Protein C recognition by ion‐coordinated imprinted monolithic cryogels

The protein C imprinted monolithic cryogel was synthesized using 2‐hydroxyethyl methacrylate by redox cryo‐polymerization method. The prepared monolithic cryogel was characterized by Fourier transform infrared spectroscopy, swelling test, surface area measurements, and scanning electron microscopy. The nonimprinted cryogel was prepared as well for control. Adsorption of protein C from aqueous solutions was investigated in a continuous mode and several parameters affecting adsorption performance were optimized. The maximum protein C adsorption amount was 30.4 mg/g. The selectivity studies were performed by monolithic column studies and fast protein liquid chromatography, using hemoglobin and human serum albumin as competing proteins. The relative selectivity coefficients were 2.37 and 8.89 for hemoglobin and human serum albumin, respectively. Reusability was tested for ten consecutive adsorption–desorption cycles, and no significant change in adsorption capacity was recorded. A pseudo‐second‐order model was suitable to interpret kinetic data, and the Langmuir model suited the adsorption isotherms well.     

Tris(hydroxymethyl)aminomethane-modified magnetic microspheres for rapid affinity purification of lysozyme

A novel affinity purification method for lysozyme (LZM) based on functionalized magnetic microspheres was developed. Tris(hydroxymethyl)aminomethane (Tris)-modified magnetic microspheres with specific affinity toward LZM were prepared using Tris as ligand and silica-coated magnetic microshperes as support. Transmission electron microscopy and magnetic property measurement results showed that the Tris-modified magnetic microspheres have a very good core-shell structure and high magnetization.The maximum binding capacity of LZM was about 108.6 mg/g magnetic microspheres. LZM purified from chicken egg white had high purity and well-maintained activity of 8140 U/mg. This magnetic-mediated LZM purification strategy has advantages of high efficiency, low cost and easy operation.     

Automated flow-based anion-exchange method for high-throughput isolation and real-time monitoring of RuBisCO in plant extracts

In this work, a miniaturized, completely enclosed multisyringe-flow system is proposed for high-throughput purification of RuBisCO from Triticum aestivum extracts. The automated method capitalizes on the uptake of the target protein at 4 °C onto Q-Sepharose Fast Flow strong anion-exchanger packed in a cylindrical microcolumn (105 × 4 mm) followed by a stepwise ionic-strength gradient elution (0-0.8 mol/L NaCl) to eliminate concomitant extract components and retrieve highly purified RuBisCO. The manifold is furnished downstream with a flow-through diode-array UV/vis spectrophotometer for real-time monitoring of the column effluent at the protein-specific wavelength of 280 nm to detect the elution of RuBisCO. Quantitation of RuBisCO and total soluble proteins in the eluate fractions were undertaken using polyacrylamide gel electrophoresis (PAGE) and the spectrophotometric Bradford assay, respectively. A comprehensive investigation of the effect of distinct concentration gradients on the isolation of RuBisCO and experimental conditions (namely, type of resin, column dimensions and mobile-phase flow rate) upon column capacity and analyte breakthrough was effected. The assembled set-up was aimed to critically ascertain the efficiency of preliminary batchwise pre-treatments of crude plant extracts (viz., polyethylenglycol (PEG) precipitation, ammonium sulphate precipitation and sucrose gradient centrifugation) in terms of RuBisCO purification and absolute recovery prior to automated anion-exchange column separation. Under the optimum physical and chemical conditions, the flow-through column system is able to admit crude plant extracts and gives rise to RuBisCO purification yields better than 75%, which might be increased up to 96 ± 9% with a prior PEG fractionation followed by sucrose gradient step.     

用于NH3选择性催化还原NO的非钒基催化剂研究进展

NH3选择性催化还原NO (NH3-SCR)技术在燃煤电厂烟气脱硝过程中有着多年的工业应用经验,也是最有望实际应用于柴油车尾气NOx催化去除的技术之一.鉴于目前工业化应用的V2O5-WO3 (MoO3)/TiO2催化剂体系应用于柴油车尾气净化仍存在着诸多问题,开发新型、高效、稳定且环境友好的非钒基NH3-SCR催化剂体...     

