铟镓锌氧薄膜晶体管的悬浮栅效应研究

为了避免光照对铟镓锌氧薄膜晶体管(InGaZnO thin film transistors,IGZO TFTs)电学特性的影响,IGZO TFT要增加遮光金属层.本文研究了遮光金属栅极悬浮时,IGZO TFT的输出特性.采用器件数值计算工具TCAD(technology computer-aided design)分析了IGZO层与栅介质层界面处电势分布,证实了悬浮栅(floating gate,FG)IGZO TFT输出曲线的不饱和现象是由悬浮栅与TFT漏端的电容耦合造成.基于等效电容的电压分配方法,提出了悬浮栅IGZO TFT电流的一阶模型.TCAD数值分析及一阶物理模型结果与测试具有较高程度的符合,较完整地解释了悬浮栅IGZO TFT的电学特性.     

天文观测相机低噪声CCD视频处理电路的分析与设计

在讨论天文观测相机低噪声视频处理电路的基础上,对前置放大、差分放大、可编程增益放大、相关双采样及16bit模数转换等关键组成部分进行了分析,给出各组成部分的设计方法。对所设计的低噪声视频处理电路进行了PSPICE仿真和实验测试,仿真和实验结果表明,该视频处理电路在本身引入噪声较小的同时,有效地抑制了CCD的复位噪声和1/f等低频噪声,使天文观测相机的整机噪声<15e-,达到了指标要求。     

Simulation design of P–I–N-type all-perovskite solar cells with high efficiency

According to the good charge transporting property of perovskite, we design and simulate a p–i–n-type all-perovskite solar cell by using one-dimensional device simulator. The perovskite charge transporting layers and the perovskite absorber constitute the all-perovskite cell. By modulating the cell parameters, such as layer thickness values, doping concentrations and energy bands of n-, i-, and p-type perovskite layers, the all-perovskite solar cell obtains a high power conversion efficiency of 25.84%. The band matched cell shows appreciably improved performance with widen absorption spectrum and lowered recombination rate, so weobtain a high J_(sc) of 32.47 m A/cm~2. The small series resistance of the all-perovskite solar cell also benefits the high J_(sc). The simulation provides a novel thought of designing perovskite solar cells with simple producing process, low production cost and high efficient structure to solve the energy problem.     

What can statistical process control show us about ionization chamber stability?

PurposeStatistical process control (SPC) has been shown to be a suitable tool for medical physicists to monitor quality and keep variability low and within specifications. We report our findings regarding ionisation chamber stability in our department when using a radioactive stability check device (RSCD) and we compare them with similar previously published records, including calibration results.MethodsWe retrospectively studied the stability of a PPC 40 parallel-plate chamber, and two Farmer chambers (FC65-G and FC65-P) by checking them with dedicated RSCDs. We analysed the data following SPC methodology which includes plotting I-MR control charts, monitoring out-of-control observations, calculating process capability ratios (C_p), and estimating conformance to specifications. We also estimated the C_p and adherence to specifications of previously published data.ResultsThe PPC40 chamber hardly went out of the control limits over the whole six-year period assessed. However, Farmer chamber verifications drifted in opposite directions in phase II, and the deviations observed did not agree with their calibration records, which only increased by a maximum of 0.5%. In phase I the most unstable chamber was the FC65-P with a C_p equal to 0.9 at a specification level of ±1%. The PPC40 chamber was stable to within a maximum C_p of 1.3. Several sets of analysed data, including ours and those from other authors, fitted well within these limits: within ±1.9% and ±1.5% for a C_p of 1.5 and 1.33 respectively.ConclusionsSPC with constant long-term RSCD checking gave us a meaningful plot of the instability of our ionisation chambers. Although a period of two years between calibrations should not be surpassed, in the interim this check can conform to specifications of ±1.5%.     

