The Thermal Fragmentation of Some O-Arylsulfonyl Diphenylhydroxylamine Derivatives

Thermal fragmentation of O-Aryl-N,N-diphenylhydroxylamines I and II were investigated. Neat heating in an atmospheric nitrogen afforded arenes, biaryl, diaryl sulfide, diphenylamine, diaryl sulfone, phenols, arenesulfonic acid, carbazole, and thianthrene. In the presence of isoquinoline as a radical trap, I gave 1-phenylisoquinoline as well as the previous products. Analogous results were obtained on heating of I in boiling tetraline, which lead to the formation of 1-hydroxytetraline, α -tetralone, and 1,1′-bitetralyl as the major products. A free-radical mechanism has been postulated to take place through the initial homolysis of N─O and S─O bonds to account for the identified products.     

Grafting onto Wool. XXVII. Graft Copolymerization of MixeD Vinyl Monomers by Use of Ceric Ammonium Nitrate as Redox Initiator

In order to ascertain the effect of a donor monomer, vinyl acetate (VAc), on the graft copolymerization of acceptor monomers, ethyl acrylate (EA) and butyl acrylate (BA), grafting of mixed vinyl monomers (EA + VAc) and (BA + VAc) was carried out on Himachali wool in aqueous medium using ceric ammonium nitrate (CAN) as a redox initiator. Graft copolymerization was carried out at different temperatures for various reaction periods. Percent grafting and percent efficiency were determined as functions of 1) concentration of mixed vinyl monomers, 2) concentration of CAN, 3) concentration of HNO₃ 4) temperature, and 5) reaction time. VAc, the donor monomer, was found to decrease percent grafting of EA and BA onto wool.     

Characterization of the Charge Transfer Complex from Furan and Maleic Anhydride and the Alternating Copolymer

A previously unreported copolymer between furan and maleic anhydride was readily obtained by free radical initiation of benzene solutions of the comonomers. The product copolymers exhibit remarkably uniform composition regardless of monomer feed ratios. A donor-acceptor complex was suspected to account for the 1:1 alternating sequence of the monomers in the product. The complex was easily detected and partially characterized, although its exact role in the mechanism is uncertain.     

KINETICS AND MECHANISM OF PHASE TRANSFER CATALYZED FREE RADICAL POLYMERIZATION OF METHYL ACRYLATE

The kinetics of free radical polymerization of methylacrylate (MA) was investigated using benzyltributylammonium chloride (BTBAC) as phase transfer catalyst and potassium peroxydisulfate as initiator at aconstant temperature, 60°C, in an inert atmosphere under unstirred condition. The effect of concentrations of the monomer, initiator and the catalyst on polymerization was discussed and a mechanism of polymerization has been proposed. The order with respect to the monomer, initiator, and phase transfer catalyst was found to be 2, 0.5, and 0.5, respectively.     

STUDY OF THE EFFECT OF TWO BPO/AMINE INITIATION SYSTEMS ON THE FREE-RADICAL POLYMERIZATION OF MMA USED IN DENTAL RESINS AND BONE CEMENTS

ABSTRACT

The kinetics of the free radical bulk polymerization of methyl methacrylate (MMA) was studied by DSC, using the benzoyl peroxide (BPO)/amine initiation system. N,N dimethyl-4-aminophenethyl alcohol (DMPOH), which is a newly synthesized and used amine in the preparation of acrylic dental resins and bone cements was examined, and the results compared to the most commonly used in these applications amine, the N,N dimethyl-p-toluidine (DMT). For both amines, the effect of the molar ratio of BPO/amine and of the reaction temperature, on the polymerization kinetics was investigated. The prepared polymers were characterized by determination of the average molecular weights (M¯ _n and M¯ _w ) and molecular weights distribution (M¯ _w /M¯ _n ) using Gel Permeation Chromatography. DMPOH was found to lead in slightly higher polymerization rates, lower gel times and lower molecular weights than DMT. The values of these parameters for both amines were influenced by the molar ratio of BPO to amine, when the product of the concentrations of these was kept constant. The highest polymerization rate occurred in the lowest gel time, resulting in polymers with the lowest molecular weight, and was observed when a molar ratio of about 1.5 BPO/amine was used. However, the final monomer conversion was found to be independent of the molar ratio and amine used. The activation energy of polymerization was found to be 51.8 kJ/mol K for BPO/DMPOH and 47.1 kJ/mol K for BPO/DMT.     

