Fluidized-bed extraction of polycyclic aromatic hydrocarbons from contaminated soil samples

Summary Due to the carcinogenity and ubiquity of polycyclic aromatic hydrocarbons in the environment they are of ongoing interest to analytical chemistry. In this study, a comparison of the classic Soxhlet extraction and, fluidized-bed extraction, has been conducted. The extraction of polycyclic aromatic hydrocarbons by this technique has been optimized considering as experimental variables the variation of the number of extraction cycles and the holding time after reaching the heating temperature by means of a surface response design. The significance of the operational parameters of the fluidized-bed extraction on the performance characteristics has been investigated. For the determination of the analytes a selective clean-up of the extracts followed by a fast gas chromatography method with mass spectrometric detection was used, resulting in low limits of detection (0.2 pg μL⁻¹). The accuracy of the complete analytical method was established by extraction and analysis of reference materials.     

尿中3种苯氧羧酸类除草剂的气相色谱分析法

本文研究了2,4-滴、2,4-滴丙酸和2甲4氯3种苯氧羧酸类除草剂用硫酸、三氯化硼、氯化氢和三氟乙酸等4种催化剂的甲醇、乙醇、丙醇、丁醇、戊醇、苯甲醇、三氟乙醇、五氟丙醇、二氯丙醇和五氟苯甲醇等10种醇的酯化衍生反应条件,在此基础上建立了尿中3种苯氧羧酸类除草剂的各种衍生化气相色谱电子俘获检测方法,其中较灵敏的方法2,4-滴和2,4-滴丙酸的检出限低于10 ng/mL,2甲4氯的检出限低于20ng/mL,适于职业接触者和中毒者的尿分析。     

On-column injection onto capillary columns. Part 2: Study of sampling conditions; practical recommendations

During one year continuous use of on-column injection, the typical advantages described in our first report have fully been confirmed. In addition the analysis of large sample volumes has proved promising. Only minor modifications have been applied to the on-column injector device. Broad evidence has been gathered showing that full separation efficiency of the capillary columns after on-column injection is attained only when cold trapping or the solvent effect, as band shortening mechanisms, are working- While, under the conditions of on-column injection, cold trapping is less efficient than with other injection techniques, the opposite holds true for the solvent effect. Compared with splitless injection, the danger of excessive solvent condensation on the column is increased. A working rule is presented for establishing the optimal chromatographic conditions for handling large sample volumes while ensuring full separation efficiency yet avoiding harm to the column.     

Analysis of carboxylic acids by gas chromatography of acetonyl esters. Application to aromatic,dicarboxylic and higher fatty acids

Summary The gas chromatographic analysis of the acetonyl esters of aromatic, dicarboxylic and higher fatty acids is reported and discussed together with their electron impact and chemical ionisation mass spectra. An improved method for the preparation of acetonyl esters is discussed.     

Der Gaskomplex MnAlF5 und sein Einfluß auf die sublimative Reinigung von AlF3

The Gas Complex MnAlF₅ and its Influence on the Purification of AlF₃ by Sublimation The gas complex MnAlF₅ has been determined mass spectroscopically by the ions MnAlF₅⁺ and MnAlF₄⁺. The gas complex MnAlF₅ is formed above 973 K by heating up mixtures of AlF₃/MnF₂ or AlF₃ · 3 H₂O endowed with Mn²⁺ or by heating up solid MnAlF₅ too. At 1 008 K the enthalpie of dissociation is 197 kJ/mole. The equilibrium structures of the high spin molecule MnAlF₅ (S = 5/2) were examined with ab initio calculations at the HF-level by comlete gradient optimizing. Two minimum structures were found on the potential energy surface. A bidentate fluorine bridged structure was found to be the most stable at the HF-level. Vibrational frequencies and thermodynamic functions of complex formation were estimated for both minimum structures. The importance of the formation of the gas complex for the separation of MnF₂ and AlF₃ by sublimation is discussed.     