A new biosynthetic tracer for the inline measurement of virus retention in membrane processes: part II. Biochemical and physicochemical characterizations of the new tracer

In a previous work, a reproducible procedure to produce a new biosynthetic tracer was developed. This new tracer is an MS2 bacteriophage with enzymatic probes grafted on its surface, which can induce enzymatic activity of the tracer. In this paper, the biochemical and physicochemical characteristics of this new tracer are determined. A protocol was developed to determine the specific enzymatic activity kcat_TRACER of the tracer, which was found to be 2.93 ± 0.78 × 10⁴ min⁻¹ on average. Physicochemical characterizations of this new tracer showed that it is representative of viruses and may thus be used as a virus surrogate to assess the virus retention of membrane systems inline. Notably, the mean diameter and molecular weight of the tracer were found to be respectively 64.1 ± 0.3 nm and 12140 ± 3654 kDa, which are within the size and molecular weight ranges of pathogenic viruses carried by water. The tracer surface was also studied and revealed the considerable porosity of the grafted probe layer, with a mean porosity of 88%, which could explain why the zeta potential of the tracers (−14.34 ± 1.66 mV) was nearly the same as that of the native MS2 phages. Finally, a comparison between filtration of the reference microorganism used for membrane performance assessment (the MS2 phage) and the tracer suspensions showed the same filtration behaviour.     

免疫亲和柱净化-液相色谱-串联质谱法测定中药材中的14种真菌毒素

依次采用磷酸盐缓冲液(PBS)和甲醇-PBS溶液提取样品,以多功能免疫亲和柱净化,采用液相色谱-串联四极杆质谱检测,可同时测定中药材中的黄曲霉毒素B1、黄曲霉毒素B2、黄曲霉毒素G1、黄曲霉毒素G2、伏马毒素B1、伏马毒素B2、T-2毒素、HT-2毒素、赭曲霉毒素A(OTA)、玉米赤霉烯酮等14种真菌毒素。优化条件下,真菌毒素的定量限(LOQ)为1～5 μg/kg, 4种中药材基质(人参、桔梗、板蓝根、麦门冬)中3个不同添加水平的平均回收率(n=6)为71.9%～99.7%,相对标准偏差(RSD)为4.8%～15.8%。该方法的检测速度快,中药材复杂基质的干扰较少,结果准确、可靠,定量限可满足国内外中药材真菌毒素相关限量的要求。     

Milli-free flow electrophoresis: I. Fast prototyping of mFFE devices

We coin a term of milli-free flow electrophoresis (mFFE) to describe mid-scale FFE with flow rates intermediate to macro-FFE and micro-FFE (μFFE). Introduced decades ago, mFFE did not find practical applications. We revive mFFE, as we view it as a viable purification complement to continuous synthesis in capillary reactors with product flow rates of ～5 to 2000 μL/min, too small for macro-FFE but too large for μFFE. The development of the tandem of continuous synthesis/purification will require the production and evaluation of a large number of prototypes of mFFE devices. As the first step, we developed a fast (<24 h) and economical (～$10) method for prototyping mFFE devices using a robotic milling machine. mFFE prototypes are constructed from two machined matching poly(methyl methacrylate) (PMMA) substrates, which are bonded in 10 min using dichloromethane to provide a strong and irreversible seal. Using the developed prototyping technology, we designed and evaluated 25 prototypes of mFFE devices. By optimizing the feed rates and rotational speeds of the drills, the depth of the electrode channels, the dimensions of the entrance and exit reservoirs, the sample flow rate, and the diameter and position of the sample input, we were able to achieve indefinitely long operation of the device with cycles of alternating 15-min electrophoresis and 0.5-min regeneration (bubble removal). The test analytes, rhodamine B and fluorescein, were baseline resolved by mFFE for flow rates ranging from 10 to 600 μL/min. These results prove that our prototyping approach is suitable for the challenging task of multi-parameter optimization of mFFE devices.     