退火温度对TiO2/CdSe纳米片异质结薄膜光电性能的影响

采用水热法在FTO上制备（001）高活性晶面主导的TiO₂纳米片薄膜,利用循环伏安法在TiO₂纳米片薄膜上沉积CdSe颗粒,制备了TiO₂/CdSe纳米片异质结薄膜。分别在150、250、350、450 ℃,氩气保护气氛中对样品进行退火。利用X射线衍射仪（XRD）、场发射扫描电镜（FESEM）、X射线光电子能谱分析仪（XPS）、紫外-可见（UV-Vis）分光光度计以及电化学工作站对不同温度退火后的TiO₂/CdSe纳米片异质结薄膜的微观形貌、晶体结构、光电化学性能进行表征和测试。结果表明：六方相CdSe纳米颗粒均匀包覆在TiO₂纳米片表面,直径30 nm左右;随着退火温度的升高CdSe纳米颗粒长大,形成光滑的CdSe薄膜,且晶化程度提高;TiO₂纳米片表面的Se元素与Cd元素发生氧化;TiO₂/CdSe纳米片异质结薄膜对可见光的吸收光谱发生红移,禁带宽度逐渐减小。光电化学性能测试表明随着退火温度的升高,TiO₂/CdSe纳米片异质结薄膜的光电流密度显著提高,开路电压减小,但由于SeO2和CdO的出现,导致填充因子减小,影响光电转换效率的提高。在本实验条件下,TiO₂/CdSe纳米片异质结薄膜的最佳退火温度为150 ℃,填充因子为0.77,光电转换效率达到3.12%。     

CoFeOx/MoO2准平行纳米阵列电极的析氢性能

利用CoFe层状双金属氢氧化物(CoFe LDH)准平行纳米片阵列作为载体前驱体,通过原位负载及煅烧方式,实现了含有氧空位的 MoO₂纳米颗粒在纳米片阵列表面的生长。电化学研究结果表明,所得 CoFeO_x/MoO₂纳米阵列电极具有高析氢反应(HER)催化活性。该电极在10和1 000 mA·cm^-2时的HER过电位分别为40和217 mV。在50 mA·cm^-2的电流密度下,该电极可以稳定运行125 h。     

骨架结构多孔TiO2薄膜增强染料敏化太阳能电池性能

以空心球状TiO₂为基体、以片状TiO₂为骨架,采用刮刀法制备了染料敏化太阳能电池的多孔TiO₂光阳极薄膜。光电转化效率测试结果表明,当作为骨架支撑材料的片状TiO₂含量为20wt%时,光阳极薄膜组装成太阳能电池的光电转化效率达到最高值4.53%,比商业P25制备的无孔无骨架TiO₂薄膜电池(4.06%)及无骨架结构的多孔TiO₂薄膜电池(4.17%)的性能均有显著提高。当片状TiO₂的最佳含量为20wt%电池薄膜厚度为33 μm时,太阳能电池光电转化效率进一步提升为7.06%。光电性能增强的原因是骨架结构有利于快速传输电子并增大染料吸附量。本研究通过设计制备具有骨架结构的多孔TiO₂薄膜为提高染料敏化太阳能电池性能提供了新的思路。     

Application of isotopic labeling,and gas chromatography mass spectrometry,to understanding degradation products and pathways in the thermal-oxidative aging of Nylon 6.6

Nylon 6.6 containing ¹³C isotopic labels at specific positions along the macromolecular backbone has been subjected to extensive thermal-oxidative aging at 138 °C for time periods up to 243 days. In complementary experiments, unlabeled Nylon 6.6 was subjected to the same aging conditions under an atmosphere of ¹⁸O₂. Volatile organic degradation products were analyzed by cryofocusing gas chromatography mass spectrometry (cryo-GC/MS) to identify the isotopic labeling. The labeling results, combined with basic considerations of free radical reaction chemistry, provided insights to the origin of degradation species, with respect to the macromolecular structure. A number of inferences on chemical mechanisms were drawn, based on 1) the presence (or absence) of the isotopic labels in the various products, 2) the location of the isotope within the product molecule, and 3) the relative abundance of products as indicated by large differences in peak intensities in the gas chromatogram. The overall degradation results can be understood in terms of free radical pathways originating from initial attacks on three different positions along the nylon chain which include hydrogen abstraction from: the (CH₂) group adjacent to the nitrogen atom, at the (CH₂) adjacent the carbonyl group, and direct radical attack on the carbonyl. Understanding the pathways which lead to Nylon 6.6 degradation ultimately provides new insight into changes that can be leveraged to detect and reduce early aging and minimize problems associated with material degradation.