Ionic conductivity of poly[N-(3,6,9-trioxadecyl)-4-vinylpyridinium)] salts with univalent counter-ions in aqueous solutions

In order to determine the counter-anion effect on conductivity of poly[N-(3,6,9-trioxadecyl)-4-vinylpyridinium)] backbone in aqueous solutions, a set of three polyelectrolytes with three different counter-ions: poly[N-(3,6,9-trioxadecyl)-4-vinylpyridinium]bromide P4VP164Br and its chlorate and tosylate derivatives P4VP164ClO₄ and P4VP164Ts respectively, were prepared by spontaneous polymerization of 4-vinylpyridine. This method gives a grafted polyelectrolyte having a positive charge on each pyridinic moiety on the backbone. The conductivities of cationic polyelectrolyte aqueous solution were determined in the concentration range from 10⁻⁴ to 10⁻² M at 25 °C. The variation of the conductivity versus concentration of the investigated system exhibits a typical polyelectrolyte behavior. The polycation mobility was found to be dependent on the counter-anion nature. Thus, the polyelectrolyte conductivity increases with the ion size. This shows that big ions are weakly or not associated to the backbone.In order to confirm this steric hindrance, we have considered the conductivities of these three anions Br⁻, ClO₄⁻ and Ts⁻ in their sodium salts, both alone and in the presence of 3,6,9-trioxadecanol (PEO164) free chains. In the two cases, the conductivities decrease in the order Λ_Br>Λ_ClO4>Λ_Ts.These results suggest that counter-ion mobility is mainly influenced by steric effect PEO164 grafted chains.Values of the conductivity predicted from Manning rod-like polyelectrolyte model were compared with our experimental results.     

The photogalvanic effect of Fe(II)-β-diketonate/thionine systems in aqueous acetonitrile

Summary The photogalvanic effect of ferrousbis-(acetylacetonate) (Fe(II)(acac)₂) and ferrousbis-(trifluoroacetylacetonate) (Fe(II)(tfac)₂) complexes in aqueous acetonitrile thionine dye solutions has been studied in a photogalvanic cell of 70 cm³ capacity with identical platinum electrodes (area: 0.25 cm²) using visible light (80 mW/cm²) at 25°C. The theoretical Sunlight Engineering Efficiency (SEE) was determined for both complexes and it was found that the best SEE was obtained when Fe(II)(tfac)₂ was used at a concentration of 1.5×10^–4 mol/dm³ with a thionine concentration of 1×10^–4 mol/dm³ atpH=4 in 40% aqueous acetonitrile. Effects of incident light intensity and temperature on the photogalvanic performance and the action spectrum of the present system were also investigated. A mechanism of the photoredox reaction between the Fe(II)-complex and the dye molecule is proposed.

---

Der photogalvanische Effekt von Fe(II)--Diketonat/Thionin-Systemen in wäßrigem Acetonitril

Zusammenfassung Der photogalvanische Effekt von Eisen(II)-bis-(acetonylacetonat) (Fe(II)(acac)₂) und Eisen(II)-bis-(trifluoracetylacetonat) (Fe(II)(tfac)₂ in wäßriger acetonitrilischer Thioninlösung wurde in einer photogalvanischen Zelle (70 cm³) mit identischen Platinelektroden (Fläche: 0.25 cm²) mit sichtbarem Licht (80 mW/cm²) bei 25°C untersucht. Für beide Komplexe wurde die theoretische Sunlight Engineering Efficiency (SEE) bestimmt; der beste SEE-Wert wurde für Fe(II)(tfac)₂ bei einer Konzentration von 1.5×10^–4 mol/dm³ beipH=4 in 40%igem Acetonitril gefunden (Thioninkonzentration: 1.0×10^–4 mol/dm³). Effekte, die durch Änderung der Lichtintensität und der Temperatur hervorgerufen werden, werden diskutiert. Ein Mechanismus für die Photoredoxreaktion zwischen dem Fe(II)-Komplex und dem Farbstoffmolekül wird vorgeschlagen.

