Effect of Insoluble Surfactants on Drainage and Rupture of a Film between Drops Interacting under a Constant Force

The deformation, drainage, and rupture of an axisymmetrical film between colliding drops in the presence of insoluble surfactants under the influence of van der Waals forces is studied numerically at small capillary and Reynolds numbers and small surfactant concentrations. Constant-force collisions of Newtonian drops in another Newtonian fluid are considered. The mathematical model is based on the lubrication equations in the gap between drops and the creeping flow approximation of Navier–Stokes equations in the drops, coupled with velocity and stress boundary conditions at the interfaces. A nonuniform surfactant concentration on the interfaces, governed by a convection–diffusion equation, leads to a gradient of the interfacial tension which in turn leads to additional tangential stress on the interfaces (Marangoni effects). The mathematical problem is solved by a finite-difference method on a nonuniform mesh at the interfaces and a boundary-integral method in the drops. The whole range of the dispersed to continuous-phase viscosity ratios is investigated for a range of values of the dimensionless surfactant concentration, Peclét number, and dimensionless Hamaker constant (covering both “nose” and “rim” rupture). In the limit of the large Peclét number and the small dimensionless Hamaker constant (characteristic of drops in the millimeter size range) a fair approximation to the results is provided by a simple expression for the critical surfactant concentration, drainage being virtually uninfluenced by the surfactant for concentrations below the critical surfactant concentration and corresponding to that for immobile interfaces for concentrations above it.     

Time-dependent interaction across two conducting spheres in an applied electrostatic field

Charged particles exist widely in variety of technological areas as well as in nature. Even a weak charge on the particles can significantly influence their electric interaction. We investigated the phenomenon of time-dependent electric interaction between two conducting spheres in an electrostatic field. A mirror-image method was developed to analyze this system, and the fundamental role of the charges on the spheres was studied. We concluded that charges conducted to the lower sphere through the alumina tube used in our system play a main role in determining the time-dependent interaction, whereas the influence from air ions is negligible.     

Resolution enhancement in hydrophobic interaction chromatography via electrostatic interactions

In this work, a new type of hydrophobic stationary phase that provide electrostatic interactions with analytes was developed by bonding β-phenylethylamine as a functional ligand to silica. This stationary phase can separate proteins with similar hydrophobicity that traditional hydrophobic resins cannot. Hen egg white was separated to examine the selectivity. The results show that the introduced electrostatic interactions are an important factor for the resolution enhancement and the new resin could have important applications in separation and purification of biological macromolecules.     

Two stage electrostatic separator for the recycling of plastics from waste electrical and electronic equipment

The aim of study was to evaluate the effectiveness of a new facility for recycling of plastics from granular waste electrical and electronic equipment. The installation consists of two sections, the products of a first tribo-aero-electrostatic separator being subsequently treated in two free-fall electrostatic separators. The tests were performed on a mixture of polycarbonate (PC) and polyamide (PA). Analysis of the purity of the products obtained was performed using a program of image processing in MATLAB. Products of very high purity (roughly 95% for both PC and PA) were obtained at a recovery rate higher than 70%.     

Role of self-assembled surfactant structure on the spreading of oil on flat solid surfaces

