红外光谱法测定高碱性磺酸盐的碱值

采用简单、快速且有选择性的红外光谱法测定高碱性磺酸盐添加剂的碱值。在高碱性磺酸盐同一张谱图上,可以测定到在865厘米～(-1),1180厘米～(-1)分别属于δco_3～(2-),v_(asso)振动的吸收强度,由于样品厚度未知,而采用了吸收比的方法。     

Spectroscopic Studies of 1-Aryl-2,2-Dichlorocyclopropanes

Seventeen 1-aryl-2,2-dichlorocyclopropanes were examined by using IR, ¹³C NMR, and mass spectrometry. The data obtained from IR and ¹³C NMR spectra indicate that the bond strength of carbon-chlorine on the cyclopropane ring and the electron density of that carbon depend on the substituent. The mass fragmentation patterns of compounds in this series resemble those of the dibromo analogues. The fragmentation mechanism is proposed to involve the formation of indenium ion through an electrocyclization.     

Far IR harmonic oscillators in triglycine sulphate at 7 K

Transmission spectra of very thick TGS single crystals (e.g. thickness 8 mm) observed in the Far IR at 7 K do not need a high spectral resolution and nevertheless give evidence of Lorentz oscillators with damping coefficients as small as those considered for water vapour at a pressure of 0.2 atmospheres.     

Mechanism of the thermal decomposition of nitrates from graphite furnace mass spectrometry studies

A basically new mechanism of the thermal decomposition of solids is proposed to explain the mass spectral observations of gaseous molecules of CoO, CuO, Cu₂O, NiO, PbO and Mg(OH)₂ during the low-temperature decomposition of the anhydrous and hydrated nitrates of these metals. The mechanism consists of two stages: congruent gasification of all reaction products irrespective of their saturated vapor pressure and subsequent condensation of the low-volatility species (oxides and hydroxides). The partial pressures of these species at the appearance temperatures calculated from this theory for the first stage of the process (1–50 mPa) are in agreement with the detection limits of the quadrupole mass spectrometers used in these experiments. The proposed mechanism is supported by other available data obtained by thermal analysis.     

Chemical imaging in biology and medicine using ion microscopy

The ability to quantitatively map the distribution of elements on the micrometer scale and smaller with high sensitivity and isotopic discrimination is unique to ion microscopy. The information contained in ion images can be crucial to the study of the solid state, where chemical heterogeneity is often directly related to observed behavior. The tools of digital image processing allow the extraction of quantitative information from the image data. These techniques coupled with improved instrumentation for the detection of ion images drastically increase the problem solving capabilities of the ion microscope. The use of such methods and instrumentation in the ion microscopic analyses of cell cultures and tissues of biological and biomedical relevance will be discussed.     

沉积物中壬基苯酚类雌性激素化合物的加速溶剂提取方法研究

为了同时提取和检测沉积物中的雌性激素化合物对壬基苯酚(NP)、对壬基苯酚一乙氧醚(NP1EO)和对壬基苯酚二乙氧醚(NP2EO),对加速溶剂提取体系的各种条件和对壬基苯酚类化合物的硅烷基化反应条件等进行了优化。在丙酮和丙酮-二氯甲烷混合液(丙酮含量≥60%)介质中,这些化合物的硅烷基化反应很快达到反应终点。加速溶剂提取体系的最佳提取条件是120℃、8.4MPa、两次循环提取;最佳提取溶剂是二氯甲烷。与索氏提取和酸化悬浮液液提取比较,明显提高了提取率、重现性和准确性。平均添标回收率在89.3%~95.7%之间,相对标准偏差为2.3%~13.4%。本方法对壬基苯酚、对壬基苯酚一乙氧醚和对壬基苯酚二乙氧醚化合物的检出限分别为10、30、35ng/gdw(干重)。     

Radio-Frequency Hexamethyldisiloxane Plasma Deposition: A Comparison of Plasma- and Deposit-Chemistry

This study reports on the effect of input power to hexamethyldisiloxane (HMDSO) plasmas. The power dependence of the plasma-phase species and of the surface chemistry (of the deposits) has been investigated. Neutral and positive molecular species were detected within the plasma using mass spectrometry (MS). Secondary ion mass spectrometry (SIMS) was used to probe the molecular structure of the deposits. The elemental composition of the surface was determined by XPS and the deposition rate was monitored using a vibrating quartz crystal microbalance. Neutral and cationic molecules of mass greater than HMDSO were detected in the plasma. Their formation through ion-molecule reactions is proposed. Changes in the relative concentration of plasma-phase species follow those seen in molecular species detected at the deposit surface. Thus, we believe that the molecular structure of the deposits can be related to the species present in the plasma. While traditionally the dominant mechanism in deposit formation is assumed to be free radical combinations, we propose other possibilities involving cations with the aim of putting forward a new perspective on plasma polymerization mechanisms and thereby stimulating discussion.     

Sample preparation procedure for the determination of sulphur and trace metals in oil products by the ICP with a minitorch using emulsions

A quick sample preparation method was used for the determination of sulphur and trace metals in oil and oily products by the ICP with a minitorch. Stable aqueous emulsions of oils and oil products were made by using two kinds of emulsifiers (one with low sulphur content, the other sulfonated). Aqueous standard solutions can be used for the preparation of calibration solutions. The contents of S, Al, Cr, Cu, Fe, Mg, Ni and Pb in aqueous emulsions were determined and the results were in good agreement with the composition of oil standard solutions used for control analysis procedure.     

Pyrolysis chemical ionization mass spectrometry of cellulose ethers

Pyrolysis ammonia chemical ionization (PyCI) mass spectrometry was performed on hy-droxyethyl-, hydroxypropyl-,methyl-, hydroxypropylmethyl-, and ethylhydroxyethyl cel-luloses. The mass peaks in the PyCI mass spectra of these cellulose ethers could be assigned to the ions of pyrolytic dissociation products which form via the [2 + 2 + 2] cycloreversion and the E_i elimination pyrolysis pathway. Structural information about the residual amount of nonderivatized cellulose, the relative chain length distributions of the substituents in hydroxyalkyl celluloses, and the end-capping of hydroxyalkyl substituents by alkyl groups in the mixed cellulose ethers is obtained. Interference of secondary pyrolysis products in the PyCI mass spectra is found to be of minor importance, especially in the lower mass regions. © 1995 John Wiley & Sons, Inc.     

Integration of microbolometers with infrared microstrip antennas

We report on various integration schemes of infrared microbolometers with microstrip antennas. The first integration design consists of two gold (Au) rectangular microstrip patches coupled along the radiating edges by a narrow niobium (Nb) strip. Devices using silicon oxide are compared to devices using amorphous silicon as antenna substrate. An extension of the twin-patch detector design is the microstrip dipole antenna-coupled microbolometer. Two ways of connecting the device to the contact pads via narrow dc leads are presented and compared. The contribution of the dc leads to the detector response is eliminated by directly connecting the dipole to the contact pads. The thermal isolation of the microbolometer from the silicon wafer is improved by incorporating air into the antenna dielectric substrate. This leads to higher detector responsivity and shifts the resonance towards longer antennas. The implementation of a bridge microstrip dipole antenna structure is also discussed.