CBP/Alq3有机量子阱结构的光致发光

采用多源有机分子气相沉积系统(OMBD)制备了CBP/Alq₃有机多量子阱结构,利用电化学循环伏安特性和吸收光谱、小角X射线衍射、荧光光谱研究了量子阱的能带、结构和光致发光的特性。电化学循环伏安特性和吸收光谱的测量结果表明,CBP的最低占据分子轨道(LUMO)与最高占据分子轨道(HOMO)的位置分别为-2.74,-6.00eV,Alq₃的LUMO与HOMO的位置分别为-3.10,-5.80eV,所以CBP/Alq₃有机量子阱为Ⅰ型量子阱结构。小角X衍射测量显示,在小角的位置(2θ的范围在0°～3°)观察到了对应于量子阱结构的多级布拉格衍射峰,表明多层量子阱结构是有序的层状结构,界面比较完整,界面质量比较好。荧光光谱的研究结果表明,Ⅰ型量子阱结构可以有效地把能量从垒层传递给阱层,从而增强了阱层材料的发光。阱层的厚度对发光峰的位置影响很大,随阱层厚度减小,阱层材料的发光峰出现蓝移现象。并对引起发光峰蓝移的原因进行了讨论。     

两种蓝色有机电致发光材料

重点研究以两种蓝色OEL材料蒽类衍生物JBEM和联苯乙烯衍生物DPVBi分别作基质，以perylene作掺杂剂的器件的电致发光性能，特别研究了它稳定性，在这度和效率方面，两种器件并没有很大差别，然而在稳定性方面却有很大差别，蒽类衍生物JBEM的器件在100cd/m^2初始亮度下，半亮度寿命可达1035h，而DPVBi的器件在同样条件下，半亮度寿命为255h。通过分析两种器件的能级图，认为稳定性的差别可能源于两种蓝光材料本身的热稳定性不同，JBEM优于DPVBi，是一种很有前途的蓝色发光材料。     

掺杂型红色有机电致发光显示器件

全色显示是有机电致发光显示(OLED)器件发展的目标,而高性能红色发光器件一直是制约全彩色OLED器件实用化的瓶颈,也是目前有机电致发光显示研究的热点。制作了掺杂DCJTB和不同浓度的rubrene两种荧光染料的红色有机电致发光显示器件,以NPB和Alq₃分别作为空穴传输层和电子传输层,发现器件性能与只掺杂DCJTB的器件相比有明显提高,发光效率提高到2～3倍。通过Frster理论和能带理论分析了器件的能量转移机理,研究发现Frster能量转移不是掺杂器件能量转移的主要形式,载流子俘获机制才是器件效率提高的主要原因;rubrene的引入使得能量能够更有效地从Alq₃转移到DCJTB,从而显著地提高了器件的发光效率和性能。     

The effect of ITO films thickness on the properties of flexible organic light emitting diode

Indium tin oxide (ITO) thin films were deposited on cyclic olefin copolymer substrate at room temperature by an inverse target sputtering system. The crystal structure and the surface morphology of the deposited ITO films were examined by X-ray diffraction and atomic force microscopy, separately. The electrical properties of the conductive films were explored by four-point probing. Visible spectrometer was used to measure the optical properties of ITO-coated films. The performance of the flexible organic light emitting diode device with different thickness anode was investigated in this study.     

Holographic interferometry as electrochemical emission spectroscopy of a carbon steel in 5–20 ppm TROS C-70 inhibited seawater

In the present investigation, holographic interferometry was utilized for the first time to determine the rate change of the number of the fringe evolutions during the corrosion test of a carbon steel in blank seawater and seawater with different concentrations of a corrosion inhibitor. In other words, the anodic dissolution behaviors (corrosion) of the carbon steel were determined simultaneously by holographic interferometry, as an electromagnetic method, and by the electrochemical impedance (EI) spectroscopy, as an electronic method. So, the abrupt rate change of the number of the fringe evolutions during corrosion tests, EI spectroscopy, of the carbon steel is called electrochemical emission spectroscopy. The corrosion process of the steel samples was carried out in blank seawater and seawater with different concentrations, 5–20 ppm, of TROS C-70 corrosion inhibitor using the EI spectroscopy method, at room temperature. The electrochemical-emission spectra of the carbon steel in different solutions represent a detailed picture of the rate change of the anodic dissolution of the steel throughout the corrosion processes. Furthermore, the optical interferometry data of the carbon steel were compared to the data, which was obtained from the EI. spectroscopy. Consequently, holographic interferometry is found very useful for monitoring the anodic dissolution behaviors of metals, in which the number of the fringe evolutions of the steel samples can be determined in situ.     

Study of the spontaneous formation of organic layers on carbon and metal surfaces from diazonium salts

This study investigates the spontaneous grafting of different para-substituted phenyl groups on carbon and metallic surfaces from diazonium salts solutions. Glassy carbon, nickel, zinc and iron plates were allowed to react with an acetonitrile solution of aryldiazonium tetrafluoroborate salt by simple dipping. The surfaces were characterized before and after their immersion by XPS and AFM to evidence the formation of a coating on the different materials. The results are indicative of the presence of substituted phenyl groups on all the investigated surfaces. This study also aims at correlating grafting efficiency with metal reactivities and diazonium salt electronic properties by means of AFM and FT-IRRAS. For this purpose, zinc and nickel were chosen due to their opposite reducing properties and two diazonium salts were selected with electron-donor or -withdrawing para-substituents. The results tend to indicate that redox properties of both partners (diazonium + metal) are of prime importance for grafting to occur.     

偶氮苯衍生物三阶非线性的四波混频研究

用皮秒Ｎｄ：ＹＡＧ激光器的倍频光（５３２ｎｍ）对具有离域π－共轭电子云结构的偶氮苯类样品材料作简并四波混频补给，测得三阶非线性电极化率ｘ＾（３）和它们的时间响应分别为１０＾－９ｅｓｕ和２０ｐｓ，并对影响ｘ＾（３）的瞬时光栅作用和ｘ＾（３）的响应时间人了讨论。     

Flaked capillary columns with crown ether complexes for gas-liquid chromatography

Flaked capillary columns with an OV-101/CE-Na{in3}PO{in4} hydrophobic-hydrophilic sorbent have been suggested. This sorbent provides for the analysis of polar and nonpolar substances, including amines and aminoalcohols, in aqueous and organic solvents. The efficiency of new columns was demonstrated for the analysis of 25 organic substances of various classes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2169–2173, December, 1994.The work was financially supported by the Russian Foundation for Basic Research, Project No. 93-03-4969.