Electrochemical properties and state of paramagnetic centers in copper-modified complex vanadium and titanium oxides

Complex vanadium and titanium oxides modified by copper ions are studied by the electrochemical and ESR methods. Oxides Cu _x V_2?y Ti _y O_5?δ·nH₂O (0<y<1.33) have a layered structure and oxides Cu _x Ti_1?y V _y O_5+δ·nH₂O (0<y<0.25), an anatase structure. The intercalation of cations Cu²⁺ into the hydrates leads to oxidation of V⁴⁺. According to ESR data, V⁴⁺ exists in the oxides in the form of VO²⁺ and an octahedral surround of oxygen (V⁴⁺?O₆), respectively. The electroreduction of ions of d-elements and chemisorbed oxygen in the oxides is analyzed. The intercalation of cations Cu²⁺ alters the content of V⁴⁺ and the chemisorption ability of the oxides. Possible reasons for this phenomenon are discussed.     

An FT-IR study of adsorption of sulfur dioxide on alpha- and gamma-alumina

In the Claus process hydrogen sulfide reacts to elemental sulfur. Because the Claus reaction is thermodynamically limited, sulfur compounds are still present in Claus tailgas. To avoid air pollution, the tailgas has to be treated.Alfa- and gamma-alumina are being used either as a catalyst or as a support for an active component in the Claus process and some tailgas treatment processes. In order to elucidate the mechanism of the Claus reaction, the adsorption of sulfur dioxide on both of the above aluminas was investigated using Fourier transform infrared spectroscopy.Different adsorbed species displaying a different heat of adsorption were detected. A broad band near 3500 cm^–1 is associated with the basic hydroxyl groups. This band is assigned to a hydrogen bond between the surface of alumina and a bisulfite species. As bisulfite species are reactive towards hydrogen sulfide, we assume that bisulfite species are active intermediates on alumina in the Claus reaction.     

锂离子电池锡氧化物基负极材料的湿化学合成与电化学性质

采用新兴的湿化学方法合成了锡氧化物基粉末材料。用X-射线衍射、扫描电镜和电化学方法对材料的微观结构、形貌和电化学性能进行了详细的研究。结果表明，经400 ℃热处理4 h的锡氧化物基材料的颗粒大小均匀，平均粒径约为200 nm。这种材料的可逆充电容量超过570 mAh·g^-1，30次循环后平均每次循环的容量衰减只有0.15%。良好的电化学性能表明锡氧化物基材料有望作为新一代锂离子电池的负极材料。     

Solidification of metallic tin in dispersed phase

Differential scanning calorimetry (DSC) and particle size measurements were carried out on disproportionation products of pure SnO to investigate the fusion and solidification behaviour of Sn droplets and their catalytic nucleation on Sn oxides. If disproportionation reaction takes place at T ≥ 798 K, the products are metallic Sn and SnO₂; but for 523 < T < 798 K, SnO₂ is replaced by an intermediate oxide (IO) Sn_xO_(1+x). On melting, samples with IO show a drop of melting point of metallic tin due to Gibbs–Thomson effect; no lowering of melting point was observed in samples with SnO₂. On the other hand, if solidification occurs in the presence of IO, Tin droplets always displayed three distinct exothermic solidification peaks, but if it takes place in the presence of SnO₂, only one exothermic peak is observed. Undercooling values and contact angles were determined for each of the heterogeneous nucleation processes. The different behaviour of metallic Tin droplets was related to the different lattice symmetry of SnO₂ and IO, which act as nucleation catalysts.     

Ln2O3/Al2O3催化酯化合成邻苯二甲酸二辛酯

Ｌｎ_２Ｏ_３／Ａｌ_２Ｏ_３催化酯化合成邻苯二甲酸二辛酯陈其瑞，张凤美，罗明润，焦肇林（安徽师范大学化学系，芜湖２４１０００）关键词稀土氧化物，担载催化剂，催化酯化，邻苯二甲酸二辛酯邻苯二甲酸二（２－乙基己醇用酯（Ｄｉｏｃｔｙｌｐｈｔｈａｌａｔｅ）是一...     

