “semi-implicit” finite element (FE) code and (2) a “dynamic explicit” FE code. These were applied to predict the plastic strain induced yield loci and the formability of sheet metal in the macro scale, and simultaneously the crystal texture and hardening evolutions in the micro scale. The isotropic and kinematical hardening laws are employed in the crystalline plasticity constitutive equation. For the multi-scale structure, two-scales are considered. One is a microscopic polycrystal structure and the other a macroscopic elastic plastic continuum. We measure crystal morphologies by using the SEM-EBSD apparatus with a unit of about 3.8 μm voxel, and define a three dimensional (3D) representative volume element (RVE) for the micro polycrystal structure, which satisfy the periodicity condition of crystal orientation distribution. A “micro” finite element modeling technique is newly established to minimize the total number of finite elements in the micro scale. Next, the “semi-implicit” crystallographic homogenization FE code, which employs the SEM-EBSD measured RVE, is applied to the 99.9% pure-iron uni-axial tensile problem to predict the texture evolution and the subsequent yield loci in the various strain paths. These “semi implicit” results reveal that the plastic strain induced anisotropy in the micro and macro levels can be predicted by our FE analyses. The kinematical hardening law leads a distinct plastic strain induced anisotropy. Our “dynamic-explicit” FE code is applied to simulate the limit dome height (LDH) test problem of the mild steel DQSK, the high strength steel HSLA and the aluminum alloy AL6022 sheet metals, which were adopted as the NUMISHEET2005 Benchmark sheet metals (Smith, L.M., Pourboghrat, F., Yoon, J.-W., Stoughton, T.B., 2005. NUMISHEET2005. In: Proc. of 6th Int. Conf. Numerical Simulation of 3D Sheet Metal Forming Processes, PART A and B(Benchmark), pp. 409–451) to estimate formability. The “dynamic explicit” results reveal that the initial crystal orientation distribution has a large affects to a plastic strain induced texture and anisotropic hardening evolutions and sheet formability.     

Studies of wall painting fragments from Kaiping Diaolou by SEM/EDX, micro Raman and FT-IR spectroscopy

The multi-technique analytical approach has proved to be a very effective tool for the analysis of artwork, as demonstrated by various studies. In this work, four micro-analysis methods were used to analyze the wall painting fragments in Kaiping Diaolou, a world cultural heritage enlisted in 2007. Field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray micro-analysis (EDX), combined with micro Raman and Fourier transform infrared (FT-IR) spectroscopy, provided a vast amount of information concerning the raw materials present in the pigments, organic binder, plasters and mortars of the wall painting. Four types of pigments (goethite, lazurite, chromium green and calcite) were identified on the surface layer of the wall paintings. The substrate under the pigment layer was found to be composed of cubic-like calcite (CaCO₃), micro-rod bundle-shaped syngenite (K₂Ca(SO₄)₂·H₂O), gypsum (CaSO₄·2H₂O) and silica (SiO₂). The organic binder can be attributed to animal glue (such as egg) and drying oil by micro FT-IR spectroscopy. These analysis results can provide important information for the conservation and restoration of the Kaiping Diaolou.     

一种微型FAIMS传感器芯片的研制

基于微机电系统(MEMS)技术,研制了一种微型高场非对称波形离子迁移谱(FAIMS)传感器芯片.芯片尺寸为18.8mm×12.4mm×1.2mm,由离子化区、迁移区、离子检测区组成.采用真空紫外灯离子源在大气压环境下对样品进行离子化,经过离子化区中聚焦电极的电场作用,实现离子在进入迁移区之前的聚焦,提高离子信号的强度.通过在上下玻璃上溅射Au/Cr(300nm/30nm)金属,并与厚度为200μm、采用感应耦合等离子体(ICP)工艺刻蚀的硅片键合,形成迁移区的矩形通道,尺寸为10mm×5mm×0.2mm.离子检测区为三排直径200μm、间距100μm交错排列的圆柱阵列式微法拉第筒,能同时检测正负离子.采用频率为2MHz,最大电压为364V,占空比为30%的高场非对称方波电压进行FAIMS芯片实验.以丙酮和甲苯为实验样品,载气流速80L·h-1,补偿电压从-10V到3V以0.1V的步长进行扫描,得到了丙酮和甲苯的FAIMS谱图,验证了FAIMS芯片的性能.丙酮和甲苯的FAIMS-MS实验进一步表明FAIMS系统实现了离子分离和过滤功能.     

用于生物单分子操纵的磁镊技术

镊是近年发展起来的一种用于生命科学研究领域的微操纵技术.简要介绍了所搭建的磁镊装置及利用2.8μm直径的磁珠进行的操纵实验;利用一种搜索算法分析所记录的磁珠运动视频,得出磁珠的运动轨迹和运动速度,并与理论分析相验证.研究结果表明该磁镊装置具有一定的实用性.