Improved photoelectrochemical hydrogen production over decorated titania with copper and nickel oxides by optimizing the photoanode and reaction characteristics

We optimized photocatalytic hydrogen production over TiO₂-based photocatalyst by varying the dopant (nickel and copper oxide), thin film active area, nature and concentration of sacrificial agents, and light intensity in a photoelectrochemical (PEC) cell/dye-sensitized solar cell (DSSC). Various characterization techniques have been used to investigate the structural, morphological, optical, and PEC behavior of single and codoped TiO₂. The TiO₂ decorated with both Cu and Ni oxides with active area of 1 cm² in a mixture of 5 vol % glycerol and 1 M KOH under light intensity of 100 mWcm^?2 produced the maximum hydrogen of 338.4 μmol cm^?2 for 2 h. The superior photocatalyst performance of this photocatalyst is attributed to its small crystallite size and large pore size, as confirmed by X-ray diffractometer, Transmission electron microscopy (TEM), and surface area of Brunauer-Emmet-Teller (S_BET). The absorption edges of this photocatalyst had the highest red shift compared with single doped and pure TiO₂ because of more indirect transitions of the photoexcited electrons, greater charge carrier separation, and lower recombination rate. The photoanode active area of 1 cm² with better photocatalytic performance correlated with the number of defects and grain boundaries. Glycerol shifted the conduction band of the photocatalyst to more negative flat potential compared with others. Increasing the concentration of glycerol further than 5 vol% saturated the photocatalyst active sites, increased photooxidation intermediates of glycerol, and reduced the hydrogen production. The light intensity had the maximum impact on the hydrogen production and could strongly control the number of charge carriers in both the PEC cell and the DSSC.     

Baicalin induces apoptosis in human osteosarcoma cell through ROS-mediated mitochondrial pathway

Baicalin is extracted from a traditional Chinese herb, Scutellaria baicalensis. In this study, the anticancer activity and underlying mechanisms of baicalin towards human osteosarcoma cell (HOS) were investigated. Baicalin could inhibit HOS cell proliferation in a concentration-dependent manner. Mitochondrial membrane potential decreased obviously after treated with different concentration of baicalin by flow cytometry assay and revealed that baicalin triggered a significant generation of reactive oxygen species (ROS). Western blotting assay further revealed that baicalin-induced cell apoptosis by suppressing Bcl-2 level, then activating caspase-9 and caspase-3. In vivo experiment, baicalin significantly suppressed tumour growth in female BALB/C nude mice bearing HOS tumours. In addition, baicalin did show toxicity to treated animal by comparing the body weight increase and mortality. In general, the present results demonstrated that baicalin-induced apoptosis in human osteosarcoma cell via a ROS-mediated mitochondrial pathway. The paper indicated that baicalin is a promising candidate for the treatment of HOS.     

Hetaryl- and heteroarylvinyl-substituted nitrofurans identified as non-cytotoxic selective antitubercular agents

New (E)-5-[2-(5-nitrofuran-2-yl)vinyl]-1,2,4-oxadiazoles and 5-(5-nitrofuran-2-yl)-1,2,4-oxadiazoles were synthesized via the base-promoted condensation of nitrofuran-containing acyl chlorides with amidoximes. Testing these compounds against Gram-negative E. coli, Gram-positive B. subtilis and S. aureus as well as M. tuberculosis HRv37 strain revealed three compounds being selectively antimycobacterial. None of these compounds displayed any cytotoxicity towards human pancreatic epithelioid carcinoma cell line, PANC-1.     

染料敏化太阳能电池载流子传输的数值模拟

由于在染料敏化太阳能电池(dye-sensitized solar cell, DSSC)中存在染料弛豫、半导体薄膜中电子与氧化态染料分子发生反应和电子在电解质中与氧化态离子复合等不利反应,利用一个更完善的DSSC载流子传输模型对电池的光电性能进行模拟就显得非常重要。为此,本文基于由多重俘获理论建立的DSSC中的包括电子、染料阳离子、碘化物和三碘化物在内的载流子传输模型,数值模拟得到了不同TiO₂薄膜厚度、不同入射光强度与不同染料分子吸收系数下DSSC的J-V曲线。结果表明,随着TiO₂薄膜厚度的增加,太阳能电池的短路电流密度增大,开路电压减小,光电转换效率先增大后减小。当DSSC的TiO₂薄膜厚度为20 μm时,光电转换效率达到最大值7.41%,同时光电转换效率随入射光强度与染料分子吸收系数的增大均有一定程度提高,其中在吸收系数为4 500 cm^-1时,光电转换效率为6.73%。以上结果可以为改进DSSC的光电性能提供理论指导。     

A high dispersed Pt0.35Pd0.35Co0.30/C as superior catalyst for methanol and formic acid electro-oxidation

