Glass capillary columns for separation of free organic acids

Glass capillary columns have been prepared without acidic additive in the stationary phase, from which free organic acids elute as sharp and symmetrical peaks. The required surface in the borosilicate glass capillary was generated by a combination of leaching with aqueous HCl and deposition of colloidal silica particles; it can be coated with stationary phases have a broad range of polarity. Aqueous samples containing free organic acids can also be analyzed in such columns in an isothermal mode.     

Untersuchungen zurFriesschen Verschiebung von Estern derortho- undpara-Methoxybenzoesäure

TheFries rearrangement of different methoxy benzoates has been investigated. Frompara-methoxy benzoates the corresponding hydroxy-4-methoxy benzophenones could be obtained in good yields by treatment withLewis acids (especially TiCl₄) in nitromethane at 20°C (4-hydroxy derivatives) or without solvent at 120°C (2-hydroxy derivatives). Under the same conditions only demethylation occurs withortho-methoxy benzoates leading to the corresponding salicylates. Small amounts of hydroxy-2-methoxy benzophenones were obtained by treatment with polyphosphoric acid.

     

Separation and determination of aluminium by single-column ion-chromatography

A quick, reliable method for the determination of Al(III) in the presence of other metal ions is presented. A Chromatographic system consisting of a low-capacity cation-exchange column, an eluent of diprotonated p-phenylenediamine, and a conductivity detector was used to measure the retention times for various cations. During the course of this work, it was found that Al(III) was eluted later than most bivalent metal ions but earlier than other tervalent metal ions. Therefore the concentration of eluent was adjusted so that an early sharp peak was obtained for Al(III) and the bivalent metal ions were eluted as a group. Through analysis of an NBS standard, as well as of solutions containing Al(III) and other metal ions, the method was shown to be precise, accurate and rapid for determination of Al(III) without interference from common bivalent metal ions.     

Polychloroprene rubbers used for adhesives: a small angle X-ray scattering preliminary investigation under stretching

Summary Three types of polychloroprene rubbers (Du Pont de Nemours Co. Neoprenes AD, WHV and W) used for adhesives and having different crystallization rates have been investigated.The mechanical properties of the Neoprenes samples were determined and the films were examined under stretching by SAXS for a preliminary investigation on their different superreticular order.

---

Zusammenfassung Drei Typen von Polychloropren-Kautschuk mit verschiedener Kristallisationsgeschwindigkeit (Neoprene AD, WHV und W von Du Pont de Nemours), die als Klebemittel dienen, wurden als gedehnte Filme mechanisch und röntgenographisch (SAXS) untersucht. Sie zeigen Unterschiede in der Überstruktur.

     

Is it safe to have a laboratory test?

A recent US Institute of Medicine report indicated that up to 98,000 deaths and more than 1 million injuries occur each year in the United States due to medical errors. These include diagnostic errors, such as an error or delay in diagnosis, failure to employ indicated tests and the use of outmoded tests. Laboratory tests provide up to 80% of the information used by physicians to make important medical decisions, therefore it is important to determine how often laboratory testing mistakes occur, whether they cause patient harm, where they are most likely to occur in the testing process, and how to prevent them from occurring. A review of the literature and a US Quality Institute Conference in 2003 indicates that errors in laboratory medicine occur most often in the pre-analytical and post-analytical steps in the testing process, but most of the quality improvement efforts focus on improving the analytical process. Measures must be developed and employed to reduce the potential for mistakes in laboratory medicine, including better indicators for the quality of laboratory service. Users of laboratory services must be linked with the laboratorys information system to assist them with decisions about test ordering, patient preparation, and test interpretation. Quality assessment efforts need to be expanded beyond external quality assessment programs to encompass the detection of non-analytical mistakes and improving communication between the users of and providers of laboratory services. The actual number of mistakes in laboratory testing is not fully recognized, because no widespread process is in place to either determine how often mistakes occur or to systematically eliminate sources of error. We also tend to focus on mistakes that result in adverse events, not the near misses that cause no observable harm. The users of laboratory services must become aware of where testing mistakes can occur and actively participate in designing processes to prevent mistakes. Most importantly, healthcare institutions need to adopt a culture of safety, which is implemented at all levels of the organization. This includes establishing closer links between providers of laboratory services and others in the healthcare delivery system. This was the theme of a 2003 Quality Institute Conference aimed at making the laboratory a key partner in patient safety. Plans to create a permanent public–private partnership, called the Institute for Quality in Laboratory Medicine, whose mission is to promote improvements in the use of laboratory tests and laboratory services are underway.Presented at the 9th Conference on Quality in the Spotlight, 18–19 March 2004, Antwerp, Belgium.     

On the configuration interaction method for singlet states

The direct CI method, which avoids explicit calculation of the Hamiltonian matrix, is presented in a new form. The method is linked with Davidson's algorithm for iterative evaluation of the ground state eigenvector. The viability of the method is indicated by the test calculations on water which are described.     

STUDIES ON PREPARATION OF INACTIVATED VACCINES FROM CELL CULTURES OF MINK ENTERITIS VIRUS (MEV) AND THEIR IMMUNITY

In this paper, superhigh reproductive rate strains of MEV with titre more than HA8192* or TCID50 log9.7 10 have been achieved both by cultivation in cell lines with different susceptibility to MEV and by isolating and identifying in field by the author. The systematic tests proved that S18 and L12 strains of MEV are the best strains for vaccine preparation. In this study, the best means for the tissue cultivation of MEV and the most advanced technological process for the production and detection of serum-free cell-cultured MEV fluids with super-high HA titre in batches in large quantities have been established for the first time. Optimum conditions for MEV inactivation were determined, and safe and effective inactivated vaccines with mineral oil or A1(OH)3 gel adjuvant were successfully prepared with serum-free cell-cultured MEV fluids. Both vaccines with different adjuvants can be manufactured in batches in large quantities and have been widely used all over China since 1986. The change laws of the imm     

Synthesis and electrochemical properties of Zn3V3O8 as novel anode material

Zn₃V₃O₈ two-dimensional micro sheets are successfully synthesized by combination of solvothermal method and heat treatment. The Zn₃V₃O₈ has better electrochemical performances after calcinations.     

The identification of tricyclic neuroleptics and sulphonamides by high-performance thin-layer chromatography

Circular high-performance thin-layer chromatography (HPTLC) has been used to differentiate a series of twelve tricyclic neuroleptics, using both normal phase and reverse phase procedures. The use of normal phase systems also allows the resolution of geometric isomers of chlorprothixene, clopenthixol and flupenthixol. Thirteen sulphonamides and Trirnethoprim may also be distinguished using HPTLC.     

Determination of cobalt by pyrogallol chemiluminescence

The chemiluminescence reaction involving pyrogallol in alkaline hydrogen peroxide solution is described. With reaction conditions selected for the determination of Co(II), the detection limit for Co(II) was at least two orders of magnitude below the detection limit of all other species tested. The results suggest that Ca, Mg, Mn, and Fe are the most likely interferents for environmental and biological samples. The log-log calibration graph for Co(II) is linear from a detection limit of 0.5 ng/ml up to 10 microg/ml.