Electrophoresis of a charge-inverted macroion complex: Molecular-dynamics study

We have performed molecular-dynamics simulations to study the effect of an external electric field on a macroion in the solution of multivalent Z : 1 salt. To obtain plausible hydrodynamics of the medium, we explicitly make the simulation of many neutral particles along with ions. In a weak electric field, the macroion drifts together with the strongly adsorbed multivalent counterions along the electric field, in the direction proving inversion of the charge sign. The reversed mobility of the macroion is insensitive to the external field, and increases with salt ionic strength. The reversed mobility takes a maximal value at intermediate counterion valence. The motion of the macroion complex does not induce any flow of the neutral solvent away from the macroion, which reveals screening of hydrodynamic interactions at short distances in electrolyte solutions. A very large electric field, comparable to the macroion unscreened field, disrupts charge inversion by stripping the adsorbed counterions off the macroion. Received 5 December 2001 and Received in final form 10 April 2002     

Influence of Ag substitution on the local structure and glass-forming ability of Al86Ni(8-x)Y6Agx (X = 0,1,2) liquids

The local structure of Al₈₆Ni_(8-x)Y₆Ag_x (X = 0,1,2) molten and glassy alloy was investigated by ab initio molecular dynamics simulation. It transpired that the Al₈₆Ni_(8-x)Y₆Ag_x alloy can be considered as a combination of Ni- and Y-centred Al clusters with Ag as ‘glue atoms’. First and second Ag–Ag coordination was scarcely found in Al₈₆Ni₇Y₆Ag₁, but a medium-range order between 7.5 and 9 Å was observed. The enhanced glass-forming ability and thermal stability of the alloy compared with Al₈₆Ni₈Y₆ can be attributed to the medium-range order of the Ag–Ag correlation. A second Ag–Ag coordination occurs in Al₈₆Ni₆Y₆Ag₂ and results in a decrease in glass-forming ability. The inter-atomic distances between all constituting elements increase during cooling. This increase is ascribed to a change in distribution of clusters around Al atoms towards clusters with higher coordination number around Al.     

Liquid–liquid phase equilibrium in ternary immiscible Al–Bi–Sn melts

In this paper, the liquid-phase separation of ternary immiscible Al–Bi–Sn melts was studied with resistivity and thermal analysis methods at different temperatures. The resistivity–temperature curves appear anomalous and abrupt change as rising temperature, corresponding to the distinctive and low peak of melting process in the differential scanning calorimetry (DSC) curves, indicative of the occurrence of the liquid-phase separation. The anomalous behaviour of the resistivity temperature dependence is attributable to concentration–concentration fluctuations. The microheterogeneity–microhomogeneity transformation causes large fluctuations in concentration, which make the randomness and chaos of the atoms larger, leading to the greater impediment to electron movement and the sharp rise of resistivity. The addition of tin to the Al–Bi immiscible alloys decreases the monotectic reaction. It is concluded that concentration–concentration fluctuations are responsible for the anomalous behaviour of resistivity and DSC methods.     

Conformation of poly(L-lysine)-graft-poly(ethylene glycol) molecular brushes in aqueous solution studied by small-angle neutron scattering

Small-angle neutron scattering (SANS) has been employed for the analysis of conformations of poly(L-lysine)-graft-poly(ethylene glycol) (PLL-g -PEG) molecular bottle brushes in aqueous solutions. The degree of polymerisation of the PEG chains was systematically varied in order to unravel dependence of the conformational properties of the bottle brushes on the molecular weight of the grafted chains. The grafting density was kept constant and high enough to ensure strong overlap of the PEG chains. The scattering spectra were fitted on the basis of the model of an effective worm-like chain with the account of average radial distribution and local fluctuations of the PEG density in the bottle brush. The results of the fits indicate that molecular brushes retain weakly bent configuration on the length scale of the order of (or larger than) the brush thickness. This finding is in agreement with earlier simulation and recent theoretical results.     

Melt fracture of entangled polymers*

We construct a model for a slippage plane in a sheared melt, based on a balance between reptation bridging and shear debonding. The resulting state could show up at rather low shear rates and be locally stable. But it is not easy to nucleate: the conventional entangled state is also locally stable. We propose that slippage occurs on solid walls: either at the container surface, or on dust particles floating in the melt. Slippage at solid/melt interfaces was studied (experimentally and theoretically) long ago. There is a critical stress for slippage: our estimate (for strong adsorption of melt chains on the solid) gives (plateau modulus) for typical cases. Thus, melt fracture is expected at moderate stresses, in agreement with observations by S.Q. Wang and coworkers.     

