高氯废水化学需氧量分析方法综述

对高氯废水化学需氧量分析方法进行归纳和综述。常用的高氯废水化学需氧量分析方法有氯气校正容量法、降氯密闭消解分光光度法以及高温氧化总有机碳系数换算法等。其中氯气校正容量法操控要求较高,分析耗时较长,不适用于大批量样品同步分析;降氯密闭消解分光光度法灵敏度高,但在降氯过程中增加了重金属盐硫酸汞的用量,分析成本较高,易产生二次污染,且对样品的均质性要求较高;高温氧化总有机碳系数换算法操作便捷、抗干扰能力强,但是换算系数易随不同来源、不同组分的样品发生波动,数据可比性需要通过实验验证。经过梳理归纳,明确各种分析方法的特点和适用范围,为研究人员选择合适的分析方法或进一步开展相关的方法研究提供参考。     

Synthesis of IONP's decorated graft copolymers and study of their magnetic force–induced wastewater treatment

Our work is focused on facile synthesis and modification of amylopectin‐grafted block copolymers by using reversible addition?fragmentation chain transfer (RAFT) polymerization technique. This technique yields polymers with controlled molecular weight and low polydispersity indexes and is feasible with a wide range of monomers. Five different grades of amylopectin‐grafted polymethacrylic acid and polyacrylamide block copolymers have been synthesized via RAFT, by varying the amount of acrylamide employing amylopectin‐based macro chain transfer agent. Graft copolymers have been upgraded as smart responsive graft copolymers, through the incorporation of iron oxide nanoparticles (IONPs) via condensation reaction. The polymeric materials have been extensively characterized by energy‐dispersive X‐ray analysis, Fourier transform infrared spectroscopy, proton magnetic resonance spectroscopy, scanning electron microscopy, ultraviolet‐visible spectroscopy, gel permeation chromatography, transmission electron microscopy, thermogravimetric analysis, and X‐ray diffraction analysis. Normal and responsive graft copolymers have been studied for removal of model contaminant (kaolin), and responsive graft copolymers have been used to remove methylene blue dye (without using any adsorbent) from water by applying external magnetic field. The upgraded block copolymers have shown best performance in wastewater treatment.     

Antibiotics Separation with MXene Membranes Based on Regularly Stacked High‐Aspect‐Ratio Nanosheets

The uncontrolled release of antibiotics and pharmaceuticals into the environment is a worldwide increasing problem. Thus, highly efficient treatment technologies for wastewater are urgently needed. In this work, seven kinds of typical antibiotics (including water and alcohol soluble ones) are successfully separated from the corresponding aqueous and ethanolic solutions using highly regular laminated membranes. Our membranes are assembled with 2–4 μm titanium carbide nanosheets. The solvent permeance through such titanium carbide membrane is one order of magnitude higher than that through most polymeric nanofiltration membranes with similar antibiotics rejection. This high flux is due to the regular two‐dimensional (2D) structure resulting from the large aspect ratio of titanium carbide nanosheets. Moreover, the electrostatic interaction between the surface terminations and the antibiotics also affects the rejection and enhances the antifouling property. Such 2D titanium carbide membranes further broaden the application scope of laminated materials for separation and purification of high value added drugs in academia and industry.     

激光冷却和捕陷中性原子③

6 激光冷却和捕陷中性原子技术的应用 前面已经提到,激光冷却和捕获中性原子技术最主要的应用是在精密计量和超冷原子物理两个方面.在精密计量方面最为典型的是可用于原子频标的"原子喷泉"(atomic fountain)技术;而在超冷原子物理方面最为典型的是玻色-爱因斯坦凝聚(Bose-Einstein condensation)和原子波激射器(atom laser)的实现.     

