Synthesis and property of diazocine derivatives substituted with imidazole in various positions

ABSTRACT

TIACA-I, TIACA-II were synthesized by changing the substitution position of the imidazole group in the diazocine core. TIACA-I, TIACA-II in the film state showed absorption in the range of 354 to 392 nm and exhibited blue photoluminescence (PL) emissions at 448 and 462 nm, respectively. The PL wavelength of TIACA-II is red-shifted by 14 nm than that of TIACA-I due to the electron-donating intensity depending on the position of the imidazole group. The use of TIACA-II in a non-doped OLED device resulted in blue emission with current efficiency of 2.84 cd/A and CIE of (0.15, 0.18).     

Concepts of photochemical damage of Photosystem II and the role of excessive excitation

Photoinhibition is one of the most controversial topics in photophysiology. Well into the 21 st century, scientists have not agreed on the mechanism of action, primary site, and roles of excess energy absorbed by photosynthetic pigments. It is recognized that Photosystem II is the most fragile component during photoinhibition and that excess excitation absorbed by the photosynthetic pigments has a strong impact on it. Consensus is yet to come on terminology, guidelines to study photoinhibition, or boundaries of what can be considered photodamage. Some of these controversies are the result of how we understand the phenomenon of photoinhibition, as this is what determines a given experimental design. Thus, how we understand photodamage depends on the philosophical approach of each group. While some efforts have been made in the parametrization of Photosystem II photoinhibition, an updated review about the concepts of photoinhibition of Photosystem II and how to study it is still pending. In this work, a review of the concepts used in the field of photoinhibition is presented, accompanied by a synopsis on the history and mechanisms of action.     

Blue-phase liquid crystal display with insulating protrusion

In order to lower the saturation voltage and enhance the transmittance of in-plane switching blue-phase liquid crystal display (IPS-BPLCD), IPS-BPLCD with insulating protrusion is proposed. The single-protrusion (only set on the top of pixel electrode) and double-protrusion (set on the top of pixel and common electrodes) structures are investigated in this work. The potential distribution changes when the protrusion is used. There is a thicker transverse electric field in BPLC range, because the stronger electric field at the edges of the electrodes is decentralised into BPLC range. As a result, the saturation voltage is reduced from 36.3 V to 28.9 V when the double-protrusion structure is used, and transmittance is increased by ~20%. The contrast ratio is larger than 1000:1 in 60° viewing cone using a half-wave biaxial film. Both single-protrusion and double-protrusion structures have the uniform gamma curves at large oblique viewing angles. Moreover, the off-axis image distortion index is 0.1590 at 60º polar angle when zigzag electrodes are used.     

A multifunctional blue phase liquid crystal lens based on multi-electrode structure

A blue phase liquid crystal (BPLC) lens with multifunction using multi-electrode structure and a dielectric layer with high dielectric constant is proposed. The refractive index of the BPLC can be changed flexibly in different regions. Some functional or technical requirements such as switch between positive and negative lenses can be achieved. The lens reveals a good parabolic refractive index distribution and focus adjustment capacity simultaneously. The applied voltage on the electrodes is regular and computable. To decrease the applied voltage of the proposed lens with a large diameter, a drive-type adopted Fresnel lens is introduced.     

Solar Light Induced Photocatalytic Degradation of Pollutants over Titania Pillared Zirconium Phosphate and Titanium Phosphate

Titania pillared zirconium phosphate (ZrP) and titanium phosphate (TiP) were prepared by intercalating Ti (IV) isopropoxide sol in the interlayers of the mono sodium form of the corresponding metal phosphate. The sol-intercalated samples were activated at various temperatures and characterized by XRD, UV–vis DRS, FTIR, BET-surface area, BJH-pore size distribution and acid sites measurement. Basal spacing and surface area analyses revealed that highest amount of pillaring has taken place with 2 and 4 wt.% titania loading for ZrP and TiP, respectively. The photocatalytic degradation of 4-nitrophenol (4-NP), phenol, methylene blue (MB) and hexavalent chromium (Cr (VI)) was studied in aqueous solution over the neat as well as pillared materials under solar irradiation. Catalytic activity tests revealed that hexavalent chromium (Cr (VI)) and 4-nitrophenol (4-NP) were completely degraded under acidic conditions, whereas, the same was observed in almost neutral conditions for phenol and methylene blue (MB) over 0.6 g/L of catalyst.