Pt：Pd：Co ternary alloy nanoparticles were synthesized by sodium borohydride reduction under nitrogen, and were supported on carbon black as catalysts for methanol and formic acid electro-oxidation. Compared with Pt0.65C00.35/C, Pt/C, Pd0.65C00.35/C, and Pd/C catalyst, Pt0.35Pd0.35Co0.30/C exhibited relatively high durability and strong poisoning resistance, and the Pt-mass activity was 3.6 times higher than that of Pt/C in methanol oxidation reaction. Meanwhile, the Pt0.35Pd0.35Co0.30/C exhibited excellent activity with higher current density and higher CO tolerance than that of Pt0.6sCo0.35/C, Pt/C, Pd0.65C00.35/ C, and Pd/C in formic acid electro-oxidation.     

New strategy for reversal tolerant anode for automotive polymer electrolyte fuel cell

New approach for the reversal tolerant anode for polymer electrolyte membrane fuel cell is suggested by using the multifunctional IrRu alloy catalyst having concurrent superior activities towards hydrogen oxidation reaction and oxygen evolution reaction to mitigate the degradation of anode under the fuel starvation condition.     

Electrochemical synthesis of α,α-dihaloacetophenones from terminal alkyne derivatives

By virtue of electrochemistry, a series of α,α-dihaloacetophenones were easily obtained with good to excellent yields. This electrochemical procedure was taken in a divided cell with constant current in aqueous media. The reaction can be carried out smoothly at room temperature under metal and oxidant free condition, which provides an eco-friendly synthesis for the α,α-dihaloacetophenone derivatives.     

Exploring the relevance of thiophene rings as bridge unit in acceptor‐bridge‐donor dyes on self‐aggregation and performance in DSSCs

The possibility of dye charge recombination in DSSCs remains a challenge for the field. This consists of: (a) back‐transfer from the TiO₂ to the oxidized dye and (b) intermolecular electron transfer between dyes. The latter is attributed to dye aggregation due to dimeric conformations. This leads to poor electron injection which decreases the photocurrent conversion efficiency. Most organic sensitizers are characterized by an Acceptor‐Bridge‐Donor ( A ‐Bridge‐ D ) arrangement that is commonly employed to provide charge separation and, therefore, lowering the unwanted back‐transfer. Here, we address the intermolecular electron transfer by studying the dimerization and photovoltaic performance of a group of A ‐Bridge‐ D structured dyes. Specifically, eight famous sulfur containing π‐bridges were analyzed ( A and D remained fixed). Through quantum mechanical and molecular dynamics approaches, it was found that the formation of weakly stabilized dimers is allowed. The dyes with covalently bonded and fused thiophene rings as Bridges, 6d and 7d as well as 8d with a fluorene, would present high aggregation and, therefore, high probability of recombination processes. Conversely, using TiO₂ cluster and surface models, delineated the shortest bridges to improve the adsorption energy and the stability of the system. Finally, the elongation of the bridge up to 2 and 3 units and their photovoltaic parameters were studied. These results showed that all the sensitizers are able to provide similar photocurrent outcomes, regardless of whether the bridge is elongated. © 2017 Wiley Periodicals, Inc.     

Sensing lymphoma cells based on a cell-penetrating/apoptosis-inducing/electron-transfer peptide probe

To electrochemically sense lymphoma cells (U937), we fabricated a multifunctional peptide probe that consists of cell-penetrating/apoptosis-inducing/electron-transfer peptides. Electron-transfer peptides derive from cysteine residue combined with the C-terminals of four tyrosine residues (Y₄). A peptide whereby Y₄C is bound to the C-terminals of protegrin 1 (RGGRLCYCRRRFCVCVGR-NH₂) is known to be an apoptosis-inducing agent against U937 cells, and is referred to as a peptide-1 probe. An oxidation response of the peptide-1 probe has been observed due to a phenolic hydroxyl group, and this response is decreased by the uptake of the peptide probe into the cells. To improve the cell membrane permeability against U937 cells, the RGGR at the N-terminals of the peptide-1 probe was replaced by RRRR (peptide-2 probe). In contrast, RNRCKGTDVQAWY₄C (peptide-3 probe), which recognizes ovalbumin, was constructed as a control. Compared with the other probes, the change in the peak current of the peptide-2 probe was the greatest at low concentrations and occurred in a short amount of time. Therefore, the cell membrane permeability of the peptide-2 probe was increased based on the arginine residues and the apoptosis-inducing peptides. The peak current was linear and ranged from 100 to 1000 cells/ml. The relative standard deviation of 600 cells/ml was 5.0% (n = 5). Furthermore, the membrane permeability of the peptide probes was confirmed using fluorescent dye.