     

分散固相萃取净化-超高效液相色谱-串联质谱法同时测定鱼和虾中抗生素及三苯甲烷类兽药残留

建立了分散固相萃取净化-超高效液相色谱-串联质谱法快速测定鱼和虾中3类（磺胺类、喹诺酮类、氯霉素类）18种抗生素及2种三苯甲烷类（孔雀石绿、隐色孔雀石绿）兽药残留。样品经磷酸氢二钾溶液水解分散，乙腈提取，提取液经氯化钠脱水、盐析后取乙腈层，经旋转蒸发仪浓缩至近干，残留物用甲醇定容至1.0 mL，C18和PSA（N-丙基乙二胺）填料分散固相萃取净化，过滤膜后经ZORBAX C18色谱柱（50 mm×2.1 mm，1.8 μm）分离，正、负离子多反应监测模式采集数据，同位素内标法定量。实验结果表明，20种兽药在0.2~300 μg/L范围内具有良好的线性关系，检出限为0.1~0.6 μg/kg，定量限为0.3~1.8 μg/kg，相关系数均大于0.99。在1、5和20倍定量限加标浓度水平下，平均回收率为72.5%~118%，相对标准偏差（RSD）为1.9%~9.8%。该方法具有前处理简单、检测效率高、成本低等优点，适用于鱼和虾中多类兽药残留的同时测定。     

Solvent-free microwave extraction of essential oil from aromatic herbs: comparison with conventional hydro-distillation

Solvent-free microwave extraction (SFME) is a combination of microwave heating and dry distillation, performed at atmospheric pressure without added any solvent or water. Isolation and concentration of volatile compounds are performed by a single stage. SFME has been compared with a conventional technique, hydro-distillation (HD), for the extraction of essential oil from three aromatic herbs: basil (Ocimum basilicum L.), garden mint (Mentha crispa L.), and thyme (Thymus vulgaris L.). The essential oils extracted by SFME for 30min were quantitatively (yield) and qualitatively (aromatic profile) similar to those obtained by conventional hydro-distillation for 4.5 h. The SFME method yields an essential oil with higher amounts of more valuable oxygenated compounds, and allows substantial savings of costs, in terms of time, energy and plant material. SFME is a green technology and appears as a good alternative for the extraction of essential oils from aromatic plants.     

Azocalixarenes: Synthesis, Characterization, Complexation, Extraction, Absorption Properties and Thermal Behaviours

Azocalixarenes, which have a conjugated chromophore azo (–N=N–) group in p-positions, are synthesized in “one-pot” procedures in satisfactory yields. Their structures in the solid and solution are elucidated by UV–vis, FT-IR, ¹H and ¹³C NMR spectroscopic methods as well as elemental analysis techniques. Some of them are complexed with metal ions (alkali, alkaline-earth and transition metal ions) under neutral conditions. A wide variety of applications is expected by the functionalization of the side arms. The selective liquid–liquid extraction of various alkali, alkaline-earth and transition metal cations from the aqueous phase to the organic phase is carried out by using azocalixarenes. Furthermore, the synthesized azocalixarenes are utilized for selective extraction of Fe³⁺ cations from the aqueous phase to the organic phase. The effects of varying pH and solvent upon the absorption ability of azocalixarenes substituted with electron-donating and electron-withdrawing groups at their o-, m-, p-positions are examined. The thermal behaviours of azocalixarenes containing upper rim functionalized groups are investigated by means of thermogravimetry (TG), differential thermal analysis (DTA) and differential thermogravimetry (DTG).     

Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

Large-area microwave and radiofrequency plasma etching of polymers

We have investigated O₂/CF₄ plasma etching of five commercial polymers: polyimide, polyamide, polyethylene terephthalate, polycarbonate and cured epoxy resin. A new large-area microwave plasma apparatus has been used in this work, but the same apparatus can also be used as a capacitively coupled radiofrequency (13.56 MHz) discharge reactor. The effect of operating parameters such as pressure, etchant gas composition, excitation frequency and sample temperature upon etch kinetics has been examined. We have observed distinct maxima in the etch rate as functions of pressure and CF₄ concentration. Activation, energies evaluated from the Arrhenius plots fall in the range 0.04-0.2 eV, in agreement with data in the literature. Dry etch susceptibility of a given polymer correlates strongly with the degree of unsaturation in the polymer's structure     

