Flow amperometric detection of indigo for enzyme-linked immunosorbent assays with use of screen-printed electrodes

A simple and automated methodology for a sensitive electrochemical detection of enzyme immunoassays that employ alkaline phosphatase (AP) as label has been developed. A flow injection system with programmable pump, valve and cell functions, amperometric detection of indigo and screen-printed electrodes (SPEs) are responsible for the advantages of this methodology. Amperometric detection at a low potential of indigo, the product of the enzymatic hydrolysis of the substrate 3-indoxyl phosphate (IP), is combined with a flow injection system. This incorporates in the flow cell a disposable screen-printed board provided with a graphite working electrode. No electrode pretreatment is necessary to obtain reproducible signals. The system was applied to the determination by an enzyme-linked immunosorbent assays (ELISA) of pneumolysin (PLY), a toxin related to respiratory infections. Linear calibration curves for low and high concentration ranges were obtained. These were also performed in a proteic matrix and linearity was also obtained.     

Ozone as an oxygen source for alkene ene-reactions

Summary A strategy was developed which uses the adduct of ozone and triphenyl phosphite as a substitute for photochemically generated singlet oxygen in ene reactions of olefins. The resulting allylic hydroperoxide can be conveniently reduced by a second mole of phosphite to yield the corresponding allylic alcohol. The aryl phosphate produced as the by-product can either be recycled by reduction or used itself as a commodity. As an example, the two key steps of the rose oxide synthesis involving singlet oxygen can thus be reduced to a one pot procedure. With respect to the reaction mechanism, additional arguments for the direct reaction of the olefin with the phosphite ozonide were gathered. A simple decomposition of the ozonide to produce singlet oxygen was made rather unlikely.

---

Ozon als Sauerstoffquelle für En-Reaktionen von Olefinen

Zusammenfassung Es wurde eine Strategie zum Ersatz von photochemisch erzeugtem Singlett-Sauerstoff durch das Addukt aus Ozon und Triphenylphosphit zum Einsatz in En-Reaktionen von Olefinen entwickelt. Das entstehende allylische Hydroperoxid kann durch ein zweites Molekül Phosphit einfach zum entsprechenden allylischen Alkolhol reduziert werden. Das als Nebenprodukt entstehende Arylphosphat kann entweder durch Reduktion recycliert oder direkt als Handelsware weiterverwendet werden. Auf diese Weise können zum Beispiel die beiden Stufen der Rosenoxidsynthese, an denen Singlett-Sauerstoff beteiligt ist, zu einer Eintopfreaktion vereinfacht werden. Bezüglich des Reaktionsmechanismus wurden zusätzliche Hinweise auf die direkte Reaktion des Phosphitozonids mit dem Olefin gefunden. Eine Zersetzung des Ozonids unter Bildung von Singlettsauerstoff ist nicht wahrscheinlich.

     

The structural phase transitions of aminoguanidinium(1+) dihydrogen phosphate—study of crystal structures, vibrational spectra and thermal behavior

Aminoguanidinium(1+) dihydrogen phosphate was prepared by crystallization from aqueous solution. On the basis of the results of DSC measurements, X-ray structural analysis was carried out at temperatures of 160, 215 and 293 K for three aminoguanidinium(1+) dihydrogen phosphate phases ( |Z=2|non-ferroic |melting point 408 K; II |201-222 K|(2) |Z=2|non-ferroic|-; III |<201 K|(2)|Z=4|non-ferroic|-). The triclinic unit cell dimensions (a=6.8220(2), b=7.1000(2), c=7.4500(2) Å, α=86.925(2)°, β=80.731(2)°, γ=79.630(2)°, V=350.21(2) Å³—phase I) are similar for all three structural phases with the exception of phase III, where doubling of the c-axis length leads to an increase in the volume to 692.34(3) Å³. The crystal structure of all three modifications consists of parallel layers of dihydrogen phosphate anions that are interconnected by aminoguanidinium(1+) cations through hydrogen bonds of the N-H…O type. The planar aminoguanidinium(1+) cations are oriented almost parallel to each other and are perpendicular to the anion layers. The primary differences amongst phases I, II and III lie in the location of the H atom in the short O-H…O bonds connecting the dihydrogen phosphate anions in layers. The FTIR and FT Raman spectra of natural and deuterated compounds were recorded and interpreted. The FTIR spectra were studied down to a temperature of 90 K.     

Hydrogen Gas Sensing of High Electrical Conducting-P2O5-SiO2 Glasses Prepared by Sol-Gel Process

High proton-conducting P₂O₅-SiO₂ glass was applied to the electrolyte of the hydrogen concentration cell for hydrogen gas sensing. 5P₂O₅·95SiO₂ glass was prepared using the sol-gel method and its electrical conductivity and electromotive force were measured at 50°C as a function of both the ambient humidity and hydrogen gas concentration. The electrical conductivities increased with increasing humidity and reached 10^–2 S/cm at 90% relative humidity. The electromotive force of the hydrogen concentration cell, where the glass was used as a membrane, showed good Nernstian response to hydrogen pressure in the high relative humidity region.     

Enhanced Oxidation of Simvastatin at a Multi‐Walled Carbon Nanotubes‐Dihexadecyl Hydrogen Phosphate Composite Modified Glassy Carbon Electrode and the Application in Determining Simvastatin in Pharmaceutical Dosage Forms

A sensitive electrochemical method for the determination of simvastatin (SV) was established, based on the enhanced oxidation of SV at a multi‐walled carbon nanotubes‐dihexadecyl hydrogen phosphate composite modified glassy carbon electrode (MWNTs‐DHP/GCE). The voltammetric studies showed that MWNTs instead of DHP or GCE could effectively catalyze the oxidation of SV. The dependence of oxidation current on SV concentration was explored under optimal conditions, which exhibited a good linear relationship in the range of 1.0×10^?7–7.5×10^?6 M. The detection limit of SV was also examined and a low value of 5.0×10^?8 M was obtained for 5 min accumulation (σ=3). This electrode was applied to the detection of SV in drug forms and the results were in accordance with those obtained by UV spectroscopy.     