Kinetic study of the decomposition of Prussian Blue electrocatalytic layer during cathodic reduction of hydrogen peroxide

Kinetic study on the decomposition of Prussian Blue electrocatalytic layer during electrochemical reduction of hydrogen peroxide has been studied in relation to biosensor application of this electrocatalyst. The decomposition has been shown to proceed as a nearly exponential decay process and the corresponding first-order rate coefficients were determined. It has been shown that the decomposition proceeds about 10 times faster in pH 7.3 buffer solution as compared to pH 5.5 buffer. A linear dependence of the decomposition rate on the concentration of hydrogen peroxide has been found.      

Novel cyclopenta[def]phenanthrene based blue emitting oligomers for OLEDs

Novel blue emitters, oligo-MCPPs (tri-MCPP, tetra-MCPP, and penta-MCPP), have been synthesized and characterized. The introduction of cyclopenta[def]phenanthrene (CPP) units into the structure of oligo-MCPPs gave LEDs with high efficiency and pure blue emission. UV-visible absorption spectra of the thin films of these compounds appear at 333-354 nm, and their maximum PL emission at 416-447 nm. Multilayer organic EL devices with oligo-MCPPs as an emitting layer showed the turn-on voltage of about 4.8 V, the maximum brightness of 1076 cd/m² (at 8.2 V), the maximum luminescence efficiency of 0.81 cd/A, and the CIE coordinates of (0.17, 0.14) with blue color.     

Zinc oxide nanoparticles synthesized using Oldenlandia Umbellata leaf extract and their photocatalytic and biological characteristics

The aim of this study was to examine the environmentally friendly green production of zinc oxide nanoparticles (ZnO NPs) utilizing Oldenlandia Umbellata (OU) leaves extract, as well as to study the photo catalytic and biological activities of these particles. XRD, UV-Visible, FT-IR, SEM, EDAX, TEM and Zeta potential studies were used to investigate the purity and properties of as synthesized ZnO NPs. From the FT-IR investigations presenting functional groups were verified. The hexagonal form and wurtzite crystal nature were confirmed by SEM and XRD photographs. The decreasing zeta potential of ?23.7 mV suggested the stability of OU-ZnO NPs, which was validated by Zeta potential and EDAX measurements. The OU-ZnO NPs' photo catalytic activity was also examined using their methylene red dye degradation potential. It also has a DPPH test that revealed it had a 66% radical scavenging activity. Furthermore, this substance was proven to be an effective anti-fungal agent against Candida albicans, which demonstrated a maximum mycelial inhibition of 12.5 ± 0.7. Additionally, the biosynthesized nanoparticles had high antibacterial activity verses all of the microbiological strains tested to varying degrees.     

Efficient removal of MB dye using litchi leaves powder adsorbent: Isotherm and kinetic studies

Removal of Methylene Blue (MB) dye using Litchi Leaves Powder (LLP) material was carried out in batch mode. Effect of the mass of the adsorbent (0.1–2.5 g/L), pH of the solution (2−12), starting concentration of MB dye (50–150 mg/L), ionic strength using NaCl (0.1–0.5 M) as an electrolyte, contact time (0–60 min) on the adsorption of MB dye was studied. To calculate pH at which LLP material surface becomes neutral point of zero charge (pH_pzc) is also determined and found to be 6.48. Removal process best fit in the pseudo-second-order kinetic model as indicated by its higher R² value (0.999). Isotherm models (Freundlich and Langmuir) were fitted to the data obtained from the experiment to understand the adsorption behaviour. Result shows that experimental data were fitted to the both isotherm models (Freundlich and Langmuir) as indicated by higher R² value for both Freundlich (0.991) and Langmuir (0.994) model, and it was determined that LLP has a maximum adsorption capacity of 119.76 mg/g.