Needle-like calcium carbonate assisted self-assembly of mesostructured hollow silica nanotubes

Mesostructured hollow silica nanotubes (MHSNTs) were successfully produced via the self-assembly of C₁₆TMABr and silica species on the surface of needle-like calcium carbonate nanoparticles in an alkaline medium at room temperature. The characterization of MHSNTs by transmission electron microscopy (TEM), scanning electron microscopy (SEM), pore size distribution (PSD) and Brunauer-Emmett-Teller (BET) indicated that MHSNTs had uniform tubular hollow structures with big openings, a length of 1.5-2.0 μm, an inner diameter of 150-200 nm at the open end and 50-60 nm at the closed end, and a wall thickness of 20-30 nm, as well as a narrow PSD around 2.3 nm in the shells and a BET surface area as high as ∼975.3 m²/g. By small-angle X-ray diffraction (XRD), BET and pore structure analysis, it was found that more uniformly structured mesopores could be formed by the method of removing the double templates simultaneously through a solvent extraction process, as compared to the separate removal of the double templates by calcinating and then etching in an acidic solution, and the amount of C₁₆TMABr affected the mesoporous structures of MHSNTs greatly. The formation processes of MHSNTs were also studied with XRD and FTIR.     

Homogeneous liquid-liquid extraction method for the selective separation and preconcentration of ultra trace molybdenum

A new simple and efficient homogeneous liquid-liquid extraction method for the selective separation and preconcentration of molybdenyl ions was developed. α-Benzoin oxime (ABO) was investigated as a complexing ligand, and perfluorooctanoate ion (PFOA⁻) was applied as a phase-separator agent under strongly acidic conditions. Under the optimal conditions ([ABO] = 2.1 × 10⁻³ M, [PFOA⁻] = 1.8 × 10⁻² M, [HNO₃] = 1.7 M, [acetone] = 11.8% (v/v)), 10 μg of molybdenum in 5 ml aqueous phase could be extracted quantitatively into 40 μl of the sedimented phase. The maximum concentration factor was 125-fold. Thiocyanate was applied as a chromogenic reagent for the direct spectrophotometric determination of molybdenum in the sedimented phase. The reproducibility of the proposed method is at the most 2.4%.The influence of the type and concentration of acid solution, the concentration of ABO, the type and volume of the water-miscible organic solvent, the concentration of PFOA⁻, and the effect of different diverse ions on the extraction and determination of molybdenum(VI) were investigated. The proposed method was applied to the extraction and determination of molybdenum(VI) in natural water, Spinach, and Lucerne samples. A satisfactory agreement exists between the results obtained by the proposed method and those reported by GF-AAS.     

Fast Multi‐residue Screening for 84 Pesticides in Tea by Gas Chromatography with Dual‐tower Auto‐sampler,Dual‐column and Dual Detectors

A fast multi‐residue screening method for determining pesticides in tea is described. Pesticides are extracted from tea with acetone and methylene chloride, then enriched and cleaned up with solid phase extraction (SPE) prior to gas chromatographic determination. The fast screening is achieved by a gas chromatograph system equipped with dual‐column, dual‐tower auto‐sampler and both electron capture detector (ECD) and flame photometric detector (FPD). Optimal conditions are investigated for the prospective pesticides including column selection, detection mode, the retention behaviors, quantitative calibration, as well as the recoveries and repeatability of pesticides from tea samples. Under the optimal conditions, with the FPD‐P detector accompanied CP‐SIL 13CB column, 48 pesticides can be separated well and detected within 38 min; and with a DB‐5 column, 35 ECD‐detectable pesticides can be separated and detected within 46 min. The recoveries of 84 pesticides in tea samples are 65–120% with 0.34–16% RSD for spiking 0.02–3.0 mg/kg standard species. Because of the thermal instability of most pesticides, direct cold extraction of pesticides from a tea sample is recommended. The proposed method provided a very fast and efficient procedure to screen 84 pesticides from a complicated tea sample matrix.