Two-dimensional capillary gas chromatography without intermediate trapping. Electron capture detector quantitation of an amino alcohol (KABI 2128) in serum after trifluoroacetylation

A two- dimensional gas chromatograph based on the Deans switching principle is described. The unit comprises two separate ovens, each containing a fused silica capillary column. The columns are joined in a specially designed manifold permitting heart cuts to be performed without significant decrease in efficiency. The switching speed and the retention time stability of the system made it possible to perform heart cuts of only a few seconds' duration. The system has been used under isothermal conditions for the determination of an amino alcohol (KABI 2128) in the low ng/ml range after trifluoroacetylation and with electron capture detection. A much shorter clean-up procedure could be used in combination with the two-dimensional gas chromatograph as compared to a method using a single glass capillary column.     

Analysis of earthy and musty odors in water samples by solid-phase microextraction coupled with gas chromatography/ion trap mass spectrometry

A method for the determination of the earthy and musty odors geosmin, 2-methylisoborneol (2-MIB), 2-isobutyl-3-methoxy pyrazine (IBMP), 2-isopropyl-3-methoxy pyrazine (IPMP) and 2,4,6-trichloroanisole (2,4,6-TCA) in water by headspace solid-phase microextraction (HSSPME) combined with gas chromatography-ion trap mass spectrometry (GC-ITMS) is described. Several parameters of the extraction and desorption procedure were studied and optimized (such as types of fibers, extraction temperature, extraction time, desorption temperature, desorption time, ionic strength and elutropic strength and pH of samples). The method shows good linearity over the concentration range 1-500 ng l⁻¹ and gives detection limits of sub-part per trillion levels for all compounds. Good precision (5.9-9.8%) is obtained using IBMP as internal standard. Finally, the method was successfully applied to analyze earthy and musty odors in tap water and lake water.     

Optimization of a New Extraction Technique for Analysis of Verbenone and cis-Verbenol in Pine Seeds

Results from a systematic study of the factors affecting extraction of cis-verbenol and verbenone from pine seeds are presented. Five extraction conditions were investigated: extraction solvent, method of extraction, extraction temperature, volume of solvent, and the ratio of the mass of sample to the amount of extraction solvent. The resulting optimized method uses magnetic-stirring-assisted extraction of pine seeds (5 g) with ethyl acetate (75 mL) for 20 min, at room temperature. RSDs were less than 5% for both compounds. GC–FID was used for quantification of cis-verbenol and verbenone in the extracts.     

Preparation of a Carbon-Coated SPME Fiber and Application to the Analysis of BTEX and Halocarbons in Water

A carbon-coated fiber for solid-phase microextraction (SPME) has been prepared from powdered activated carbon (PAC) and a fused-silica fiber. Scanning electron microscopy of the coating revealed the carbon particles were uniformly distributed on the surface of the fiber substrate. Efficient extraction of BTEX (benzene, toluene, ethylbenzene, p-xylene, and o-xylene) and halocarbons (chloroform, trichloroethylene, and carbon tetrachloride), with short extraction and desorption times, was achieved by use of the coated fiber. The maximum working temperature of the coated fiber was 300 °C and the lifetime was over 140 desorption operations at 260 °C. Limits of quantification (LOQ) of the SPME method for the eight analytes ranged from 0.01 to 0.94 μg L⁻¹, and relative standard deviations (RSD) were below 7.2% (n=6). Recoveries were 87.9–113.4% when the method was applied to the analysis of BTEX and the halocarbons in real aqueous samples. An erratum to this article is available at .     

Preparative isolation and characterization of zinc dialkyldithiophosphates from commercial antiwear additives

An automated HPLC separation methodology was developed for the preparative separation of ZnDTP components from commercial lubricant antiwear additives. Using silica columns that can be reactivated by elution with appropriate solvents, gram quantities of additives can be isolated. The isolated materials are useful for carrying out further mechanistic and synthetic studies. Preliminary estimations suggest that separation repeatability and fraction recoveries have acceptable levels. Qualitative characterization of isolated ZnDTP mixtures was achieved by IR, TLC‐FID, and RP‐HPLC. IR is useful for assessing the nature of ZnDTP alcoholic moieties. TLC‐FID provides a check on the preparative HPLC separation efficiency. RP‐HPLC on octadecylsil‐silica columns provides fingerprints for isolated commercial ZnDTP active concentrates. Fingerprinting on small bore HPLC columns proved advantageous compared with conventional columns.