High precision Zernike modal gray map reconstruction for liquid crystal corrector

This paper proposes a new Zernike modal gray map reconstruction algorithm used in the nematic liquid crystal adaptive optics system. Firstly, the new modal algorithm is described. Secondly, a single loop correction experiment was conducted, and it showed that the modal method has a higher precision in gray map reconstruction than the widely used slope method. Finally, the contrast close-loop correction experiment was conducted to correct static aberration in the laboratory. The experimental results showed that the average peak to valley (PV) and root mean square (RMS) of the wavefront corrected by mode method were reduced from 2.501\lambda (\lambda =633~nm) and 0.610\lambda to 0.0334\lambda and 0.00845\lambda , respectively. The corrected PV and RMS were much smaller than those of 0.173\lambda and 0.048\lambda by slope method. The Strehl ratio and modulation transfer function of the system corrected by mode method were much closer to diffraction limit than with slope method. These results indicate that the mode method can take good advantage of the large number of pixels of the liquid crystal corrector to realize high correction precision.     

金纳米四面体增强有机太阳电池光吸收及光伏性能研究

为增强有机太阳能电池的光利用率,提高能量转换效率,本文合成了金四面体形状的纳米粒子,并用聚苯乙烯磺酸钠(PSS)包裹形成了核壳结构的金纳米四面体(Au@PSS tetrahedra NPs).将其掺杂到有机太阳能电池空穴提取层与活性层的界面处,利用表面等离子体共振效应来增强活性层对光的吸收,从而提高有机太阳能电池的能量转换效率.研究了掺杂浓度和PSS包裹厚度对电池性能的影响.结果表明:掺杂浓度为6%时,器件性能最佳,能量转换效率达到3.08%; PSS壳层厚度优化为2.5 nm时,转换效率达到3.65%,较标准电池提升了22.9%.电池性能的改善主要源于金四面体纳米粒子的共振吸收峰位于给体材料吸收谱范围内,纳米粒子的共振促进了给体的吸收,同时PSS壳层的引入促进了激子的解离和电荷的转移,上述因素的改善提升了电池的短路电流、填充因子和转换效率.     

稳态平板法在热电器件热电转换效率测试中的应用

将稳态平板法测导热系数的实验应用于热电器件热电转换效率的测试,通过测量输入器件的传热速率和负载的输出电功获得热电器件的热电转换效率。研究发现,稳态平板法可以测量工作温度在室温到100℃范围内热电器件的热电转换效率。     

电荷耦合器件的γ辐照剂量率效应研究

对电荷耦合器件进行了不同剂量率的γ辐照实验,通过多种参数的测试探讨了剂量率与电荷耦合器件性能退化的关系,并对损伤的物理机理进行分析。辐照和退火结果表明:暗信号和暗信号非均匀性是γ辐照的敏感参数,电荷转移效率和饱和输出电压随剂量累积有缓慢下降的趋势;暗场像素灰度值整体抬升,像元之间的差异显著增加;电荷耦合器件的暗信号增量与剂量率呈负相关性,器件存在潜在的低剂量率损伤增强效应。分析认为,剂量率效应是由界面态和氧化物陷阱电荷竞争导致的。通过电子-空穴对复合模型、质子输运模型和界面态形成对机理进行了解释。     

超分子有机薄膜

利用超分子有机薄膜技术能制成新的传感分子电子器件、光学器件和生物分子器件等，受到跨学科高技术研究领域的重视。本文描述了超分子有机薄膜的制备方法以及在各应用领域的研究状况。重点介绍了我们研究组在近20年工作中，利用LB膜技术，在光电器件、气体传感技术和光学非线性，特别是在生物传感技术方面的研究成果。按照生物体系提供的信息，模拟合成功能分子，建造有组织的分子组装体，以便用来研究依赖于分子排列的生物物理化学效应。     

一种白光有机电致发光器件的制备

通过对器件结构的优化设计，提高了白光电致发光器件中蓝光成分的发光效率，从而得到了一种较为理想的有机白光电致发光器件。驱动电压为5V时，电流密度J=0．5mA／cm^2，器件的效率达到最大，流明效率为1．92 lm／W，此时器件的发光亮度接近20cd／m^2。色坐标为(x=O．317，y=0．328)。非常接近白光等能点．是色度很好的白光。并且在很大范围内，色度随器件的驱动电压或电流变化不大，当驱动电压变化至15V时。f=232mA／cm^2，色坐标变化至(x=0．338，y=O．353)。在电压为22V时，器件的亮度达到最大，为17 000cd／m^2。此外器件结构相对简单。器件制备的可重复性得到很大程度的改善。