In situ mapping of high-pressure fluids using hydrothermal diamond anvil cells

We present new results combining high pressures and temperatures attainable in a diamond anvil cell with in situ synchrotron radiation induced micro-X-ray fluorescence measurements. Hydrothermal diamond anvil cells experiments have been performed by measuring the partitioning of Pb between aqueous fluids (pure water or NaCl-enriched water) and hydrous silicate melts of haplogranite composition using synchrotron X-ray fluorescence. The in situ measurements were performed in the range 0.3–1.2 GPa and 730–850 ^°C both in the aqueous fluid and in the silicate melts being in equilibrium. Pb is strongly partitioned into high-pressure–temperature hydrous melts when Cl is present in either the hydrous melt or the aqueous fluid. Moreover, our comparisons of in situ results with post-mortem results show that significant changes take place during rapid quenching especially when samples are small (few hundred of microns in diameter). Water exsolution is induced by the quench in the silicate melt showing the high mobility of Pb which immediately partitions into the water vapor phase during the quench. The current in situ approach offers thus a pertinent complementary method to the classical experimental petrology investigations.     

若干钠锗酸盐晶体和熔体的温致结构变化及其锗配位数的拉曼光谱研究

本文测定了Na4GeO4、Na2GeO3、Na2Ge4O9和Na4Ge9O20等晶体从273K到1413K升温及熔体的拉曼光谱,结合分析金红石型GeO2的相关结构和光谱,研究了其微结构单元在升温过程中的变化、熔体中的形态和锗的氧配位数及其温致变化。Na4GeO4和Na2GeO3晶体结构单元为GeO4四面体,在升温过程及其熔体中锗维持四配位。Na2Ge4O9和Na4Ge9O20晶体结构单元为GeO4四面体和GeO6八面体共存,升温过程中,GeO6八面体将发生结构转变,在熔融状态全部转变为GeO4四面体,并产生与钠离子等摩尔分数的非桥氧,在熔体中锗的氧配位数为4。研究还表明,桥氧的对称弯曲振动模可以反映不同微结构单元间的连接,并且随着温致结构的变化而产生特征性的变化。     

In situ Pressure Fluctuations of Polymer Melt Flow Instabilities: Experimental Evidence about their Origin and Dynamics

Despite the practical importance of polymer melt instabilities, there is still a lack of experiments able to characterize in situ the origin and behavior of these phenomena. In this context, a new set‐up consisting of high sensitive pressure transducers located inside a slit‐die and an advanced mathematical framework to process in situ measurements of polymer melt instabilities, are developed and applied. Our results show for the first time that pressure oscillations can actually be detected inside the die under sharkskin conditions. This originates from a factor of 10³ and 10² improvement in terms of time and pressure resolution. Furthermore, new evidence towards the propagation of the slip phenomena along the die in spurt instabilities are found.

     

硅酸盐熔体团粒结构类声子振动的高温拉曼光谱研究

硅酸盐熔体是典型的近程有序,远程无序的准稳定态分数维体系,文章采用X射线小角散射(SAXS)、低波数拉曼光谱(LWRS)及高温拉曼光谱(HTRS)实时、原位分析等技术,对高温熔融法和溶胶凝胶法合成的CaO-Al₂O₃-SiO₂和Na₂O-Al₂O₃-SiO₂系列低维非晶硅酸盐试样进行了团粒结构粒度及其类声子振动频率的定量测定,获得了低温硅酸盐凝胶、高温硅酸盐熔体及其淬火玻璃相均具有纳米级(几个纳米至几十纳米)自相似团粒结构和类声子振动模的重要结论,进而建立了测定高温熔体介观团粒结构粒度的HTRS测定法,结果表明硅酸盐熔体的团粒结构粒度在高温下均会比其室温玻璃相的团粒尺度小,且高温熔体的网络结构基元也向桥氧数减少之基元转变。这些结论为探索自然界岩浆的地球化学特征、岩浆的结晶和演化以及低维硅酸盐材料结构性能的改进提供重要理论依据及信息。     

Grafted polymers with annealed excluded volume: A model for surfactant association in brushes

We present an analytical self-consistent-field (SCF) theory for a neutral polymer brush (a layer of long polymer chains end-grafted to a surface) with annealed excluded volume interactions between the monomer units. This model mimics the reversible adsorption of solute molecules or aggregates, such as small globular proteins or surfactant micelles, on the grafted chains. The equilibrium structural properties of the brush (the brush thickness, the monomer density profile, the distribution of the end segments of the grafted chains) as well as the overall adsorbed amount and the adsorbate density profile are analyzed as a function of the grafting density, the excluded volume parameters and the chemical potential (the concentration) of the adsorbate in the solution. We demonstrate that, when the grafting density is varied, the overall adsorbed amount always exhibits a maximum, whereas the root-mean-square brush thickness either increases monotonically or passes through a (local) minimum. At high grafting densities the chains are loaded by adsorbed aggregates preferentially in the distal region of the brush, whereas in the region proximal to the grafting surface depletion of aggregates occurs and the polymer brush retains an unperturbed structure. Depending on the relative strength of the excluded volume interactions between unloaded and loaded monomers both the degree of loading of the chains and the polymer density profile are either continuous or they exhibit a discontinuity as a function of the distance from the grafting surface. In the latter case intrinsic phase separation occurs in the brush: the dense phase consists of unloaded and weakly extended chains and occupies the region proximal to the surface, whereas a more dilute phase consisting of highly loaded and strongly extended chains forms the periphery of the brush. Received 26 November 1998 and Received in final form 2 April 1999