Uniform spreading of oil on solid surfaces is important in many processes where proper lubrication is required and this can be controlled using surfactants. The role of oil–solid interfacial self-assembled surfactant structure (SASS) in oil spreading is examined in this study for the case of hexadecane-surfactant droplet spreading on a flat horizontal copper surface, with triphenyl phosphorothionate surfactants having varying chain lengths (0 to 9). It is shown that the frictional forces (F_SASS) as determined by the SASS regulate droplet spreading rate according to surfactant chain length; surfactants with longer chains led to higher reduction in the spreading rate. The extent of such forces, F_SASS, depends on the surfactant density of the evolving SASS, and specific configuration the evolving SASS exhibit as per the orientations of the surfactant chains therein. Thus, F_SASS = [k₁ + k_2(t)] Γ_δ(t), where Γ_δ(t) is the surfactant adsorption density of SASS at time ‘t’ during evolution, and, k₁ and k_2(t) are the force coefficients for Γ_δ(t) and orientations (as a function of spreading time) of the surfactant chains respectively. As a SASS evolves/grows along with adsorption of surfactants at the spreading induced fresh interface, the k₁Γ_δ(t) component of F_SASS increases and contributes to reduction in the net spreading force (S). With a decrease in the net spreading force, the existence of a cross-over period, during which the transition of the spatial dynamics of the chains from disordered to realignment/packing induced ordered orientation occurs, has been inferred from the F_SASS vs. chain length relationships. Such relationships also suggested that the rate of realignment/packing is increased progressively particularly due the realignment/packing induced decrease in the net spreading force. Therefore, the realignment process is a self-induced process, which spans a measurable period of time (several minutes), the cross-over period, during which the net spreading force decreases essentially due to such self-induced process.     

Stimuli-Responsive Purely Organic Room-Temperature Phosphorescence Materials

This Minireview summarizes the recent progress of stimuli-responsive purely organic phosphorescence materials. Organic phosphorescence is closely related to the intermolecular interactions, because such interactions are beneficial to promote spin orbital coupling (SOC) and boost intersystem cross (ISC) efficiency and finally are conducive to satisfactory phosphorescence. It is found that the intermolecular interactions, which are essential for organic phosphorescence, are easily disturbed by external stimuli such as mechanical force, photon, acid, chemical vapor, leading to the luminescence change. According to this principle, various purely organic phosphorescence materials sensitive to external stimuli have been developed. This Minireview categorizes reported stimuli-responsive purely organic phosphorescence materials on the basis of different stimuli, including mechanochromism, mechanoluminescence, photoactivity, acid-responsiveness and other stimuli. Some prospective strategies for constructing stimuli-responsive purely organic phosphorescence molecules are provided.     

Langmuir wave phase-mixing in warm electron-positron-dusty plasmas

An analytical study on nonlinear evolution of Langmuir waves in warm electron-positron-dusty plasmas is presented. The massive dust grains of either positively or negatively charged are assumed to form a fixed charge neutralizing background. A perturbative analysis of the fluid-Maxwell's equations confirms that the excited Langmuir waves phase-mix and eventually break, even at arbitrarily low amplitudes. It is shown that the nature of the dust-charge as well as the amount of dust grains can significantly influence the Langmuir wave phase-mixing process. The phase-mixing time is also found to increase with the temperature.     

Substituent Effect on the Electronic Structure of Sulfines: Molecular Orbital Treatment

The electronic structure and ground state properties of the gaseous sulfine H₂CSO and some of its derivatives were studied at the RHF, MP2, and B3LYP levels. The calculations showed that the Z-isomer is more stable than the E-one and their difference in energy depends on their level of calculation, basis set, and substituent. The factors affecting the isomer stability are the electrostatic interactions, the steric factor, and π-electrons delocalization. The substituent has little effect on the geometry of the CSO moiety but greatly affects its charge distribution and polarizability. The ΔE value of the E- to Z-isomerization process via rotation of the S═O bond was calculated. The substituent has an appreciable effect on both the geometry and energy barrier of isomerization depending on its electronegativity, electrostatic attraction, and effect on π-delocalization over the molecule.     

Torsion balances with fibres of zero length

Torsion balances have good immunity to tilt and low rotational stiffness. However precise control of the position of the suspended torsion ‘bob’ is difficult in the presence of ground vibrations and tilt and this is a limiting factor in applications where Casimir forces or putative non-Newtonian short-range forces are being measured. We describe how the desirable characteristics of torsion balances can be reproduced in a rigid body that is suspended using applied forces rather than a torsion fibre. The suspension system can then provide a more precise control of the degrees of freedom of the suspended body. We apply these ideas to a superconducting levitated torsion balance, developed by the authors, and a generic electrostatic suspension. We present results of preliminary experiments that provide support for our analyses.