Speciation studies of nickel and chromium in wastewater from an electroplating plant

A speciation scheme involving the use of flame atomic absorption spectrometry (FAAS) and differential pulse adsorptive cathodic stripping voltammetry (DPAdCSV) techniques was applied to studies of nickel and chromium in wastewater from a nickel-chrome electroplating plant. Dimethylglyoxime (DMG) and diethylenetriaminepentaacetic acid (DTPA) were employed as complexing agents for adsorptive voltammetric determination of Ni and Cr, respectively. Cr(III) and Cr(VI) were determined by exploiting differences in their reactivity towards DTPA at HMDE. Total dissolved metal content was in the range 2906-3141 and 30.7-31.2 mg l⁻¹ for Ni and Cr, respectively. A higher percentage of the metal was present as labile species (mean value of 67.9% for Ni and 79.8% for Cr) suggesting that strongly binding ligands are not ubiquitous in the sample. About 77.8% of Cr was found to exist in the higher oxidization state, Cr(IV). Results on effect of dilution on lability of the metal forms in the sample using DPAdCSV showed slight peak shifts to a more negative (cathodic) value by −0.036 V for Ni and −0.180 V for Cr with a dilution factor of 100, while peak intensity (cathodic current) remained fairly constant.     

COD速测仪测定工业废水中CODCr

采用标准回流法和仪器法（用ＣＯＤ速测仪）对工业废水化学需氧量进行对照测定，结果发现，用ＣＯＤ速测仪测定工业废水，简便、快速、精密度好、准确度高。     

Long-term operation of a domestic wastewater treatment plant with membrane filtration

Possibilities of membrane technology and the use of membrane processes in wastewater treatment were investigated. The main focus was the monitoring of the starting phase of a domestic wastewater treatment plant. Experimental part of the study was realized at the municipal wastewater treatment plant (WWTP) Devínska Nová Ves — Bratislava during the period from February 2005 to September 2006. The system was stable without any external chemical treatment of the membrane modules and the permeate quality was very high. Observed decrease of COD and BOD₅ values ranged between 91 % and 98 %. The process of nitrification was very successful considering its high efficiency (> 95 %). Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

Electrodeposition of zinc oxide nanoparticles on multiwalled carbon nanotube-modified electrode for determination of caffeine in wastewater effluent

We report on the development of an electrochemical sensor based on electrodepositing zinc oxide on multiwalled carbon nanotube-modified glassy carbon electrode for the detection of caffeine in pharmaceutical wastewater effluents. The measurements were carried out using cyclic voltammetry, electrochemical impedance spectroscopy, chronoamperometry and differential pulse voltammetry (DPV). DPV measurements showed a linear relationship between oxidation peak current and concentration of caffeine in 0.1 M HClO₄ (pH 1.0) over the concentration range 0.00388–4.85 mg/L and a detection limit of 0.00194 mg/L. The diffusion coefficient and Langmuir adsorption constant for caffeine were calculated to be 3.25 × 10^?6 cm² s^?1 and 1.10 × 10³ M^?1, respectively. The sensor showed satisfactory results when applied to the detection of caffeine in wastewater effluents.     

纳米零价铁去除水中重金属离子的研究进展

重金属离子危害严重.本文综述了近几年纳米零价铁去除水中重金属离子的研究,总结了纳米零价铁去除水中重金属离子的机理,主要包括:纳米零价铁的表面吸附-配合、还原、吸附-还原,并对纳米零价铁在这一领域的应用进行了展望.     

Ultrasound‐assisted dispersive liquid–liquid microextraction coupled with capillary gas chromatography for simultaneous analysis of nine pyrethroids in domestic wastewaters

A simple and rapid ultrasound‐assisted dispersive liquid–liquid microextraction method coupled with GC‐flame ionization detection was developed for simultaneous determination of nine pyrethroids in domestic wastewater samples. An ultrasound‐assisted process was applied to accelerate the formation of the fine cloudy solution using small volume of disperser solvent, which markedly increased the extraction efficiency and reduced the equilibrium time. Various parameters affecting the extraction efficiency were investigated, including the type and volume of extraction solvent and disperser solvent, extraction and ultrasonic time. Good linearity was obtained for all analytes in the range of 0.8–100 μg/L with the correlation coefficient (r²)≥0.998. The recoveries at three spiking levels ranged from 75.3 to 101.2% with the RSD less than 8.7% (n=5). Under the optimum condition, the enrichment factors for the nine pyrethroids ranged from 728‐ to 1725‐fold. This method offered a good alternative for routine analysis due to its simplicity and reliability.