Analysis of transient wave scattering from an inclusion with an unilateral smoothly contact interface by BEM

Summary A 2D time-domain Boundary Element Method (BEM) is applied to solve the problem of transient scattering of plane waves by an inclusion with a unilateral smooth contact interface. The incident wave is assumed strong enough so that localized separations take place along the interface. The present problem is indeed a nonlinear boundary value problem since the mixed boundary conditions involve unknown intervals (separation and contact regions). In order to determine the unknown intervals, an iterative technique is developed. As an example, we consider the scattering of plane waves by the cross section of a circular cylinder embedded in an infinite solid. Numerical results for the near field solutions are presented. The distortion of the response waves and the variation of the interface states are discussed. The financial support by the China National Natural Science Foundation under Grant No. 19872001 and No. 59878004 is gratefully acknowledged. The second author is also grateful to the support of the National Science Fund for Distinguished Young Scholars under Grant No. 10025211.     

因特网防御DoS攻击技术评述Ⅰ--攻击分类与特征·包过滤·攻击检测与防御

概述了因特网上DoS攻击的相应分类及基本特征，评述了包过滤、攻击检测及防御技术的最新成果．前一部分介绍了入口过滤、基于路由的过滤网和有效源地址强制协议．后一方面主要讨论了适合于检测攻击包的技术，介绍了新近提出的频谱分析方法和泛滥检测系统．简要评述了已有的防御SYN泛滥攻击的技术措施，介绍了Cisco的TCP拦截技术，提出了改进策略．     

Correlation between Al2O3 particles and interface of Al-Al2O3 coatings by cold spray

Al-Al₂O₃ composite coatings with different Al₂O₃ particle shapes were prepared on Si and Al substrate by cold spray. The powder compositions of metal (Al) and ceramic (Al₂O₃) having different sizes and agglomerations were varied into ratios of 10:1 wt% and 1:1 wt%. Al₂O₃ particles were successfully incorporated into the soft metal matrix of Al. It was found that crater formation between the coatings and substrate, which is typical characteristic signature of cold spray could be affected by initial starting Al₂O₃ particles. In addition, when the large hard particles of fused Al₂O₃ were employed, the deep and big craters were generated at the interface between coatings and hard substrates. In the case of pure soft metal coating such as Al on hard substrate, it is very hard to get proper adhesion due to lack of crater formation. Therefore, the composite coating would have certain advantages.     

无电极电光电场传感器灵敏度提高的研究

从提高灵敏度角度出发,理论上分析了无电极电光电场传感器电极长度与灵敏度和带宽的关系.通过比较不同结构的传输函数,验证平衡检测方式的可行性,最后选取使用平衡检测的三端口结构作为实验器件结构,从而为器件制作的可行性方案从理论上作了验证.     

基于分层光学扫描的三维数字化测量技术

采用切削分层光扫描测量与计算机数据信息合成相结合的方法，有效地解决了具有复杂内外腔结构零件的三维数字化测量。该方法比传统三维测量速度快、自动化程度高，能同时准确测量零件内外腔表面，零件边缘测量误差可控制在CCD两个像素内。利用获取的铝合金精密小箱体三维数据，在计算机上重构了零件的三维模型，并用RP技术制造出了零件物理原形。     

激光水下偏振特性用于目标图像探测

利用激光水下偏振特性获得偏振差分图像(PDI),并运用PDI技术,从理论和实验上对水下目标探测进行了研究.介绍了PDI基本概念和实验系统原理,然后比较分析了不同条件下普通图像与PDI在辨别目标距离及其纹理上的差别和PDI中背景偏振光的影响,得出利用目标和背景偏振光的差异区分二者,从而提高探测距离的结论,并取得了较好的效果.在此基础上提出了通过处理有关PDI偏振参量来进一步辨别目标与背景的设想.     

On the Solution of Discontinuous IVPs by Adaptive Runge–Kutta Codes

In this paper an automatic technique for handling discontinuous IVPs when they are solved by means of adaptive Runge–Kutta codes is proposed. This technique detects, accurately locates and passes the discontinuities in the solution of IVPs by using the information generated by the code along the numerical integration together with a continuous interpolant of the discrete solution. A remarkable feature is that it does not require additional information on the location of the discontinuities. Some numerical experiments are presented to illustrate the reliability and efficiency of the proposed algorithms.     

淋洗液发生器离子色谱抑制电导法测定甜味剂

采用淋洗液发生器阴离子交换-抑制电导检测法,同时分离和检测阿思巴甜、甜蜜素、安赛蜜和糖精4种常见的甜味剂.由于采用了淋洗液发生器,使背景电导大大降低,可以实现甜味剂的高灵敏度检测和分离.该方法具有良好的重现性、线性关系和较低的检测限.阿思巴甜、甜蜜素、安赛蜜和糖精的检测限分别是:1.27、0.045、0.033、0.063 mg/L;样品测定的回收率分别为99.7%、102.8%、98.6%、103.5%.     

A Pseudo-Random Frequency Modulation Continuous Wave Coherent Lidar Using an Optical Field Correlation Detection Method

We propose a new detection method for a pseudo-random frequency modulation continuous wave (RM-CW) coherent lidar. The feature of this method is modulation of local beam with a time delayed pseudo-random sequence. Heterodyne detection and correlation detection between the received beam and the local beam are simultaneously carried out in an optical field. In the RM-CW coherent lidar using the optical field correlation detection method, the received equipment is greatly simplified. We carried out preliminary experiments and demonstrated that the new method is effective for detection of a CW coherent lidar.     

早期火灾图像监测技术的应用与比较

本文对可提供图像信息的火灾物理现象进行了具体分析，讨论了利用摄像技术进行早期火灾探测的可能性、使用条件以及图像监测技术在火灾探测中的地位和作用，进行了若干种图像监测技术的对比实验，得出了相应的结论。