Thermolysis of furoxans annulated with five-membered carbocycles in the presence of dipolarophiles

The conditions for the thermolysis of furoxans annulated with differently strained five-membered carbocycles (cyclopentafuroxan 1, norbornenofuroxan 2, and acenaphthofuroxan 3) to bis(nitrile oxides) in the presence of various dipolarophiles (diethyl acetylenedicarboxylate, benzoylformonitrile, and ethoxycarbonylformonitrile) were optimized. It was found that the reactivities of the above furoxans as sources of bis(nitrile oxides) decrease in the order 2 > 1 > 3. Among the furoxans studied, only norbornenofuroxan 2 can be recommended as a possible cross-linking reagent for polymers. The formation of di-N-oxides of 3,4-bis(cyanopropyl)-, 3,4-bis(cyanocyclopentyl)-, and 3,4-bis(cyanonaphthyl)furoxans was detected. They resulted from intermolecular cyclodimerization of bis(nitrile oxides) initially formed in the thermolysis of furoxans 1–3. Dedicated to Academician V. A. Tartakovsky on the occasion of his 75th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1521–1528, August, 2007.     

Polymer-supported calix[4]arenes for sensing and conversion of NO2/N2O4

The use of simple calix[4]arenes 1a,b for NO₂/N₂O₄ sensing and conversion is demonstrated, both in solution and in the solid state. Upon reacting with these gases, compounds 1a,b encapsulate reactive NO⁺ cations within their cavities with the formation of deeply colored (λ_max∼570 nm) charge-transfer complexes 2a,b. Further functionalization of the calix[4]arene platform is reported for attachment to solid supports. Polymer-supported calixarene material 3 was prepared, which reversibly traps NO₂/N₂O₄ with the formation of nitrosonium storing polymer 4. Material 4 was effectively used for nitrosation of amides.     

Nanorods of Various Oxides and Hierarchically Structured Mesoporous Silica by Sol-Gel Electrophoresis

In this paper, we report the template-based growth of nanorods of oxides and hierarchically structured mesoporous silica, formed by means of a combination of sol-gel processing and electrophoretic deposition. Both single metal oxides (TiO₂) and complex oxides (Pb(Zr_0.52Ti_0.48)O₃) have been grown by this method. This method has also been applied to the growth of nanorods of mesoporous silica having an ordered pore structure, where the pores are aligned parallel to the long axis of the nanorod. Uniformly sized nanorods of about 125–200 nm in diameter and 10 m in length were grown over large areas with near unidirectional alignment. Appropriate sol preparation yielded the desired stoichiometric chemical composition and crystal structure of the oxide nanorods, with a heat treatment (500–700°C for 15–30 min) for crystallization, densification and any necessary pyrolysis.     

New hybrid chelating sorbents with grafted 3-aminopropionate groups based on mixed silicon,aluminum, titanium,or zirconium oxides

A series of new hybrid organo-inorganic sorbents with the 3-aminopropionate chelating group was synthesized. The synthesis includes the copolycondensation (sol—gel method) of tetraethoxysilane, 3-aminopropyltriethoxysilane, and several modifiers (MeSi(OEt)₃, EtSi(OEt)₃, Ti(OEt)₄, AlONO₃, ZrOCl₂) followed by carboxyethylation with acrylic acid. The obtained chelating sorbents were characterized by elemental analysis, FT-IR and ¹H NMR spectroscopy, and thermogravimetry. The N-carboxylated sorbents have a higher sorption capacity with respect to metal ions (0.5–0.9 mmol g⁻¹, pH 6.3, NH₄OAc, 20 °C) than the starting sorbents with the primary amino group (0.05–0.2 mmol g⁻¹) and manifest high selectivity for copper(II) ion extraction. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1783–1788, August, 2005.