Static and dynamic binding capacities of human immunoglobulin G on polymethacrylate based mixed-modal, thiophilic and hydrophobic cation exchangers

The aim of this study was to investigate functional increments of ion exchange type ligands, which may improve the performance of mixed-modal ligands for antibody capture out of feed solutions with pH above 6.0 and containing sodium chloride concentrations of 150 mM and higher. For this purpose several functional groups such as sulfonyl, sulfanyl, amide, methoxy, short alkyl and aromatic moieties were tested in combination with a strong sulfonic acid and/or a weak carboxylic acid group. Therefore a series of ligands were synthesized and subsequently coupled onto epoxide activated Fractogel^® EMD. In the first instance, all materials were tested by static binding capacity measurements (SBC) under test conditions, comprising a wide variety of different sodium chloride concentrations and differing pH values ranging from 4.5 to 7.5. From these preliminary experiment it was found that especially the aromatic groups improved the binding of human immunoglobulin G (h-IgG) under isotonic conditions, while other increments, e.g. thiophilic or amide groups, were not able to increase the capacity significantly. Taking the SBC results into account, the most promising materials were investigated under dynamic binding conditions (DBC) with a reduced selection of test conditions (pH 5.5, 6.5 and 7.4 at 75 and 150 mM NaCl). N-benzoyl-homocysteine (material J) and 3,5-dimethoxybenzoyl-homocysteine (material K) showed 100% DBCs of 37 mg/mL and 32 mg/mL in the presence of 75 mM NaCl and pH 6.5. Material L carrying mercaptobenzoic acid as a ligand and tested with the same solution provided a 100% DBC of 68 mg/mL. The influence of Pluronic F68 in a mock feed solution as well as in cell culture supernatant was investigated with the best performing bio-affinity type adsorbent, material L. For the real sample feed subsequent SDS-PAGE was conducted for the collected fractions.     

便携式FTIR的机动车尾气检测方法

随着汽车排放标准的提高,相关VOC标准从总烃检测变为非甲烷碳氢化合物(NMHC)检测;随着含氧燃料的增加,增加了非甲烷有机气体(NMOG)测量。针对国内汽车尾气分析仪分析组分单一、精度有限、VOCs检测过程复杂等问题,提出了基于便携式FTIR的机动车尾气检测方法,基于立体角镜优化FTIR光学系统结构,提高动镜扫描速度,设计便携式且满足抗振动需求的快速FTIR光谱仪。FTIR红外光源输出波段范围为2～20 μm,分辨率为0.5 cm-1,扫描速度1 Hz,气体池光程为10 m,采用斯特林探测器,其光谱响应范围为600～6 000 cm-1。选择CH₄,C₂H₂,C₂H₄,C₂H₆,C₃H₆,n-C₅H₁₂,i-C₅H₁₂,C₇H₈,HCHO,C₂H₅OH,CH₃CHO这些典型HC化合物作为VOC气体检测的替代物。通过标准谱确定尾气成分的波段为900～1 100和2 700～3 100 cm-1,涵盖所有待测气体吸收波段。基于AVL台架测试,开展NEDC和WLTC工况实验测试,测试车辆为丰田威驰,测试油品为92号国五。便携式FTIR采用抽取方式进行尾气测量,原始的废气样本来自安装在排气管延长部分的多孔探头,前端安装样气取样装置,主要包括颗粒物过滤和除水汽装置,以防止污染FTIR光学系统。实验表明FTIR可以有效快速测量汽车尾气中CO,CH₄,NO和主要HC化合物,在FTIR检测限0.5 μmol·mol-1下会引入噪声信号,浓度可信度降低。通过分析可以看出输出气体平均浓度降级排列依次是：CO,C₂H₄,CH₄,NO,i-C₅H₁₂,C₂H₆,C₇H₈,n-C₅H₁₂,C₂H₅OH,CH₃CHO。从3个循环的NEDC工况可以看出,每种气体排放呈现一致的规律性变化。针对CO进行了SEMTECH-DS与FTIR测量数据的时间序列比较,结果呈现了较好的规律一致性,但是由于FTIR和SEMTECH-DS测量技术和取样稀释系统不同导致二者浓度差异较大。与传统尾气检测技术相比,便携式FTIR测量系统对瞬态事件有良好的响应,可以在线进行多组分浓度实时测量获取机动车的瞬时排放数据,在满足新规测试要求下,也可以为后期的机动车在实际道路上的排放特征分析和模拟提供可靠的数据支持。