氯化钠在球形纳米氧化铈形成过程中的作用

以水合碳酸铈为原料, 以氯化钠作为助磨剂和阻聚剂, 采用机械活化法制备了球形纳米氧化铈, 用XRD法研究了水合碳酸铈与氯化钠质量比、球磨时间、煅烧温度对CeO2粉体晶粒度的影响, 用TEM对最终产物粒子进行形貌观察. 结果表明: 在碳酸铈的球磨过程及其随后的煅烧过程中, 氯化钠的存在起到了很好的助磨和阻聚作用, 所得CeO2为类球形粒子, 分散性较好, 晶粒度约为30～50 nm.     

微合金钢中稀土对沉淀相和性能的影响

在Nb(Ti,V）微合金钢中，主要沉淀相分别为Nb(C,N),(Nb,Ti)(C,N)和V（C，N）。稀土降低沉淀相完全溶解的温度，增大奥氏体中沉淀相析出的孕育期，降低析出速率，抑制奥氏体中沉淀相的析出，在铁素体相区，稀土提高沉淀相的析出速率和数量，促进沉淀相的析出，其中稀土对铌沉淀相析出的作用影响最强。锻态钢中，稀土有促进细化球化析出相的作用，随稀土含量增加，沉淀相析出数量增加，但过量稀土，促进作用又减弱，稀土在保持微合金钢强度的情况下，显著改善其冲击韧性，尤其是低温韧性，微合金钢中添加适量稀土可获得更佳的综合性能。     

Tetra- and hexaatomic cyclic clusters of main-group elements (XY)2 and (XY)3: an ab initio and density functional study

The electronic and molecular structure of planar (cyclic and linear) tetra- and hexaatomic clusters (XY) _n (XY = CC, BN, BeO, LiF; n = 2, 3) was studied using the ab initio CCD(full)/6-311+G** method and density functional approach (B3LYP/6-311+G**). The stability of cyclic clusters C₆, B₃N₃, and Be₃O₃ with D_3h symmetry is mainly determined by the aromaticity of their -electron systems.     

掺杂稀土元素对细晶BaTiO_3系统耐压及介电性能的影响

研究了稀土元素Ho2O3和Er2O3掺杂BaTiO3基瓷料,其在BaTiO3系晶粒中可抑制晶粒生长,使晶粒尺寸变小,体密度增高,呈现细晶效应,ε峰在整个温区范围内弥散,提高室温下介电常数,减小容量变化率。本系统中三价稀土氧化物Ho2O3和Er2O3等物质同时加入到BaTiO3陶瓷中后,稀土氧化物没有全部进入晶格内部发生取代,其中的一部分与其他添加剂形成一些非铁电相,提高耐压;另一部分留在晶界处,成为晶粒抑制剂,使得晶粒细小,瓷体致密,提高陶瓷的耐压。     

铈杂多配离子-水滑石超分子层柱材料ZnAl-Ce(PMoV)2的插层组装、表征及催化性能

以十四酸根阴离子柱撑Zn-Al水滑石Zn0.77Al0.22(OH)2.0.22C13H27COO.0.81 H2O(记为ZnAl-14A)为预撑前体,在水溶液中用离子交换法将以2∶17缺位杂多酸根离子(P2Mo16VO61)11-记为(P Mo V)为配体的稀土杂多配阴离子Ce(P2Mo16VO61)219-(记为Ce(PMoV)2)插层组装到水滑石层板间,合成了一种具有大的层间距(3.37 nm)的超分子插层材料Zn0.77Al0.23(OH)2.0.0105[Ce(P1.9Mo15.7V1.1O61)2].0.011C13H27COO.0.83H2O(记为ZnAl-Ce(PMoV)2)。用ICP,IR,XRD和DTA对产物的组成和结构进行了表征。结果表明,该产物中Ce(PMoV)2配阴离子沿其长轴垂直于层板的方向分布于水滑石层间;产物具有规整的层状结构和热稳定性;产物对乙酸与正丁醇的酯化反应,二甘醇的脱水-环化反应和H2O2氧化环己烷的反应有良好的催化性能,且易于回收重复使用。     

2，6－双（1′－苯基－3′－甲基－5′－氧代－4′－甲酰吡唑）吡啶稀土配合物的合成与表征

在乙醇－水溶液中合成了１４种２，６－双（１′－苯基－３′－甲基－５＇－氧代－４＇－甲酰吡唑）吡啶稀土配合物。元素分析确定其化学组成为ＲＥ＿２Ｌ＿３·ｎＨ＿２Ｏ，并用紫外可见光谱、红外光谱、核磁共振谱、热分析、荧光光谱、摩尔电导等进行了表征。     

Determination of impurities in highly pure platinum by inductively coupled plasma-atomic emission spectrometry

In this work, a cyclone spray chamber system is used in conjunction with an inductively coupled plasma-atomic emission spectrometer instead of the conventional Scott-type chamber system to reduce the lower limit of detection achieved by the instrument, and an internal standard element (Y) is introduced to eliminate the effects caused by the drift in the plasma background level. An ICP-AES method for the determination of 13 impurity elements in a highly pure platinum sample has been developed. In this method, it is not necessary either to add a platinum matrix to the calibration standard or to separate and concentrate the elements to be determined in the samples. The effect of the platinum matrix on the elements to be analyzed is corrected for by a background equivalent concentration subtraction method. The determination ranges of the method are as follows: 0.00010-0.0050% for Mg, Mn, Cu, Ag, Fe and Zn; 0.00030-0.015% for Au, Ir, Ni and Pb; 0.00050-0.025% for Rh and Al; and 0.00080-0.040% for Pd. The method is simple, rapid and accurate, and can be applied to the analysis of 99.9–99.995% pure platinum.     

Neue Pyridiniumchlorometallatverbindungen der Seltenerdelemente

Summary Reaction of the rare earth chlorides with pyridinium chloride in tetrahydrofuran (THF) under anhydrous conditions gave nearly insoluble precipitates of the composition (pyH)₃ RECl₆·THF (RE=La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Y, Er, Tm, Yb, and Lu). They were characterized by chemical analysis and IR spectroscopy; decompositionin vacuo was studied, yielding the hithero unknown complexes (pyH)₃ RECl₆ (RE=La, Ce, Pr, Sm, Tb, Ho, Y, Tm, and Lu).

     

Development of the FTIR properties of nano-structure silica gel doped with different rare earth elements,prepared by sol-gel route

Structural characteristics of pure silica gel (silica-xerogel, SiO₂) and silica gel doped with some rare earth elements (REEs) such as, praseodymium Pr³⁺, and Europium Eu³⁺, Erbium Er³⁺ and Holmium Ho³⁺ ions, with different concentrations ranging from 1 up to 6%, in the form of monolith materials were prepared by sol-gel technique, Using tetra-ethoxysilane as precursor materials, which are of particular interest for sol-gel integrated optics applications. Some structural features of sol-gel derived monolith are analyzed, namely the structure of nano-particle momolith samples, based on X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR). We show that the XRD spectra of α-crystobalite are obtained for the pure samples at 1100°C and even by doping with the four REEs ions.