Catalytic Kinetic Spectrophotometric Method for Determination of Phosphate Ion

The kinetic method for the determination of phosphate microamounts was described. The developed method is based on catalytic effect of phosphate on sodium pyrogallol-5-sulphonate （PS） by dissolved oxygen. The reaction was followed spectrophotometrically by measuring the rate of change in the values of the absorbance of the oxidation product at 437 nm. The optimum reaction conditions are PS （0.44×10^-3 mol·L^-1） and HClO4 （3.6×10^-6 mol·L^-1） at 25 ℃. Following this procedure, phosphate can be determined with a linear calibration graph up to 0.23 μg·mL^-1. The interference effect of several species was also investigated and it was found that the most common cations and anions did not interfere with the determination. The developed procedure was successfully applied to the determination of phosphate in natural waters and soil.     

Rapid transacylations of activated ester substrates bound to the primary side β-cyclodextrin-cyclen conjugate and its M2+ complexes

The ability of cyclodextrins to effect rapid transacylations of bound substrates has been well studied. One important difference between cyclodextrin and enzyme-mediated transacylation is the pH required. Because the pK _a of a cyclodextrin secondary-side hydroxyl group is about 12, transacylations are accelerated in the presence of cyclodextrin under basic conditions (pH > 10.5). In 1988, our group reported the synthesis of cyclodextrin with attached cyclen-Co(III) complexes; significant acceleration in the reaction withp-nitrophenyl acetate was observed only with the primary side derivative. Of course, metalloenzymes utilize M²⁺ and not M³⁺ catalytic centers; in addition, large rate accelerations in the transacylations of both activated and unactivated substrates have been observed previously in systems utilizing M²⁺ ions (e.g., Zn, Cu, Ni) as well as M³⁺ ions (e.g. Co, Ir, Cr). In this paper, we describe the ability of CD-cyclen-M²⁺ conjugates to transacylate activated esters, amides, and phosphates. In addition, the ability of the apoenzyme mimic to effect transacylations was examined.     

Ion association in calcium phosphate solutions at 37°C

Ion association in the system Ca(OH)₂–H₃PO₄–KCl–H₂O at 37°C has been studied potentiometrically over a range of pH from 3 to 9. The experimental conditions were optimized for the accurate determination of the association constants for the formation of the ion pairs CaH₂PO ₄ ⁺ , CaHPO₄ and CaPO ₄ ^– which were found to be 27.9±0.1, 591±2, and (1.35±0.02)×10⁶ L-mol^–1, respectively.     

Solubility of (UO2)3(PO4)2?4H2O in H+-Na+-OH?-H2PO?4-HPO2?4-PO3?4-H2O and Its Comparison to the Analogous PuO2 +2 System

The objectives of this study were to address uncertainties in the solubility product of (UO₂)₃(PO₄)₂⋅4H₂O(c) and in the phosphate complexes of U(VI), and more importantly to develop needed thermodynamic data for the Pu(VI)-phosphate system in order to ascertain the extent to which U(VI) and Pu(VI) behave in an analogous fashion. Thus studies were conducted on (UO₂)₃(PO₄)₂⋅4H₂O(c) and (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubilities for long-equilibration periods (up to 870 days) in a wide range of pH values (2.5 to 10.5) at fixed phosphate concentrations of 0.001 and 0.01 M, and in a range of phosphate concentrations (0.0001–1.0 M) at fixed pH values of about 3.5. A combination of techniques (XRD, DTA/TG, XAS, and thermodynamic analyses) was used to characterize the reaction products. The U(VI)-phosphate data for the most part agree closely with thermodynamic data presented in Guillaumont et al.,⁽¹⁾ although we cannot verify the existence of several U(VI) hydrolyses and phosphate species and we find the reported value for formation constant of UO₂PO⁻₄ is in error by more than two orders of magnitude. A comprehensive thermodynamic model for (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubility in the H⁺-Na⁺-OH⁻-Cl⁻-H₂PO⁻₄-HPO²⁻₄-PO³⁻₄-H₂O system, previously unavailable, is presented and the data shows that the U(VI)-phosphate system is an excellent analog for the Pu(VI)-phosphate system.     

Location of type B carbonate ion in type A-B carbonate apatite synthesized at high pressure

The structure of a complex, disordered type A-B carbonate apatite (CAp) of approximate composition Ca₁₀(PO₄)_6−y(CO₃)_x+(3/2)y(OH)_2−2x, x-0.7, y-0.6, synthesized at 3 GPa, 1400°C has been determined using single-crystal X-ray diffraction and FTIR spectroscopy at room temperature and pressure. Crystal data are: hexagonal, space group P6₃/m, Z=1; a=9.5143(3), c=6.8821(2) Å, V=539.5 Å³, and R=0.025. There are three structural locations for the carbonate ion. The channel carbonate is mainly in the closed vertical configuration of the structure, with two of its oxygen atoms close to the c-axis (A1 carbonate; IR bands at 1541 and 1449 cm⁻¹), but subordinate amounts are also located in an open vertical configuration (A2 carbonate; IR bands at 1563 and 1506 cm⁻¹). The type B carbonate ion is located close to the sloping faces of the PO₄ tetrahedron (IR bands at 1474 and 1406 cm⁻¹), confirming earlier inferences from polarized IR spectra.